Product Categories See All
Track Order Status
Sheet 0076820Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: 3/26/2015 |Revision Number: Imperial Supplies Part Number: 0076820 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Imperial Supplies Imperial School Bus Yellow Silicone 8oz can CAS No: Synonyms: 7682YW10 1.2. Intended Use of the Product Use of the substance/mixture: Refer to Technical Data 1.3. Name, Address, and Telephone of the Responsible Party Company Dynatex Inc. 350 Ring Road Elizabethtown, KY, 42701 USA Phone: (270) 769-3385 1.4. Emergency Telephone Number Emergency | (800) 424-9300 Chemtrec number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) EYE |Category 2B DAMAGE/IRRITAT| ION | SKIN |Category 2 CORROSION/IRRI| TATION | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Exclamat| | | | | |ion Mark| | | | | Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |Causes eye irritation |Causes skin irritation Precautionary Statements |Response: If eye irritation persists: Get medical (GHS-US) |advice/attention. |If in eyes: Rinse cautiously with water for several |minutes. |Remove contact lenses, if present and easy to do. |Continue rinsing. |If on skin: Wash with plenty of soap and water. |If skin irritation occurs: Get medical |advice/attention. |Read label before use. |Take off contaminated clothing and wash it before |reuse. |Prevention: Wash hands thoroughly after handling. |Wear protective gloves. |Storage: N/A |Disposal: N/A 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None known 2.4. Unknown Acute Toxicity (GHS-US) Ingredients of unknown toxicity: 0% SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Methyltriacetoxysilane |4253-34-3 |1% - 5% | Ethyltriacetoxysilane |17689-77-9 |1% - 5% | Difluoroethane (propellant) |75-37-6 |1% - 5% | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove to fresh air. No first aid should be needed. First-aid Measures After Skin Contact: To clean from skin, remove completely with a dry cloth or paper towel before washing with detergent and water. Get medical attention if irritation develops. First-aid Measures After Eye Contact: Immediately flush with water for 15 minutes. Seek medical attention. First-aid Measures After Ingestion: No first aid should be needed. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: N/A Unsuitable Extinguishing Media: N/A 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: None known Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: Self-contained breathing apparatus and protective clothing should be worn when fighting large fires involving chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Steps to be taken in case of spill or release: Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking surfaces with detergent and water to reduce slipping hazard. Wear protective equipment as specified in Section 8. Disposal should be in accordance with local, state and federal regulations. Methods for Cleaning Up: 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Avoid eye contact. Avoid skin contact. Avoid breathing vapor. Keep container closed. Do not take internally. Use reasonable care. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep container closed and store in a cool, well ventilated area, away from water or moisture. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Occupational Exposure Limits Ingredient Name ACGIH TLV OSHA PEL STEL Methyltriacetoxysilane TWA 10ppm TWA 10ppm 15ppm Ethyltriacetoxysilane TWA 10ppm TWA 10ppm 15ppm Difluoroethane (propellant) N/A N/A N/A 8.2. Exposure Controls Appropriate Engineering |Acetic acid is formed upon contact with water or Controls |humid air. Provide adequate ventilation to control |exposures within guidelines of OSHA PEL: TWA 10 ppm |and ACGIH TLV: TWA 10 ppm, STEL 15 ppm. Personal Protective Equipment|Goggles, Gloves Materials for Protective | Clothing | Hand Protection | Eye Protection |Safety goggles or glasses with side shields are |recommended. Skin and Body Protection |Wash at mealtimes and end of shift. Contaminated |clothing and shoes should be removed as soon as |practical and throughly cleaned before reuse. |Chemical protective gloves are recommended. Suitable |Gloves: Silver Shield� 4H�. Respiratory Protection |No respiratory protection should be needed with good |local ventilation. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Paste Appearance | Odor |Acetic acid odor Odor Threshold |N/A pH |Not applicable Relative Evaporation Rate |N/A (butylacetate=1) | Melting Point |Not determined Freezing Point | Boiling Point |Not applicable Flash Point |>100C >212F Closed Cup Auto-ignition Temperature |N/A Decomposition Temperature |N/A Flammability (solid, gas) |N/A Vapor Pressure |Not applicable Relative Vapor Density at 20 �C |Not applicable Relative Density |N/A Specific Gravity |1.007 Solubility |Not determined Partition coefficient: |N/A n-octanol/water | Viscosity |Not applicable Lower Flammable Limit |N/A Upper Flammable Limit |N/A 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable 10.3 Possibility of Hazardous Reactions 10.4 Conditions to Avoid Exposure to air or moisture until ready to use. 10.5 Incompatible Materials Oxidizing material can cause a reaction. Water, moisture or humid air can cause hazardous vapors to form as described in Section 8. 10.6 Hazardous Decomposition Products SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects: No Data Available Acute Toxicity: No Data Available Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects Environmental Effects: Complete information is not yet available. Environmental Fate and Distribution: Complete information is not yet available. Fate and Effects in Waste Water Treatment Plants: Complete information is not yet available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: We make no guarantee or warranty of any kind that the use or disposal of this product complies with all local, state, or federal laws. It is also the obligation of each user of the product mentioned herein to determine and comply with the requirements of all applicable statutes. This product is not known to be regulated under RCRA regulations. Disposal of unused portions of this product and process waste containing this product should be done only after a careful evaluation and in compliance with all federal, local and state laws. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |N/A Hazard Class |N/A |<PICTOGRAM PHRASE> Identification Number|N/A | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number|Not subject to IMDG code. Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not subject to IATA regulations. Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |All chemical substances found in this product |comply with the Toxic Substances Control Act |inventory reporting requirements. 15.2 US State Regulations <COMPONENT> California Proposition 65: This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause cancer, birth defects or other reproductive harm: None known SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |3/26/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer: The data contained herein is based upon information that Accumetric LLC believes to be reliable. Users of this product have the responsibility to determine that suitability of use and to adopt all necessary precautions to ensure the safety and protection of property and persons involved in said use. All statements or suggestions are made without warranty, expressed or implied, regarding the accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.