Share
Print
EATON
DOT Approved, Quick Connect, Brass, 3/8"
Technical Specifications
Brand
EATON
Mfr. Part Number
1800KX6
Brass DOT Push-to-Connect Fittings Type
Connectors
Package Quantity
1
DOT Approved
Yes
Shipping Weight
0.01 lb.
Fitting Style
Push-To-Connect
System of Measurement
Fractional
Fitting Type
Push-To-Connect
Tube Outside Diameter
3/8 in.
Material
Brass
Vibration Resistance
Moderate
Meets Standards
DOT FMVSS 571.106 and SAE J1131
Product Description
- 3/8" Collet repair kit
- Consisting of a replacement collet and replacement o-ring, the collet repair kits provide an opportunit to repair damaged Q-CAB connectors.
- Used with:SAE J844 Type A and B Eaton Air Brake Tubing
- Meets D.O.T. FMVSS 571.106 and SAE J1131 air brake system performance requirements.
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Collet Repair Kit, 3/8
Name | Item | Description | |
---|---|---|---|
UNSPSC CODES | 27112808 | ||
VMRS (ATA) CODES | 053-006-009 | COLLET RPAIR KIT, 3/8 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here