Share
Print
4 in. Crimped Wire Wheel Brush, Carbon Steel, 0.014 in. Wire Dia., 1 in. Trim Length
#83481 | Pkg Qty: 1
| Item Number | 83481 |
| Scanner Description | Crimped Wire Whl Brush 4" |
| Inventory Status | In Stock |
| Weight | 0.31 lb |
| Brand | APPROVED SUPPLIER |
| Catalog | J40 |
Technical Specifications
Abrasive Shank Size
1/4 in.
Item
Wire Wheel Brush
Arbor Hole
No Arbor
Maximum RPM
25000 rpm
Brand
APPROVED SUPPLIER
Mounting Type
Shank
Brush Diameter
4 in.
Pack Quantity
1
Face Width
1/2 in.
Trim Length
1 in. in.
Fill Material
Carbon Steel
Wire Diameter
0.014 in.
For Use With
Horizontal Shaft Portable Grinders, Straight Shaft Portable Grinders, Die Grinders, Pencil Grinders
Wire Wheel Brush Type
Crimped
Product Description
- Shank-mounted wheel brushes are used on straight shaft, die, and pencil grinders, and drills
- Narrow-faced brushes are ideal for general-purpose brushing of uneven or difficult-to-reach surfaces
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
| Name | Item | Description | |
|---|---|---|---|
|
Grainger Dropship | 416M40 | CRIMP WIRE WHL BRUSH 4" |
|
UNSPSC CODES | 27111907 | |
|
VMRS (ATA) CODES | 053-010-001 | CRIMP WIRE WHL BRUSH 4" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here