|Basic Material||Free Cutting Steel||Material||Low Carbon Steel|
|Brand||APPROVED SUPPLIER||Pack Quantity||10|
|Diameter Range||0.25 in. - 0.262 in.||Shear Strength||54000 lb.|
|Finish||Zinc Plated||System of Measurement||Fractional|
|Item||Taper Pin||Type||Type A|
- Non-threaded press fit fastener
- Commonly used as locking devices, pivots, bearing faces or locating elements where there is not a high degree of end load.
- Length: 1.50"
- Large end diameter: 0.262"
- Small end diameter: 0.250"
- Single shear strength: 54,000 lb
- Material: low carbon steel
- Finish: zinc plated
|UNSPSC CODES||31163203||GROOVED PIN|
|VMRS (ATA) CODES||053-007-025||GROOVED PIN|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here