Share  
Print  
APPROVED SUPPLIER

10-24 Repair Kit

Hover over image to magnify
Thread Repair Kit 10-24
Thread Repair Kit 10-24

#6810 | Pkg Qty: 1

In Stock

Shipping to 60045
Catalog: B11

Technical Specifications

Key Specifications
Brand
APPROVED SUPPLIER
System of Measurement
Fractional
Item
Thread Insert
Temperature Range (Deg. F)
-270 to +774 deg. F
Mfr. Part Number
68100
Thread Insert Kit Style
Coil Thread Repair Kit
Pack Quantity
1
Thread Size
10"-24
Shipping Weight
0.28 lb.
General
Includes
Oversize tap, tool and inserts

Product Description

Coil USS Thread Repair Kit
  • Simple And Easy To Use.
  • Kit Includes Oversize Tap, Tool, And Inserts.
  • Interchangeable With Other Helically Wound Systems.
  • Stronger Assemblies And Reduced Thread Wear.
  • Better Than Original Threads In Most Applications.
  • Corrosion Resistant.
  • Weight Saving.
  • Design Flexibility.
  • Wide Temperature Tolerance (-270° F. To 774° F.).
  • Size: 10-24
  • Number Of Inserts Per Kit: 10
  • Sold Separately:
  • Bit Size: 13/64
  • Required Drill Bit Part No.: 80572 How To Use Drill Tap Install Tang Removal Drill To Clear Out The Damaged Thread (If Necessary). Thread Insert Tap Supplied. Tap Thread Should Match Up With Bolt. Wind Insert In With Light Downward Pressure Until 1/4 To 1/2 Turn Below Surface, Driving Tang Towards Bottom Of The Hole. Remove Tool And Sit Back On Top Of Tang. Tap Down Sharply. Do Not Try To Twist Tang Off. Spark Plug And Large Fine Threads, Use Long Nose Pliers And Pull Tang Out.
Item Barcode
0068100
Thread Repair Kit 10-24
 NameItemDescription
UNSPSC CODESUNSPSC CODES27112810REPAIR KIT 10-24
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009REPAIR KIT 10-24

For more product information by email, click here