Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status
Order No:
Zip Code:

MSDS Sheet 0075780

Printer Friendly View
        

MSDS DOCUMENT                 Print Rev. Date 06/22/2006

Product Dynatex ® 49402 Quik Weld Compound Part A  (resin)

   1. Chemical Product and Company Identification


   Trade Name of this Product Dynatex®  49402 Quik Weld Compound Part A (resin)
   Synonyms:      2596449402, Part A, Resin


   MSDS ID DYN49402a
   Manufacturer                               Phone Number
   Dynatex Inc.                               (270) 769-3385
   350 Ring Road                              Emergency Phone
   Elizabethtown, KY 42701                    CHEMTREC (800) 424-9300
                                              Revision Date    6/22/2006


   Health:        2
   Fire:          1
   Reactivity:    1
   Specific:


   2. Composition and Information on Ingredients


   Ingredient          CAS Number      Weight %     ACGIH TLV   PEL      STEL
   Calcium carbonate   1317-65-3       40%-50%      10 mg/m3    5 mg/m3


   Bisphenol A/        25068-38-6      30%-40%
   Epichlorohydrin Resin


   Iron Powder         65997-19-5      10%-20%      10 mg/m     15 mppcf


   Fumed Silica        64742-94-5      1%-5%        N/E         N/E


   3. Hazard Identification


   Primary Routes of Entry
   Eye contact, inhalation, skin contact


   Eye Contact
   Contact with eyes can cause irritation, redness, tearing, blurred vision,
   and/or swelling.


   SKIN Contact
   Contact with skin cause irritation (minor itching, burning and/or redness) 
   or dermatitis.
   Product may be readily absorbed through the skin, causing defatting.


   Inhalation
   Inhalation of vapors can cause nasal and respiratory irritation, dizziness,
   weakness, fatigue, nausea, headache, possible unconsciousness and/or   
   asphyxiation. Aspiration of material into lungs may result in chemical   
   pneumonitis which can be fatal.


   Ingestion
   Ingestion can cause gastrointestinal irritation, nausea, vomiting, diarrhea.


   4. First Aid Information


   Eye Contact
   Flush eyes gently with water for at least 15 minutes, lifting eyelids
   occasionally: get prompt medical attention.


   Skin Contact
   Thoroughly wash exposed skin with soap and water.


   Inhalation
   If inhaled, remove victim from exposure to a well-ventilated area.
   Make them comfortably warm, but not hot. Use oxygen or artificial respiration
   as required. Get medical attention.


   Ingestion
   Give water to dilute. Do not induce vomiting. Keep individual calm and seek
   medical attention.


   5. Fire Fighting Measures


   Flash Point         >200F / 93C
   FP Method           Seta Closed Cup


   Flammability Limits in Air
   Not determined


   Extinguishing Media
   Carbon Dioxide, Dry Chemical, Foam


   Special Fire Fighting Procedures
   Fight like a fuel oil fire.  Cool fire exposed containers with water spray.
   Fire fighter should wear OSHA/NIOSH approved self-contained breathing
   apparatus.


   Unusual Fire or Explosion Hazards
   Closed containers exposed to high temperatures, such as fire conditions, may
   rupture.


   Hazardous Decomposition Products
   Thermal breakdown of this product during fire or very high heat conditions
   may evolve the following hazardous decomposition products:
   Carbon Dioxide
   Carbon Monoxide
   Carbon


   6. Accidental Release Measures


   Steps to be taken in case of spill or release
   Observe all personal protection equipment recommendations.
   Ventilate area. Remove all possible sources of ignition. Avoid prolonged
   breathing of vapor. Contain spill with inert absorbent. Local, state and   
   federal regulations may apply to releases and disposal of this material, as  
 well as those materials and items employed in cleanup of releases.


   7. Handling and Storage

   Handling
   Use adequate ventilation. Avoid contact with eyes and skin. Avoid breathing
   vapors. Do not flame, cut, braze, weld or melt empty containers.


   Storage
   Do not store product above 100 degrees F/38 degrees C. Keep the product away
   from heat, open flames, and other sources of ignition. Avoid contact with   
   strong acids, alkalis and oxidizers.


   8. Exposure Controls and Personal Protection


   Eye Protection
   Safety goggles or glasses with side shields are recommended.


   Skin Protection
   Rubber gloves should be worn where skin contact is likely. Wear impervious
   clothing and shoes.


   Ventilation
   Use adequate ventilation in volume and pattern to keep TLV/PEL below
   recommended levels.  Explosion-proof ventilation may be necessary.


   Respiratory Protection
   If component TLV limits are exceeded, use NIOSH/MSHA approved respirator to
   remove vapors. Use an air-supplied respirator if necessary. With general
   ventilation, does not require a respirator.


   9. Physical and Chemical Properties


   Physical State        Smooth paste
   Specific Gravity      1.8
   Density lbs/gal.      15.0217277
   Color/Appearance      Dark gray or black
   Boiling/Cond. Point   Not established
   Solubility            Not soluble in water
   Evaporation Rate      Slower than Ethyl Ether
   VOC %                 Nil
   Vapor Density         Heavier than air
   Vapor Pressure        Not available


   Note
   The above information is not intended for use in preparing product
   specifications.
   Contact Accumetric LLC before writing specifications.


  10. Stability and Reactivity


   Chemical Stability
   Stable


   Conditions to Avoid
   Open flames, heat


   Materials to Avoid / Incompatibility
   Alkaline materials, strong acids, oxidizing agents


   Hazardous Polymerization
   Will not occur


  11. Toxicological Information


   Special Hazard Information
   Overexposure to this material has apparently been known to cause the
   following effects in lab animals:
   Skin sensitization
   Respiratory system irritation


   Component Toxicology Information
   No known applicable information.


   Carcinogenicity
   This product is not known to be a carcinogen.


   Mutagenicity
   This product is not known to be a mutagen.


   Teratogenicity
   This product is not known to be a teratogen.


  12. Ecological Information


   Environmental Fate and Distribution
   Complete information is not yet available.


   Environmental Effects
   Complete information is not yet available.


   Fate and Effects in Waste Water Treatment Plants
   Complete information is not yet available .


  13. Disposal Considerations


   Waste Disposal Method
   We make no guarantee or warranty of any kind that the use or disposal of this
   product complies with all local, state, or federal laws. It is also the
   obligation of each user of the product mentioned herein to determine and   
   comply with the requirements of all applicable  statutes.


   This product is not known to be regulated under RCRA regulations. Disposal of
   unused portions of this product and process waste containing this product   
   should be done only after a careful evaluation and in compliance with all   
   federal, local and  state laws.


  14. Transportation Information


   Shipping Information
   Please comply with DOT regulations in the United States.


  15.  Regulatory Information


   The contents of this MSDS comply with the OSHA Hazard Communication Standard
   29 CFR 1910.1200


   TSCA Status
   All chemical substances in this material are included on or exempted from
   listing on the  TSCA Inventory of Chemical Substances.


   SARA Title III Section 302 Extremely Hazardous Substances
   None


   SARA Title III Section 304 CERCLA Hazardous Substances
   None


   SARA Title III Section 312 Hazard Class
   Acute: Yes
   Chronic: No
   Fire: No
   Pressure: No
   Reactive: No


   SARA Title III Section 313 Toxic Chemicals
   None present or none present in regulated quantities.


   California Proposition 65
   This product contains the following chemical(s) listed by the State of
   California under the Safe Drinking Water and Toxic Enforcement Act of 1986   
   (Proposition 65) as being known to cause cancer, birth defects or other   
   reproductive harm:
   Trace amounts of Epichlorohydrin (106-89-8), a chemical known to the State of
   California to cause cancer, are present in this product. However, given the
   low level and application of this product, typical uses do not constitute a  
   significant risk under the standard.


   Pennsylvania
   Limestone (1317-65-3)


  16.  Other Information


   Disclaimer
   The data contained herein is based upon information that Accumetric LLC
   believes to be reliable.  Users of this product have the responsibility to
   determine that suitability of use and to adopt all necessary precautions to  
   ensure the safety and protection of property and persons involved in said   
   use. All statements to suggestions are made without warranty, expressed or   
   implied, regarding the accuracy of the information, the hazards connected   
   with the use of the material or the results to be obtained
   from the use thereof.


   MSDS DOCUMENT              Print Rev. Date 08/03/2006


   Product Dynatex® 49402 Quik Weld Compound Part B (hardener)


   1. Chemical Product and Company Identification


   Trade Name of this Product Dynatex® 49402 Quik Weld Compound Part B
   (hardener)
   Synonyms:      2596449402, Part B, Hardener


   MSDS ID DYN49402b
   Manufacturer                       Phone Number
   Dynatex Inc.                       (270) 769-3385
   350 Ring Road                      Emergency Phone
   Elizabethtown, KY 42701            CHEMTREC (800) 424-9300
                                      Revision Date    12/20/2004


   Health:        3
   Fire:          1
   Reactivity:    1
   Specific


   2. Composition and Information on Ingredients


   Ingredient              CAS Number    Weight %    ACGIH TLV     PEL     STEL
   Barium Sulfate          7727-43-7     35%-45%     10 mg/m3     5 mg/m3


   Mercaptan terminated    Trade Secret  20%-30%
   Polymer


   Magnesium silicate      14807-96-6    15% - 25%


   Calcium Carbonate       471-34-1      5% -10%     10 mg/m3     5 mg/m3


   Calcium carbonate       1317-65-3     5% - 10%    10 mg/m3     5 mg/m3


   Amorphous fumed        112945-52-5    1% - 5%     10 mg/m      6 mg/m
   Silica


   2,4,6-Tri(dimethylamino   90-72-2     1% - 5%
   Methyl) phenol


   Nonyl Phenol (Mixed    25154-52-3     1% - 5%     Not Establish
   Isomers)


   3. Hazard Identification


   Primary Routes of Entry
   Inhalation,  skin contact


   Eye Contact
   Contact with eyes can cause irritation, redness, tearing, blurred vision,
   and/or swelling. May cause permanent eye damage including blindness.


   Skin Contact
   Contact with skin can cause irritation (minor itching, burning and/or
   redness) or dermatitis. Product may be readily absorbed through the skin,   
causing defatting.


   Inhalation
   Inhalation of vapors can cause nasal and respiratory irritation, dizziness,
   weakness, fatigue, nausea, headache, possible unconsciousness and/or   
asphyxiation. Aspiration of material into lungs may result in chemical   
pneumonitis which can be fatal.


   Ingestion
   Ingestion can cause gastrointestinal irritation, nausea, vomiting, diarrhea.


   4. First Aid Information


   Eye Contact
   Immediately flush with water for 15 minutes. Seek medical attention.


   Skin Contact
   Thoroughly wash exposed skin with soap and water.


   Inhalation
   Inhaled, remove victim from exposure to a well-ventilated area. Make
   them comfortably warm, but not hot. Use oxygen or artificial respiration as  
 required. Get medical attention.

   Ingestion
   Give water to dilute. Do not induce vomiting. Keep individual calm and
   seek medical attention.

   5. Fire Fighting Measures
   Flash Point         >200F / 93C
   FP Method           Seta Closed Cup


   Flammability Limits in Air
   Not determined


   Extinguishing Media
   Carbon Dioxide, Dry Chemical, Foam


   Special Fire Fighting Procedures
   Fight like a fuel oil fire. Cool fire exposed containers with water spray.
   Fire fighter should wear OSHA/NIOSH approved self-contained breathing
   apparatus.


   Unusual Fire or Explosion Hazards
   Closed containers exposed to high temperatures, such as fire conditions, may
   rupture.


   Hazardous Decomposition Products
   Thermal breakdown of this product during fire or very high heat conditions
   may evolve the following hazardous decomposition products:
   Carbon Dioxide
   Carbon Monoxide
   Carbon


   6. ACCIDENTAL RELEASE MEASURES
   Steps to be taken in case of spill or release
   Observe all personal protection equipment recommendations. Ventilate area.
   Remove all possible sources of ignition. Avoid prolonged breathing of vapor.
   Contain spill with inert absorbent. Local, state and federal regulations may
   apply to releases and disposal of this material, as well as those materials  
 and items employed in cleanup of releases.


   7. HANDLING AND STORAGE
   Handling
   Use adequate ventilation. Avoid contact with eyes and skin. Avoid breathing
   vapors.
   Do not flame, cut, braze, weld or melt empty containers.


   Storage
   Do not store product above 100 degrees F/38 degrees C. Keep the product away
   from heat, open flames, and other sources of ignition.  Avoid contact with   
strong acids, alkalis and oxidizers.


   8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
   Eye Protection
   Safety goggles or glasses with side shields are recommended.


   Skin Protection
   Rubber gloves should be worn where skin contact is likely.
   Wear impervious clothing and shoes.


   Ventilation
   Use adequate ventilation in volume and pattern to keep TLV/PEL  below
   recommended levels.
   Explosion-proof ventilation may be necessary.


   Respiratory Protection
   If component TLV limits are exceeded, use NIOSH/MSHA approved respirator to
   remove vapors. Use an air-supplied respirator if necessary. With general
   ventilation, does not require a respirator.


   9. PHYSICAL AND CHEMICAL PROPERTIES
   Physical State        Paste
   Specific Gravity      1.87
   Density lbs/Gal.      15.605906
   Color/Appearance      White
   Boiling/Cond. Point   Not established
   Solubility            Not soluble in water
   Evaporation Rate      Slower than ethyl ether
   Percent Volatile      Nil
   Vapor Density         Heavier than air
   Vapor Pressure        Not available


   Note
   The above information is not intended for use in preparing product
   specifications.
   Contact Accumetric LLC before writing specifications.


  10. STABILITY AND REACTIVITY
   Chemical Stability
   Stable


   Conditions to Avoid
   Open flames, heat


   Materials to Avoid/Incompatibility
   Alkaline materials, strong acids, oxidizing agents


   Hazardous Polymerization
   Will not occur


  11. TOXICOLOGICAL INFORMATION
   Special Hazards Information
   Overexposure to this material has apparently been known to cause the
   following effects in lab animals:
   Eye damage
   Skin damage with prolonged contact
   Blindness


   Mutagenicity
   This product is not known to be a mutagen.


   Teratogenicity
   This product is not known to be a teratogen.


   Carcinogenicity
   This product is not known to be a carcinogen.


   Component Toxicology Information
   No known applicable information.


  12. ECOLOGICAL INFORMATION
   Environmental Fate and Distribution
   Complete information is not yet available.


   Environmental Effects
   Complete information is not yet available.


   Fate and Effects in Waste Water Treatment Plants
   Complete information is not yet available.


  13. DISPOSAL CONSIDERATIONS
   Waste Disposal Method
   We make no guarantee or warranty of any kind that the use or disposal of this
   complies with all local, state, or federal laws. It is also the obligation of
   each user of the product mentioned herein to determine and comply with the   
requirements of all applicable statues.


   The product is not known to be regulated under RCRA  regulations.
   Disposal of unused portions of this product and process waste containing this
   product should be done only after a careful evaluation and in compliance with
   all federal, local and state laws.


  14. TRANSPORTATION INFORMATION
   Shipping Information
   Please comply with DOT regulations in the United States.


   Marine Pollutant
   This product contains ten percent or more of a marine pollutant.
   Ship accordingly.


   15. REGULATORY INFORMATION
   The contents of this MSDS comply with the OSHA Hazard Communication Standard
   29 CFR 1910.1200.


   TSCA Satus
   All chemical substances in this material are included on or exempted from
   listing on the TSCA Inventory of Chemical Substances.


   SARA Title III Section 302 Extremely Hazardous Substances
   None


   SARA Title III Section 304 CERCLA Hazardous Substances.
   None


   SARA Title III Section 312 Hazard Class.
   Acute: Yes
   Chronic: No
   Fire: No
   Pressure: No
   Reactive: No


   SARA Title III Section 313 Toxic Chemicals
   None present or none present in regulated quantities.


   California Proposition 65
   This product contains the following chemical(s) listed by the State of
   California under The Safe Drinking Water and Toxic Enforcement Act of 1986   
(Proposition 65) as being known to cause cancer, birth defects or other   
reproductive harm: Trace amounts of some chemicals known to the State of   
California to cause cancer, birth defects or other reproductive harm may be   
present in this product.


   New Jersey
   Non-fibrous talc (14807-96-6)


   Pennsylvania
   Alkyl Phenol (25154-52-3)
   Barium Sulfate (7727-43-7)
   Limestone (1317-65-3)
   Non-fibrous talc (14807-96-6)


  16. OTHER INFORMATION
   Disclaimer
   The data contained herein is based upon information that Accumetric LLC
   believes to be reliable. Users of this product have the responsibility to   
determine that suitability of use and to adopt all necessary precautions to   
ensure the safety and protection of property and persons involved in said   
use. All statements to suggestions are made without warranty, expressed or   
implied, regarding the accuracy of the information, the hazards connected   
with the use of the material or the results to be
   obtained from the use thereof.
    

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.

Feedback