Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status

Sheet 0076900

Printer Friendly View
        
SECTION 1: IDENTIFICATION                                                       
 


1.1.  Product Identifier
Product Form:                                                                   
 
Product Name: Pennzoil Multi-Purpose White Grease 705                           
 
CAS No:                                                                         
 
Synonyms:                                                                       
 


1.2.  Intended Use of the Product
Use of the substance/mixture: Automotive and industrial grease.                 
 


1.3.  Name, Address, and Telephone of the Responsible Party
Company                                                                         
 
Shell Oil Products US                                                           
 
P.O. Box 4427                                                                   
 
Houston TX 77210-4427                                                           
 
USA                                                                             
 
Phone: (+1) 877-276-7285                                                        
 


1.4.  Emergency Telephone Number
Emergency     | 877-504-9351, 877-242-7400                                      
 
number        |                                                                 
 

SECTION 2: HAZARDS IDENTIFICATION                                               
 


2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
Chronic       |Category 3    
aquatic       |              
toxicity      |              
              |              
              |              


2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |None
        
Signal Word (GHS-US)         |None
                                      
Hazard Statements (GHS-US)   |PHYSICAL HAZARDS: Not classified as a physical    
 
                             |hazard under GHS criteria.                        
 
                             |HEALTH HAZARDS: Not classified as a health hazard 
 
                             |under GHS criteria.                               
 
                             |ENVIRONMENTAL HAZARDS: H412 Harmful to aquatic
life 
                             |with long lasting effects                         
 
Precautionary Statements     |Prevention: P273 Avoid release to the environment.
 
(GHS-US)                     |Response: No precautionary phrases.               
 
                             |Storage: No precautionary phrases.                
 
                             |Disposal: P501 Dispose of contents/ container to
an 
                             |approved waste disposal plant.                    
 


2.3.  Other Hazards
Other Hazards Not Contributing to the Classification: Prolonged or repeated skin
 
contact without proper cleaning can clog the pores of the skin resulting in     
 
disorders such as oil acne/folliculitis. Used grease may contain harmful        
 
impurities. High-pressure injection under the skin may cause serious damage     
 
including local necrosis. Not classified as flammable but will burn.            
 
The classification of this material is based on OSHA HCS 2012 criteria.         
 


2.4.  Unknown Acute Toxicity (GHS-US)
                                                                                
 

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS                               
 


3.1.  Substance
Name                            |Product identifier   |%       |Classification  
 
                                |                     |        |(GHS-US)        
 
                                |                     |        |                
 
                                |                     |        |                
 
                                |                     |        |                
 
                                |                     |        |                
 
                                |                     |        |                
 


Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification  
 
                                |                     |        |(GHS-US)        
 
zinc oxide                      |1314-13-2            |0.1 -   |                
 
                                |                     |2.4     |                
 
                                |                     |        |                
 
                                |                     |        |                
 
                                |                     |        |                
 
                                |                     |        |                
 


SECTION 4: FIRST AID MEASURES                                                   
 


4.1.  Description of First Aid Measures
First-aid Measures General: Not expected to be a health hazard when used under  
 
normal conditions.                                                              
 
First-aid Measures After Inhalation: No treatment necessary under normal        
 
conditions of use. If symptoms persist, obtain medical advice.                  
 
First-aid Measures After Skin Contact: Remove contaminated clothing. Flush
exposed
area with water and follow by washing with soap if available. If persistent     
 
irritation occurs, obtain medical attention. When using high pressure equipment,
 
injection of product under the skin can occur. If high pressure injuries occur, 
 
the casualty should be sent immediately to a hospital. Do not wait for symptoms
to
develop. Obtain medical attention even in the absence of apparent wounds.       
 
First-aid Measures After Eye Contact: Flush eye with copious quantities of
water. 
If persistent irritation occurs, obtain medical attention.                      
 
First-aid Measures After Ingestion: In general no treatment is necessary unless 
 
large quantities are swallowed, however, get medical advice.                    
 


4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries: Oil acne/folliculitis signs and symptoms may include
formation 
of black pustules and spots on the skin of exposed areas. Ingestion may result
in 
nausea, vomiting and/or diarrhoea. Local necrosis is evidenced by delayed onset
of
pain and tissue damage a few hours following injection.                         
 
Symptoms/Injuries After Inhalation:                                             
 
Symptoms/Injuries After Skin Contact:                                           
 
Symptoms/Injuries After Eye Contact:                                            
 
Symptoms/Injuries After Ingestion:                                              
 
Chronic Symptoms:                                                               
 


4.3.  Indication of Any Immediate Medical Attention and Special Treatment
Needed
Treat symptomatically. High pressure injection injuries require prompt surgical 
 
intervention an d possibly steroid therapy, to minimise tissue damage and loss
of 
function. Because entry wounds are small and do not reflect the seriousness of
the
underlying damage, surgical exploration to determine the extent of involvement
may
be necessary. Local anaesthetics or hot soaks should be avoided because they can
 
contribute to swelling, vasospasm and ischaemia. Prompt surgical decompression, 
 
debridement and evacuation of foreign material should be performed under general
 
anaesthetics, and wide exploration is essential.                                
 

SECTION 5: FIRE-FIGHTING MEASURES                                               
 

5.1.  Extinguishing Media
Suitable Extinguishing Media: Foam, water spray or fog. Dry chemical powder,    
 
carbon dioxide, sand or earth may be used for small fires only.                 
 
Unsuitable Extinguishing Media: Do not use water in a jet.                      
 


5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard: Proper protective equipment including chemical resistant gloves are
 
to be worn; chemical resistant suit is indicated if large contact with spilled  
 
product is expected. Self-Contained Breathing Apparatus must be worn when       
 
approaching a fire in a confined space. Select fire fighter's clothing approved
to
relevant Standards (e.g. Europe: EN469).                                        
 
Explosion Hazard: Hazardous combustion products may include: A complex mixture
of 
airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be
 
evolved if incomplete combustion occurs. Unidentified organic and inorganic     
 
compounds.                                                                      
 
Reactivity:                                                                     
 


5.3.  Advice for Firefighters
Precautionary Measures Fire: Use extinguishing measures that are appropriate to 
 
local circumstances and the surrounding environment.                            
 
Firefighting Instructions:                                                      
 
Protection During Firefighting: Proper protective equipment including chemical  
 
resistant gloves are to be worn; chemical resistant suit is indicated if large  
 
contact with spilled product is expected. Self-Contained Breathing Apparatus
must 
be worn when approaching a fire in a confined space. Select fire fighter's      
 
clothing approved to relevant Standards (e.g. Europe: EN469).                   
 

SECTION 6: ACCIDENTAL RELEASE MEASURES                                          
 


6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Avoid contact with skin and eyes.                             
 


6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                           
 
Emergency Procedures:                                                           
 


6.1.2.      For Emergency Responders
Protective Equipment:                                                           
 
Emergency Procedures:                                                           
 


6.2.  Environmental Precautions
Use appropriate containment to avoid environmental contamination. Prevent from  
 
spreading or entering drains, ditches or rivers by using sand, earth, or other  
 
appropriate barriers.                                                           
 


6.3.  Methods and Material for Containment and Cleaning Up
For Containment: Shovel into a suitable clearly marked container for disposal or
 
reclamation in accordance with local regulations.                               
 
Methods for Cleaning Up:                                                        
 


6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                      
 


SECTION 7: HANDLING AND STORAGE                                                 
 


7.1.  Precautions for Safe Handling
Additional Hazards When Processed: Avoid prolonged or repeated contact with
skin. 
Avoid inhaling vapour and/or mists. When handling product in drums, safety      
 
footwear should be worn and proper handling equipment should be used. Properly  
 
dispose of any contaminated rags or cleaning materials in order to prevent
fires. 
Avoidance of contact : Strong oxidising agents.                                 
 
Hygiene Measures:                                                               
 


7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Use local exhaust ventilation if there is risk of inhalation
 
of vapours, mists or aerosols. Use the information in this data sheet as input
to 
a risk assessment of local circumstances to help determine appropriate controls 
 
for safe handling, storage and disposal of this material.                       
 
Storage Conditions: Other data : Keep container tightly closed and in a cool,   
 
well-ventilated Place. Use properly labeled and closable containers. Store at   
 
ambient temperature.                                                            
 
Packaging material: Suitable material: For containers or container linings, use 
 
mild steel or high density polyethylene. Unsuitable material: PVC.              
 
Container Advice: Polyethylene containers should not be exposed to high         
 
temperatures because of possible risk of distortion.                            
 


7.3.  Specific End Use(s)
                                                                                
 

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION                                
 


8.1.  Control Parameters
                                                                                
 
Components                                                                      
 
CAS-No.                                                                         
 
Value type (Form of exposure)                                                   
 
Control parameters                                                              
 
/ Permissible                                                                   
 
Concentration                                                                   
 
Basis                                                                           
 
                                                                                
 
                                                                                
 
Oil mist, mineral                                                               
 
Not Assigned                                                                    
 
TWA ((inhalable                                                                 
 
fraction))                                                                      
 
5 mg/m3                                                                         
 
US. ACGIH Threshold Limit Values                                                
 
                                                                                
 
                                                                                
 
                                                                                
 
(Mist)                                                                          
 
5 mg/m3                                                                         
 
OSHA_TRA NS                                                                     
 
                                                                                
 


8.2.  Exposure Controls
Appropriate Engineering      |The level of protection and types of controls     
 
Controls                     |necessary will vary depending upon potential      
 
                             |exposure conditions. Select controls based on a
risk
                             |assessment of local circumstances. Appropriate    
 
                             |measures include: Adequate ventilation to control 
 
                             |airborne concentrations. Where material is heated,
 
                             |sprayed or mist formed, there is greater potential
 
                             |for airborne concentrations to be generated.
General
                             |Information: Define procedures for safe handling
and
                             |maintenance of Controls. Educate and train workers
 
                             |in the hazards and control measures relevant to   
 
                             |normal activities associated with this product.   
 
                             |Ensure appropriate selection, testing and         
 
                             |maintenance of equipment used to control exposure,
 
                             |e.g. personal protective equipment, local exhaust 
 
                             |ventilation. Drain down system prior to equipment 
 
                             |break-in or maintenance. Retain drain downs in    
 
                             |sealed storage pending disposal or subsequent     
 
                             |recycle. Always observe good personal hygiene     
 
                             |measures, such as washing hands after handling the
 
                             |material and before eating, drinking, and/or      
 
                             |smoking. Routinely wash work clothing and
protective
                             |equipment to remove contaminants. Discard         
 
                             |contaminated clothing and footwear that cannot be 
 
                             |cleaned. Practice good housekeeping. Due to the   
 
                             |product's semi-solid consistency, generation of   
 
                             |mists and dusts is unlikely to occur.             
 
Personal Protective Equipment|                                                  
 
Materials for Protective     |                                                  
 
Clothing                     |                                                  
 
Hand Protection              |Where hand contact with the product may occur the 
 
                             |use of gloves approved to relevant standards (e.g.
 
                             |Europe: EN374, US: F739) made from the following  
 
                             |materials may provide suitable chemical
protection. 
                             |PVC, neoprene or nitrile rubber gloves Suitability
 
                             |and durability of a glove is dependent on usage,  
 
                             |e.g. frequency and duration of contact, chemical  
 
                             |resistance of glove material, dexterity. Always
seek
                             |advice from glove suppliers. Contaminated gloves  
 
                             |should be replaced. Personal hygiene is a key     
 
                             |element of effective hand care. Gloves must only
be 
                             |worn on clean hands. After using gloves, hands    
 
                             |should be washed and dried thoroughly. Application
 
                             |of a non-perfumed moisturizer is recommended. For 
 
                             |continuous contact we recommend gloves with       
 
                             |breakthrough time of more than 240 minutes with   
 
                             |preference for > 480 minutes where suitable gloves
 
                             |can be identified. For short-term/splash
protection 
                             |we recommend the same, but recognize that suitable
 
                             |gloves offering this level of protection may not
be 
                             |available and in this case a lower breakthrough
time
                             |maybe acceptable so long as appropriate
maintenance 
                             |and replacement regimes are followed. Glove       
 
                             |thickness is not a good predictor of glove        
 
                             |resistance to a chemical as it is dependent on the
 
                             |exact composition of the glove material. Glove    
 
                             |thickness should be typically greater than 0.35 mm
 
                             |depending on the glove make and model.            
 
Eye Protection               |If material is handled such that it could be      
 
                             |splashed into eyes, protective eyewear is         
 
                             |recommended.                                      
 
Skin and Body Protection     |Skin protection is not ordinarily required beyond 
 
                             |standard work clothes. It is good practice to wear
 
                             |chemical resistant gloves.                        
 
Respiratory Protection       |No respiratory protection is ordinarily required  
 
                             |under normal conditions of use.                   
 
                             |In accordance with good industrial hygiene        
 
                             |practices, precautions should be taken to avoid   
 
                             |breathing of material. If engineering controls do 
 
                             |not maintain airborne concentrations to a level   
 
                             |which is adequate to protect worker health, select
 
                             |respiratory protection equipment suitable for the 
 
                             |specific conditions of use and meeting relevant   
 
                             |legislation. Check with respiratory protective    
 
                             |equipment suppliers. Where air-filtering
respirators
                             |are suitable, select an appropriate combination of
 
                             |mask and filter. Select a filter suitable for the 
 
                             |combination of organic gases and vapours [Type    
 
                             |A/Type P boiling point >65�C (149�F)].            
 
Thermal Hazard Protection    |                                                  
 

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                     
 


9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |                                           
 
Appearance                          |Semi-solid at ambient temperature.         
 
Odor                                |Slight hydrocarbon                         
 
Odor Threshold                      |Data not available                         
 
pH                                  |Not applicable                             
 
Relative Evaporation Rate           |Data not available                         
 
(butylacetate=1)                    |                                           
 
Melting Point                       |                                           
 
Freezing Point                      |                                           
 
Boiling Point                       |Data not available                         
 
Flash Point                         |>= 174 �C / >= 345 �F Method: ASTM D92     
 
Auto-ignition Temperature           |> 320 �C / 608 �F                          
 
Decomposition Temperature           |Data not available                         
 
Flammability (solid, gas)           |Data not available                         
 
Vapor Pressure                      | < 0.5 Pa (20 �C / 68 �F)                  
 
                                    |estimated value(s)                         
 
Relative Vapor Density at 20 �C     |> 1estimated value(s)                      
 
Relative Density                    |0.925 (15 �C / 59 �F)                      
 
Specific Gravity                    |                                           
 
Solubility                          |Solubility(ies) Water solubility:
negligible 
                                    |Solubility in other solvents: Data not     
 
                                    |available                                  
 
Partition coefficient:              |Pow: > 6(based on information on similar   
 
n-octanol/water                     |products)                                  
 
Viscosity                           |Viscosity, dynamic : Data not available    
 
                                    |Viscosity, kinematic : 124 mm2/s (40.0 �C /
 
                                    |104.0 �F)                                  
 
                                    |Method: ASTM D445                          
 
Lower Flammable Limit               |Typical 10 %(V)                            
 
Upper Flammable Limit               |Typical 1 %(V)                             
 


9.2.  Other Information
                                                                                
 

SECTION 10: STABILITY AND REACTIVITY                                            
 


10.1      Reactivity
                                                                                
 


10.2      Chemical Stability
Stable.                                                                         
 


10.3      Possibility of Hazardous Reactions
Reacts with strong oxidizing agents.                                            
 


10.4      Conditions to Avoid
Extremes of temperature and direct sunlight.                                    
 


10.5      Incompatible Materials
Strong oxidizing agents.                                                        
 


10.6      Hazardous Decomposition Products
Hazardous decomposition products are not expected to form during normal storage.
 

SECTION 11: TOXICOLOGICAL INFORMATION                                           
 


11.1. Information on Toxicological Effects
Acute Toxicity:                                                                 
 
Acute oral toxicity : LD50 (rat): > 5,000 mg/kg                                 
 
Remarks: Expected to be of low toxicity:                                        
 
Acute inhalation toxicity : Remarks: Not considered to be an inhalation hazard  
 
under normal conditions of use.                                                 
 
Acute dermal toxicity : LD50 (Rabbit): > 5,000 mg/kg                            
 
Remarks: Expected to be of low toxicity:                                        
 
Skin Corrosion/Irritation: Remarks: Expected to be slightly irritating.,
Prolonged
or repeated skin contact without proper cleaning can clog the pores of the skin 
 
resulting in disorders such as oil acne/folliculitis.                           
 
Serious Eye Damage/Irritation: Remarks: Expected to be slightly irritating.     
 
Respiratory or Skin Sensitization: Remarks: Not expected to be a skin
sensitiser. 
Germ Cell Mutagenicity: Remarks: Not considered a mutagenic hazard.             
 
Carcinogenicity: Remarks: Not expected to be carcinogenic.                      
 
Reproductive Toxicity: Remarks: Not expected to impair fertility., Not expected
to
be a developmental toxicant.                                                    
 
Specific Target Organ Toxicity (Single Exposure): Remarks: Not expected to be a 
 
hazard.                                                                         
 
Specific Target Organ Toxicity (Repeated Exposure): Remarks: Not expected to be
a 
hazard.                                                                         
 
Aspiration Hazard: Not considered an aspiration hazard.                         
 
Symptoms/Injuries After Inhalation:                                             
 
Symptoms/Injuries After Skin Contact:                                           
 
Symptoms/Injuries After Eye Contact:                                            
 
Symptoms/Injuries After Ingestion:                                              
 
Chronic Symptoms:                                                               
 

SECTION 12: ECOLOGICAL INFORMATION                                              
 


12.1. Toxicity
Toxicity to fish (Acute toxicity): Remarks: Expected to be harmful: LL/EL/IL50  
 
10-100 mg/l                                                                     
 
Toxicity to daphnia and other aquatic invertebrates (Acute toxicity): Remarks:  
 
Expected to be harmful: LL/EL/IL50 10-100 mg/l                                  
 
Toxicity to algae (Acute toxicity): Remarks: Expected to be harmful: LL/EL/IL50 
 
10-100 mg/l                                                                     
 
Toxicity to fish (Chronic toxicity): Remarks: Data not available                
 
Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) :
Remarks: 
Data not available                                                              
 
Toxicity to bacteria (Acute toxicity) : Remarks: Data not available             
 


12.2. Persistence and Degradability
Biodegradability : Remarks: Expected to be not readily biodegradable. Major     
 
constituents are expected to be inherently biodegradable, but contains
components 
that may persist in the environment.                                            
 


12.3. Bioaccumulative Potential
Bioaccumulation : Remarks: Contains components with the potential to            
 
bioaccumulate.                                                                  
 


12.4. Mobility in Soil
Mobility : Remarks: Semi-solid under most environmental conditions. If it enters
 
soil, it will adsorb to soil particles and will not be Mobile.                  
 
Remarks: Floats on water.                                                       
 


12.5. Other Adverse Effects
no data available                                                               
 

SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Waste Disposal Recommendations: Recover or recycle if possible. It is the       
 
responsibility of the waste generator to determine the                          
 
toxicity and physical properties of the material generated to determine the
proper
waste classification and disposal methods in compliance with applicable         
 
regulations. Do not dispose into the environment, in drains or in water courses 
 
Additional Information: Contaminated packaging : Dispose in accordance with     
 
prevailing regulations, preferably to a recognized collector or contractor. The 
 
competence of the collector or contractor should be established beforehand.     
 
Disposal should be in accordance with applicable regional, national, and local  
 
laws and regulations.                                                           
 
Local legislation Remarks : Disposal should be in accordance with applicable    
 
regional, national, and local laws and regulations.                             
 

SECTION 14: TRANSPORT INFORMATION                                               
 


14.1 In Accordance with DOT
Proper Shipping Name |Not regulated as a dangerous good                         
 
Hazard Class         |                       |<PICTOGRAM PHRASE>                
 
Identification Number|                       |                                  
 
Label Codes          |                       |                                  
 
ERG Number           |                                                          
 


14.2 In Accordance with IMDG
Proper Shipping Name |Not regulated as a dangerous good                         
 
Hazard Class         |                                                          
 
Identification Number|                                                          
 
Label Codes          |                      |<PICTOGRAM PHRASE>                 
 
ntification Of The   |                      |                                   
 
Substance/m          |                      |                                   
 
EmS-No. (Fire)       |                      |                                   
 
EmS-No. (Spillage)   |                      |                                   
 


14.3 In Accordance with IATA
Proper Shipping Name |Not regulated as a dangerous good                         
 
Identification Number|                       |<PICTOGRAM PHRASE>                
  
Hazard Class         |                       |                                  
  
Label Codes          |                       |                                  
  
ntification Of The   |                       |                                  
  
Substance/m          |                       |                                  
  
ERG Code (IATA)      |                                                          
 

SECTION 15: REGULATORY INFORMATION                                              
 

15.1      US Federal Regulations
This material does not contain any components with a CERCLA RQ., Shell
classifies 
this material as an "oil" under the CERCLA Petroleum Exclusion, therefore
releases
to the environment are not reportable under CERCLA. SARA 313 : This material
does 
not contain any chemical components with known CAS numbers that exceed the      
 
threshold (De Minimis) reporting levels established by SARA Title III, Section  
 
313.                                                                            
 
SARA Section 311/312 Hazard Classes |No SARA Hazards                            
 
Toxic Substances Control Act (TSCA) |All components listed.                     
 

15.2      US State Regulations
California Prop 65: This product does not contain any chemicals known to State
of 
California to cause cancer, birth defects, or any other reproductive harm.      
 
                                                                                
 

SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION   
 

Revision date   |05/22/2015                                                     
 
Other           |This document has been prepared in accordance with the SDS     
 
Information     |requirements of the OSHA Hazard Communication Standard 29 CFR  
 
                |1910.1200.                                                     
 
GHS Full Text Phrases:                                                          
 
----|                               |                                           
 
--  |                               |                                           
 
----|                               |                                           
 
--  |                               |                                           
 
----|                               |                                           
 
--  |                               |                                           
 
----|                               |                                           
 
--  |                               |                                           
 
----|                               |                                           
 
--  |                               |                                           
 


Grainger disclaimer: This information is based on our current knowledge and
is intended to describe the product for the purposes of health, safety and
environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product.

    

The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.

Feedback