Share
Print
APPROVED SUPPLIER
Union Elbow, Push-To-Connect Fitting, Brass, 1/8"
Technical Specifications
Brand
APPROVED SUPPLIER
Mfr. Part Number
915110
Brass Non DOT Push-to-Connect Fittings Type
Union Elbow
Package Quantity
5
DOT Approved
No
Shape
Union Elbow
Fitting Type
Push-To-Connect
Shipping Weight
0.16 lb.
Item
Push-To-Connect Fitting
System of Measurement
Fractional
Material
Brass
Tube Outside Diameter
1/8 in.
Product Description
Push Union Elbow 1/8
- Push-To-Connect Union Elbow Fitting .
- Working Pressure: 750 Psi.
- Suitable For Vacuum Service.
- For Use With Polyethylene/Nylon And Polyurethane (90 Durometer And Over) And Soft Metal Tubing.
- Temperature Range: -10° F. To 200° F.
- Tube Outside Diameter: 1/8
Assembly | Disassembly |
Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Push Union Elb 1/8 Non Dot
Name | Item | Description | |
---|---|---|---|
WEATHERHEAD | 1165X2 | UNION ELBOW 1/8 NON-DOT | |
UNSPSC CODES | 27131600 | Air fittings and connectors | |
VMRS (ATA) CODES | 053-008-004 | UNION ELBOW 1/8 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here