Out of stock. Call your Dedicated Service Advisor for availability.
Share
Print
8 in. Crimped Wire Wheel Brush, Carbon Steel, 0.014 in. Wire Dia., 1-9/16 in. Trim Length
#83471 | Pkg Qty: 1
| Item Number | 83471 |
| Scanner Description | Crimped Wire Whl Brush 8" |
| Inventory Status | Out of Stock |
| Weight | 0.32 lb |
| Brand | APPROVED SUPPLIER |
| Catalog | J41 |
Technical Specifications
Abrasive Shank Size
No Shank
Item
Wire Wheel Brush
Arbor Hole
5/8 in.
Maximum RPM
4000 rpm
Brand
APPROVED SUPPLIER
Mounting Type
Arbor Hole
Brush Diameter
8 in.
Pack Quantity
1
Face Width
1 in.
Trim Length
1-9/16 in. in.
Fill Material
Carbon Steel
Wire Diameter
0.014 in.
For Use With
Bench and Pedestal Grinders
Wire Wheel Brush Type
Crimped
Product Description
- Wheel brushes with arbor holes are used on bench and pedestal grinders.
- Their extra flexibility and lower impact makes these brushes an excellent choice for cleaning irregular surfaces and finer surface finishing, and light to medium duty surface contaminant removal applications.
- Medium-faced brushes clean larger surface areas and have longer life.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
| Name | Item | Description | |
|---|---|---|---|
|
Grainger Dropship | 416L86 | CRIMP WIRE W HL BRUSH 8" |
|
UNSPSC CODES | 27111907 | |
|
VMRS (ATA) CODES | 053-010-001 | CRIMP WIRE W HL BRUSH 8" |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here