Share  
Print  
LOK-BOLT

Hex Nut Lok Bolt 3/8" X 3

Hover over image to magnify
Hex Nut Lok Bolt 3/8x3
Hex Nut Lok Bolt 3/8x3

#10504 | Pkg Qty: 25

In Stock

Shipping to 60045
Catalog: B40

Technical Specifications

Anchor Diameter
3/8 in.
Material
Steel
Anchor Length
3 in.
Mfr. Part Number
05020S
Brand
LOK-BOLT
Minimum Embedment
1-1/4 in.
Fastener Finish
Zinc Plated
Pack Quantity
25
Item
Sleeve Anchor
Shipping Weight
2.5 lb.

Product Description

Lok-Bolt™ Hex Nut Sleeve Anchor
  • For Use In Concrete, Block, Brick, And Stone.
  • Made Of Zinc Plated Steel (Astm B-633).
  • Gsa Specification Ff-S-325 Group II, Type 3, Class 3.
  • Size: 3/8 X 3"
  • Use 3/8" Carbide Tipped Masonry Drill Bit, Part No. 70682
  • Installation Procedures Using The Proper Diameter Bit, Drill A Hole Into The Base Material To A Depth Of At Least 1/2" Or One Anchor Diameter Deeper Than The Embedment Required. Blow The Hole Clean Of Dust And Other Material. Do Not Expand The Anchor Prior To Installation. Drive The Anchor Through The Fixture Into The Anchor Hole Until The Head Is Firmly Seated Against The Fixture. Be Sure The Anchor Is Driven To The Required Embedment Depth. Tighten The Anchor By Turning The Nut Or Head 3 Or 4 Turns Or By Applying The Guide Installation Torque From The Finger Tight Position.
Item Barcode
0105040
Hex Nut Lok Bolt 3/8x3
 NameItemDescription
UNSPSC CODESUNSPSC CODES31161611HEX NUT LOK BOLT 3/8x3
VMRS (ATA) CODESVMRS (ATA) CODES053-007-005HEX NUT LOK BOLT 3/8x3

For more product information by email, click here