Grade L9 SAE Hex Head Cap Screw, 7/8"-14 x 4", Zinc; Trivalent Yellow, Medium Carbon Alloy Steel, 10 PK

Hover over image to magnify
7/8x4 SAE GR9 Hi Strength
PI_Asset_988297
7/8x4 SAE GR9 Hi Strength
PI_Asset_988297
Grade L9 SAE Hex Head Cap Screw, 7/8"-14 x 4", Zinc; Trivalent Yellow, Medium Carbon Alloy Steel, 10 PK Video
Grade L9 SAE Hex Head Cap Screw, 7/8"-14 x 4", Zinc; Trivalent Yellow, Medium Carbon Alloy Steel, 10 PK Video

#27306 | Pkg Qty: 10

Item Number 27306
Scanner Description 7/8x4 SAE GR9 Hi Strength
Inventory Status In Stock
Weight 8.91 lb
Brand APPROVED SUPPLIER
Catalog A6

Technical Specifications

Basic Material
Steel
Head Width
1-5/16 in.
Brand
APPROVED SUPPLIER
Item
Cap Screw
Diameter/Thread Size
7/8"-14
Length Under Head
4 in.
Fastener Diameter
7/8 in.
Material
Medium Carbon Alloy Steel
Fastener Head Height
0.672 in.
Meets Standards
SAE, DIN 931
Fastener Material Grade/Class
Grade L9
Pack Quantity
10
Fastener Thread Style
Partially Threaded
System of Measurement
Fractional
Finish
Zinc Yellow
Thread Direction
Right
Head Type
Hex Head
Thread Type
Fine/ SAE/ UNF

Product Description

  • 7/8"-14X4" Grade 9 Hex Head Cap Screw The Grade 9 Fastening System Consists Of One Bolt, Two Washers, And A Free-Spinning Nut Produced To Exacting Specifications. The System Is Engineered To Provide Reliable Performance For Severe Service Conditions, And It Is Recommended For Joints Subject To Severe Stress And Vibration. Typical Applications Are Found On Equipment Or Vehicles Used In Off-The-Road Work, Construction, Mining, Amusement Parks, And Truck And Plant Maintenance. Proper Installation Ensures That Service Loads Are Borne By Machine Components Rather Than By The Fasteners. The Grade 9 System Must Be Used As A Complete System With No Substitutes Or Alterations Of Components (Including Lubrication). Substituting Or Altering Any Component Or Altering The Assembled Finishes, Can Cause Fastener Or Joint Failure. Application Features: *Fine Thread.
  • Free-Spinning Nuts.
  • 180,000 Psi Minimum Tensile Strength With Good Ductility.
  • Joint Integrity Assured By: High Clamp Loads, Firm Bearing Surfaces Of Washers.
  • Uniform Minimal Torque Effort From Controlled Surface Finishes.
  • Corrosion Resistance Of Coating On Plated Surfaces.
  • Non-Slip Wrenching With Extra Thick Nuts And Bolt Heads. Design Features: *Heat Treated Alloy Steel Manufactured To Controlled Quality Levels.
  • Generous Fillet Assures Head Integrity And Uniform Transfer Of Load Between Head And Shank.
  • Radius Root Threads Reduce "V-Notch Effect" And "Necking".
  • Through-Hardened, Plated Washers Sustain High Clamp Loads And Reduce Friction During Assembly.
  • Free-Spinning Nuts Are Designed To Meet 180,000 Psi Proof Strength Of The Bolt.

Compliance & Restrictions

Lot Tracked Item Lot tracked item
Item Barcode
0273060
  Name Item Description
UNSPSC CODES UNSPSC CODES 31161501
VMRS (ATA) CODES VMRS (ATA) CODES 053-007-005 HHCS SAR GR9 7/8x4

For more product information by email, click here