Share
Print
6 in. Crimped Wire Wheel Brush, Carbon Steel, 0.008 in. Wire Dia., 1-1/8 in. Trim Length
#73195 | Pkg Qty: 1
Technical Specifications
Abrasive Shank Size
No Shank
Maximum RPM
8000 rpm
Arbor Hole
5/8 in.
Mounting Type
Arbor Hole
Brand
PFERD
Pack Quantity
1
Brush Diameter
6 in.
Trim Length
1-1/8 in. in.
Face Width
5/8 in.
Wire Diameter
0.008 in.
Fill Material
Carbon Steel
Wire Wheel Brush Type
Crimped
Item
Wire Wheel Brush
Product Description
Wire Wheel Brush (Narrow Face)
- Can Be Used For Cleaning Rust, Scale, And Dirt, Light Deburring, Edge Blending, Roughening For Adhesion, Finishing For Appearance, And Finish Preparation Prior To Painting Or Plating.
- Diameter: 6"
- Standard Arbor Hole: 1/2"Or 5/8"
- Face Width: 5/8"
- Wire Size: .008
- Maximum Rpm: 8,000
- For Use With Right Angle Grinders Or Bench Grinders.
Compliance & Restrictions
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item Barcode
| Name | Item | Description | |
|---|---|---|---|
|
UNSPSC CODES | 27111907 | WIRE WHEEL 6" NARROW |
|
VMRS (ATA) CODES | 053-010-001 | WIRE WHEEL 6" NARROW |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here