Huck Hucktainer HLPP-R12-16PL, 3/8" Diameter FRP Lockbolt Pin, Standard Low Profile Head with PVC Form Head Seal, Grip Range 0.937 - 1.062", Grade 2 Steel, Zinc Clear, Thick/FRP Cladding, 50 PK
Hucktainer® Standard, Low Profile Head Fastener
- Designed To Meet The Requirements Of The Truck Body And Trailer Industries.
- Hucktainers Provide A High Strength, Vibration Resistant, Tamper Proof, Uniform Clamp.
- These Fasteners Will Not Crush Or Craze Frp (Fiberglass Reinforced Plywood) Panels And Are Available With Encapsulated Heads For Maximum Corrosion Resistance.
- PVC Foam Sealant Under The Head Of The Pin Creates A Weatherproof Seal.
- Pin-Lock Is A Nylon "Star" That Retains The Pin In The Hole Prior To Installation And Are Included On Imperial Hucktainers With The "Pl" Suffix On The Huck Reference Number.
- Note: Only Wide Bearing Pin (Hlpe) And/Or Wide Bearing Sleeve (Hlps) Should Be Used Directly Against Frp.
- Grip Range: .937 - 1.062
- Hole Size: .405 - .421
- Maximum Head Width: .830
- Maximum Head Thickness: .180
- Collar Diameter: .396 &Plusmn;. 006
- Under Head To Breakpoint Length: .999
- Under Head To Tip Length: 2.607
- Collar Length: .470
- Huck Cross Reference: Hlpp-R12-16
- Other Grip Ranges, Encapsulated Head Colors, And/Or Encapsulated Head Sizes Available In Bulk Requests.
Compliance & RestrictionsWARNING: This product can expose you to chemicals including Cobalt sulfate, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|UNSPSC CODES||31162207||HUCKTAINER HLPP-R12-16|
|VMRS (ATA) CODES||053-007-014||Rivet|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here