|Brand||APPROVED SUPPLIER||Pack Quantity||10|
|Connection Type||Male||Pipe Thread||1/8 in.|
|Grade||CA360||Series||100 'B' Series Barb-Tite|
|Hose Cutoff Factor||0.65 in.||Shape||Pipe|
|Hose End Style||Rigid||System of Measurement||Fractional|
|Hose I.D.||1/4 in.||Tube/Pipe Hex Size||7/16 in.|
|Item||Field Attachable Hose End||Working Pressure (PSI)||Determined by maximum working pressure for hose size|
- Male Pipe Hose End.
- 100 'B' Series.
- Material: CA360 brass
- Hose Inside Diameter: 1/4
- Pipe Size: 1/8
- Thread Size: 1/8–27
- Cut-Off Factor: 11/16
- Applications: Low pressure shop or service air lines.
- Cross Reference: 10004B-102
- For use with H100, H101, and H201 Hose.
Lubricate insert. Hold hose at angle and push on and up over first barb. Continue to push straight on until hose is seated under protective plastic cap.
Split hose, but do not cut completely through hose because the sealing edge of barb could be damaged. Bend hose and remove with quick pull.
Lot tracked item
|WEATHERHEAD||10004B-102||BARB TITE 10004B-102|
|UNSPSC CODES||40141700||BARB TITE 10004B-102|
|VMRS (ATA) CODES||053-008-004||BARB TITE 10004B-102|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here