Share
Print
APPROVED SUPPLIER
Hex Washer Head High Strength Flange Bolt, Grade 8, 1/2"-20 x 1-1/2", Black Phosphate, Steel, 50 PK
Hover over image to magnify
Technical Specifications
Basic Material
Steel
Length Under Head
1-1/2 in.
Brand
APPROVED SUPPLIER
Material
Steel
Diameter
1/2 in.
Meets Standards
SAE
Finish
Black Phosphate
Package Quantity
50
Flange Bolt Head Type
Hex
Shipping Weight
7.1 lb.
Flange Bolt Material Grade
Grade 8
System of Measurement
Fractional
Flange Bolt Thread Style
Partially Threaded
Tensile Strength
150000 psi
Flange Bolt Type
Standard
Thread Size
1/2"-20
Grade
8
Thread Type
Fine
Item
Flange Bolt
Product Description
High Strength Flange Bolt
- Thread Pitch: 1/2-20 Unf.
- Use Two-Piece (Screw & Nut) System Rather Than A Four-Piece System (One Screw, One Nut, Two Washers).
- Offers Increased Margin Of Safety Between Desired Clamping Load And Ultimate Strength Of Assembly.
- A 30% Increase In Bearing Area Minimizes Brinelling.
- 150,000 Psi.
- Phosphate And Oil Finish.
- Grade 8 Equivalent.
- Product May Be Fully Or Partially Threaded; Subject To Manufacturer Availability
Compliance & Restrictions
Lot Tracked Item Details
Item Barcode
Flng Blt 1/2 X 1 1/2 SAE
| Name | Item | Description | |
|---|---|---|---|
 | UNSPSC CODES | 31161611 | FLANGE BOLT 1/2X1-1/2 |
 | VMRS (ATA) CODES | 053-007-005 | FLANGE BOLT 1/2X1-1/2 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here