Share
Print
APPROVED SUPPLIER
6" Drill Bit 13/64" Dia. 135^ Point
Hover over image to magnify
Technical Specifications
Brand
APPROVED SUPPLIER
Meets Standards
National Aerospace Standard 907 type B
Drill Bit Dimension Type
Fractional Inch
Overall Length
6 in.
Drill Bit Finish
Black Oxide
Package Quantity
1
Drill Bit Point Angle
135 deg.
Point Type
Split Point
Drill Bit Size
13/64 in.
Shank Type
Spring Tempered
Item
Aircraft Drill Bit
Shipping Weight
0.05 lb.
Product Description
Aircraft Extension Drill Bits
- National Aerospace Standard 907 Type B, Type A243 Specifications.
- Aircraft Extension Bits Are Used For Drilling Holes In Hard To Reach Places Because Of Their 12" Length.
- The 135° Split Point Eliminates The Need For Center Punching. This Drill Bit Will Not "Wander", Not Even On Curved Surfaces.
- Shanks Are Spring Tempered To Prevent Bending.
- Jobber Length Flutes.
- Size: 13/64
- Overall Length: 6"
- Decimal Equivalent: .2031
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Cobalt metal powder, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Documents
Item Barcode
6" Drill Bit 13/64" 135°Pt
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 20111614 | |
 | VMRS (ATA) CODES | 053-006-009 | 6" DRILL BIT 3/16" 135^ |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here