Grade L9 USS Hex Head Cap Screw, 7/16"-14 x 1-1/2", Yellow Zinc Dichromate, Alloy Steel, 50 PK

Hover over image to magnify
7/16x1-1/2 USS GR9 Hi Strength
PI_Asset_988297
7/16x1-1/2 USS GR9 Hi Strength
PI_Asset_988297
Grade L9 USS Hex Head Cap Screw, 7/16"-14 x 1-1/2", Yellow Zinc Dichromate, Alloy Steel, 50 PK Video
Grade L9 USS Hex Head Cap Screw, 7/16"-14 x 1-1/2", Yellow Zinc Dichromate, Alloy Steel, 50 PK Video

#25174 | Pkg Qty: 50

Item Number 25174
Scanner Description 7/16x1-1/2 USS GR9 Hi Strength
Inventory Status In Stock
Weight 4 lb
Brand APPROVED SUPPLIER

Technical Specifications

Basic Material
Steel
Item
Cap Screw
Brand
APPROVED SUPPLIER
Length Under Head
1-1/2 in.
Diameter/Thread Size
7/16"-14
Material
Alloy Steel
Fastener Diameter
7/16 in.
Meets Standards
USS, DIN 933
Fastener Head Height
0.319 - 0.338 in.
Pack Quantity
50
Fastener Material Grade/Class
Grade L9
Rockwell Hardness
38/42-C
Fastener Tensile Strength
180000 psi
System of Measurement
Fractional
Fastener Thread Style
Fully Threaded
Thread Direction
Right
Finish
Zinc Yellow
Thread Length
1-1/2 in.
Head Type
Hex Head
Thread Type
Coarse/ USS/ UNC

Product Description

  • 7/16 X 1-1/2 Grade 9 Hex Head Cap Screw The Grade 9 Fastening System Consists Of One Bolt, Two Washers, And A Free-Spinning Nut Produced To Exacting Specifications. The System Is Engineered To Provide Reliable Performance For Severe Service Conditions, And It Is Recommended For Joints Subject To Severe Stress And Vibration. Typical Applications Are Found On Equipment Or Vehicles Used In Off-The-Road Work, Construction, Mining, Amusement Parks, And Truck And Plant Maintenance. Proper Installation Ensures That Service Loads Are Borne By Machine Components Rather Than By The Fasteners. The Grade 9 System Must Be Used As A Complete System With No Substitutes Or Alterations Of Components (Including Lubrication). Substituting Or Altering Any Component Or Altering The Assembled Finishes, Can Cause Fastener Or Joint Failure. Application Features: *Coarse Thread.
  • Free-Spinning Nuts.
  • 180,000 Psi Minimum Tensile Strength With Good Ductility.
  • Joint Integrity Assured By: High Clamp Loads, Firm Bearing Surfaces Of Washers.
  • Uniform Minimal Torque Effort From Controlled Surface Finishes.
  • Corrosion Resistance Of Coating On Plated Surfaces.
  • Non-Slip Wrenching With Extra Thick Nuts And Bolt Heads. Design Features: *Heat Treated Alloy Steel Manufactured To Controlled Quality Levels.
  • Generous Fillet Assures Head Integrity And Uniform Transfer Of Load Between Head And Shank.
  • Radius Root Threads Reduce "V-Notch Effect" And "Necking".
  • Through-Hardened, Plated Washers Sustain High Clamp Loads And Reduce Friction During Assembly.
  • Free-Spinning Nuts Are Designed To Meet 180,000 Psi Proof Strength Of The Bolt.

Compliance & Restrictions

Lot Tracked Item Lot tracked item
Item Barcode
0251740
  Name Item Description
UNSPSC CODES UNSPSC CODES 31161501 HX CP PL USS 7/16X1-1/2L9
VMRS (ATA) CODES VMRS (ATA) CODES 053-007-005 HX CP PL USS 7/16X1-1/2L9

For more product information by email, click here