Share
Print
NORTON
Norton 2" Crimped Wire Wheel Brush, Carbon Steel, 0.006" Wire Dia., 1/2" Trim Length, 66252839029
Hover over image to magnify
Technical Specifications
Key Specifications
Abrasive Shank Size
1/4 in.
Mfr. Part Number
66252839029
Arbor Hole
No Arbor
Mounting Type
Shank
Brand
NORTON
Package Quantity
1
Brush Diameter
2 in.
Shipping Weight
0.12 lb.
Face Width
3/8 in.
Trim Length
1/2 in.
Fill Material
Carbon Steel
Wire Diameter
0.006 in.
Item
Wire Wheel Brush
Wire Wheel Brush Type
Crimped
Maximum RPM
20000 RPM
General
For Use With
Right Angle, Vertical Shaft Portable Grinders, Die and Pencil Grinders
Product Description
- Shank-mounted wheel brushes are used on straight shaft, die, and pencil grinders, and drills.
- Narrow-faced brushes are ideal for general-purpose brushing of uneven or difficult-to-reach surfaces.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
Crimped Wire Whl Brush 2"
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 483P51 | CRIMP WIRE WHL BRUSH 2" |
 | UNSPSC CODES | 27111907 | |
 | VMRS (ATA) CODES | 053-010-001 | CRIMP WIRE WHL BRUSH 2" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here