Grade 9 SAE Hex Nut, 1"-14, Zinc; Trivalent Yellow, Medium Carbon Alloy Steel, Right Hand, 10 PK

Hover over image to magnify
Nut 1-14 SAE Grade 9
Nut 1-14 SAE Grade 9
Grade 9 SAE Hex Nut, 1"-14, Zinc; Trivalent Yellow, Medium Carbon Alloy Steel, Right Hand, 10 PK Video

#41277 | Pkg Qty: 10

Item Number 41277
Scanner Description Nut 1-14 SAE Grade 9
Inventory Status In Stock
Weight 0.35 lb
Brand APPROVED SUPPLIER
Catalog A6

Technical Specifications

Across The Flats
1-1/2 in.
Material
Medium Carbon Alloy Steel
Brand
APPROVED SUPPLIER
Material Grade/Class
Grade 9
Diameter
1 in.
Pack Quantity
10
Finish
Zinc Yellow
System of Measurement
Fractional
Grade
9
Thickness
0.982 in.
Head Type
Hex Head
Thread Direction
Right
Hex Nut Basic Material
Steel
Thread Size
1"-14
Item
Hex Nut
Thread Type
Fine/ SAE/ UNF

Product Description

  • Finished Hex Nut Grade 9 1"-14 SAE The Grade 9 Fastening System Consists Of One Bolt, Two Washers, And A Free-Spinning Nut Produced To Exacting Specifications. The System Is Engineered To Provide Reliable Performance For Severe Service Conditions, And It Is Recommended For Joints Subject To Severe Stress And Vibration. Typical Applications Are Found On Equipment Or Vehicles Used In Off-The-Road Work, Construction, Mining, Amusement Parks, And Truck And Plant Maintenance. Proper Installation Ensures That Service Loads Are Borne By Machine Components Rather Than By The Fasteners. The Grade 9 System Must Be Used As A Complete System With No Substitutes Or Alterations Of Components (Including Lubrication). Substituting Or Altering Any Component Or Altering The Assembled Finishes, Can Cause Fastener Or Joint Failure. Application Features: *Fine Thread.
  • Free-Spinning Nuts.
  • 180,000 Psi Minimum Tensile Strength With Good Ductility.
  • Joint Integrity Assured By: High Clamp Loads, Firm Bearing Surfaces Of Washers.
  • Uniform Minimal Torque Effort From Controlled Surface Finishes.
  • Corrosion Resistance Of Coating On Plated Surfaces.
  • Non-Slip Wrenching With Extra Thick Nuts And Bolt Heads. Design Features: *Heat Treated Alloy Steel Manufactured To Controlled Quality Levels.
  • Generous Fillet Assures Head Integrity And Uniform Transfer Of Load Between Head And Shank.
  • Radius Root Threads Reduce "V-Notch Effect" And "Necking".
  • Through-Hardened, Plated Washers Sustain High Clamp Loads And Reduce Friction During Assembly.
  • Free-Spinning Nuts Are Designed To Meet 180,000 Psi Proof Strength Of The Bolt.

Compliance & Restrictions

Prop 65 WARNING: This product can expose you to chemicals including Cadmium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lot Tracked Item Lot tracked item
Item Barcode
0412770
  Name Item Description
UNSPSC CODES UNSPSC CODES 31161727
VMRS (ATA) CODES VMRS (ATA) CODES 053-007-004 Nut

For more product information by email, click here