DOT Approved Union Tee, Air Brake Push-To-Connect Fitting, Brass, 3/8 x 3/8 x 1/4"
#91917 | Pkg Qty: 5
System of Measurement
Temperature Range (Deg. F)
-40 to +200 deg. F
Tube Outside Diameter
3/8 x 3/8 x 1/4 in.
Up to 150 psi
D.O.T. FMVSS 571.106 and SAE J1131
Push In Air Brake Fitting
- Quick Disconnect Simply Push Tubing In, No Tools Or Loose Parts To Handle In Tight Places.
- DOT Approved.
- Typical Applications: Windows, Door Locks, Mirrors, Wipers, Air Operated Seats, Operating Gauges, Air Horns, Heater Controls, Gear Shifts, Fifth Wheels, And Air Brake Connections.
- Working Pressure: 250 PSI
- Temperature Range: -20° F. To 200° F.
- Applicable Standards: Fmvss-106
- For Use With: Sae J844 Type A And B.
- Tube Outside Diameter: 3/8 X 3/8 X 1/4
|Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out.||Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed.|
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Dot Union Tee 3/8 X 3/8 X1/4
|UNSPSC CODES||27131600||Air fittings and connectors|
|VMRS (ATA) CODES||053-008-004||Fittings|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here