|Anchor Diameter||3/4 in.||Material||Zamac Alloy|
|Anchor Length||1-1/4 in.||Pack Quantity||10|
|Application||Mortar, Stone, Solid Masonry||Screw Size||5/16 in.|
|Drill Size||1/2 in.|
- Precision die-cast expansion shield of rustproof alloy.
- Provides anchorage in mortar, stone, and other types of solid masonry.
- Diameter Of Lag Screw: 5/16
- Shield Length: 1-1/4
- Hole Size: 1/2
- Recommended for use with Lag Screws.
Drill recommended hole size. Install anchor flush or slightly below surface.
Insert lag screw through fixture into anchor and tighten.
|UNSPSC CODES||31162101||EXPANSION SH ELD 5/16|
|VMRS (ATA) CODES||053-007-023||EXPANSION SH ELD 5/16|
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here