3 in. Crimped Wire Wheel Brush, Carbon Steel, 0.014 in. Wire Dia., 3/4 in. Trim Length

3 in. Crimped Wire Wheel Brush, Carbon Steel, 0.014 in. Wire Dia., 3/4 in. Trim Length
Crimped Wire Whl Brush 3"
PI_Asset_988120

#83443 | Pkg Qty: 1

Item Number 83443
Scanner Description Crimped Wire Whl Brush 3"
Inventory Status In Stock
Weight 0.22 lb
Brand APPROVED SUPPLIER
Catalog J40

Technical Specifications

Abrasive Shank Size
1/4 in.
Item
Wire Wheel Brush
Arbor Hole
No Arbor
Maximum RPM
25000 rpm
Brand
APPROVED SUPPLIER
Mounting Type
Shank
Brush Diameter
3 in.
Pack Quantity
1
Face Width
7/16 in.
Trim Length
3/4 in. in.
Fill Material
Carbon Steel
Wire Diameter
0.014 in.
For Use With
Horizontal Shaft Portable Grinders, Straight Shaft Portable Grinders, Die Grinders, Pencil Grinders
Wire Wheel Brush Type
Crimped

Product Description

  • Shank-mounted wheel brushes are used on straight shaft, die, and pencil grinders, and drills.
  • Narrow-faced brushes are ideal for general-purpose brushing of uneven or difficult-to-reach surfaces

Compliance & Restrictions

Prop 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
0834430
  Name Item Description
Grainger Dropship Grainger Dropship 416M52 CRIMPED WIRE WHL BRUSH 3
UNSPSC CODES UNSPSC CODES 27111907
VMRS (ATA) CODES VMRS (ATA) CODES 053-010-001 CRIMPED WIRE WHL BRUSH 3

For more product information by email, click here