Share  
Print  
APPROVED SUPPLIER

Grade L9 USS Hex Head Cap Screw, 5/8"-11 x 2-1/2", Zinc Yellow, Steel, 25 PK

Hover over image to magnify
5/8X2-1/2 USS GR9 Hi Strength
PI_Asset_988297
5/8X2-1/2 USS GR9 Hi Strength
PI_Asset_988297
Grade L9 USS Hex Head Cap Screw, 5/8"-11 x 2-1/2", Zinc Yellow, Steel, 25 PK Video
Grade L9 USS Hex Head Cap Screw, 5/8"-11 x 2-1/2", Zinc Yellow, Steel, 25 PK Video

#25242 | Pkg Qty: 25

In Stock

Shipping to 60045
Catalog: A6

Technical Specifications

Key Specifications
Basic Material
Steel
Head Width
15/16 in.
Brand
APPROVED SUPPLIER
Item
Cap Screw
Country of Origin
Varies (subject to change)
Length Under Head
2-1/2 in.
Diameter/Thread Size
5/8"-11
Mfr. Part Number
252420
Fastener Diameter
5/8 in.
Package Quantity
25
Fastener Head Height
0.481 in.
Rockwell Hardness
R/C 38-42
Fastener Material Grade/Class
Grade L9
Shipping Weight
7.15 lb.
Fastener Tensile Strength
40680 psi
System of Measurement
Fractional
Fastener Thread Style
Partially Threaded
Thread Direction
Right
Finish
Zinc Yellow
Thread Length
1-1/2 in.
Head Type
Hex Head
Thread Type
Coarse/ USS/ UNC
General
Meets Standards
ASTM F606

Product Description

  • 5/8 X 2-1/2 Grade 9 Hex Head Cap Screw The Grade 9 Fastening System Consists Of One Bolt, Two Washers, And A Free-Spinning Nut Produced To Exacting Specifications. The System Is Engineered To Provide Reliable Performance For Severe Service Conditions, And It Is Recommended For Joints Subject To Severe Stress And Vibration. Typical Applications Are Found On Equipment Or Vehicles Used In Off-The-Road Work, Construction, Mining, Amusement Parks, And Truck And Plant Maintenance. Proper Installation Ensures That Service Loads Are Borne By Machine Components Rather Than By The Fasteners. The Grade 9 System Must Be Used As A Complete System With No Substitutes Or Alterations Of Components (Including Lubrication). Substituting Or Altering Any Component Or Altering The Assembled Finishes, Can Cause Fastener Or Joint Failure. Application Features: *Coarse Thread.
  • Free-Spinning Nuts.
  • 180,000 Psi Minimum Tensile Strength With Good Ductility.
  • Joint Integrity Assured By: High Clamp Loads, Firm Bearing Surfaces Of Washers.
  • Uniform Minimal Torque Effort From Controlled Surface Finishes.
  • Corrosion Resistance Of Coating On Plated Surfaces.
  • Non-Slip Wrenching With Extra Thick Nuts And Bolt Heads. Design Features: *Heat Treated Alloy Steel Manufactured To Controlled Quality Levels.
  • Generous Fillet Assures Head Integrity And Uniform Transfer Of Load Between Head And Shank.
  • Radius Root Threads Reduce "V-Notch Effect" And "Necking".
  • Through-Hardened, Plated Washers Sustain High Clamp Loads And Reduce Friction During Assembly.
  • Free-Spinning Nuts Are Designed To Meet 180,000 Psi Proof Strength Of The Bolt.

Compliance & Restrictions

Lot Tracked Item
Lot Tracked Item Details
Item Barcode
0252420
5/8X2-1/2 USS GR9 Hi Strength
 NameItemDescription
UNSPSC CODESUNSPSC CODES31161501HX CP PL USS 5/8X2-1/2 L9
VMRS (ATA) CODESVMRS (ATA) CODES053-007-005HX CP PL USS 5/8X2-1/2 L9

For more product information by email, click here