Product Categories See All
Track Order Status
SDS Sheet 0075680Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: 2/12/2015 |Revision Number: Imperial Supplies Part Number: 0075680 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: DynatexÂ¨ 49582 Copper Anti-Seize & Lubricating Compound CAS No: Synonyms: 49582CP10 1.2. Intended Use of the Product Use of the substance/mixture: Refer to Technical Data 1.3. Name, Address, and Telephone of the Responsible Party Company Dynatex Inc. 350 Ring Road Elizabethtown, KY, 42701 USA Phone: (270) 769-3385 1.4. Emergency Telephone Number Emergency | (800) 424-9300 Chemtrec number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) HAZARDOUS TO | Category 1 THE AQUATIC | ENVIROMENT - | ACUTE HAZARD | HAZARDOUS TO |Category 2 THE AQUATIC | ENVIROMENT - | LONG-TERM | HAZARD | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Environm| | | | | |ent | | | | | Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |Toxic to aquatic life with long lasting effects. |Very toxic to aquatic life. Precautionary Statements |Response: (GHS-US) |Collect spillage. | |Prevention: |Avoid release to the environment. | |Storage: |N/A. | |Disposal: |Dispose of contents and container in accordance with |all local, regional, national, and international |regulations. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None known. 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Copper powder |7440-50-8 |1% - 5% | | | | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove to fresh air. If symptoms persist, obtain appropriate medical attention. First-aid Measures After Skin Contact: Wash with soap and water. If irritation occurs, seek medical attention. First-aid Measures After Eye Contact: Immediately flush eyes with water for at least 15 minutes. Get medical attention if irritation develops. First-aid Measures After Ingestion: Do not induce vomiting. Keep warm. Get medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: N/A Unsuitable Extinguishing Media: N/A 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: None known. Explosion Hazard: None known. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Fight like a fuel oil fire. Cool fire exposed containers with water spray. Use water to keep fire exposed containers cool to prevent pressure build-up. Fire fighter should wear OSHA/NIOSH approved self-contained breathing apparatus. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Stop flow, scrape, wipe, mop up or absorb with diatomaceous earth or other inert material. Disposal should be in accordance with local, state, and federal regulations. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Spills may cause slippery floors. Proper footwear required. Remove contaminated clothing and launder before reuse. Wash hands with soap and water before eating, drinking or smoking. Discard contaminated leather gloves and shoes. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Avoid storage near open flame or other sources of ignition. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Ingredient Name ACGIH TLV OSHA PEL STEL Copper powder 1 mg/mÃ… 1 mg/mÃ… N/A 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment|N/A. Materials for Protective |Other Protective Clothing or Equipment: None under Clothing |normal use; however, use of solvent resistant aprons |or other clothing is recommended. Use of chemically |resistant boots is recommended. Hand Protection | Eye Protection |Safety goggles or glasses with side shields are |recommended. Skin and Body Protection |Skin Protection: Use neoprene or nitrile rubber |gloves to prevent skin contact. Respiratory Protection |No special requirements under ordinary conditions of |use and with adequate ventilation. Thermal Hazard Protection |Have emergency shower and eye wash available. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Paste Appearance | Odor |Petroleum odor Odor Threshold |Not available pH |Not available Relative Evaporation Rate |Not available (butylacetate=1) | Melting Point |Not available Freezing Point | Boiling Point |Not available Flash Point |215.5C 420F Auto-ignition Temperature |Not available Decomposition Temperature |Not available Flammability (solid, gas) |Not available Vapor Pressure |Not available Relative Vapor Density at 20 Â°C |Not available Relative Density | Specific Gravity |1.27 Solubility |Insoluble in water Partition coefficient: |Not available n-octanol/water | Viscosity |Not available Lower Flammable Limit |N/A Upper Flammable Limit |N/A 9.2. Other Information Note: The above information is not intended for use in preparing product specifications. Contact Accumetric LLC before writing specifications. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable 10.3 Possibility of Hazardous Reactions 10.4 Conditions to Avoid Do not heat above flash point. Do not weld. 10.5 Incompatible Materials Keep away from strong oxidizing agents. 10.6 Hazardous Decomposition Products SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: This product is not known to be a sensitizer. Germ Cell Mutagenicity: This product is not known to be a mutagen. Carcinogenicity: This product is not known to be a carcinogen. Reproductive Toxicity: This product is not known to be a reproductive toxin. Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects Complete information is not yet available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: We make no guarantee or warranty of any kind that the use or disposal of this product complies with all local, state, or federal laws. It is also the obligation of each user of the product mentioned herein to determine and comply with the requirements of all applicable statutes. This product is not known to be regulated under RCRA regulations, but contains SARA regulated substances. Disposal of unused portions of this product and process waste containing this product should be done only after a careful evaluation and in compliance with all federal, local and state laws. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |N/A Hazard Class |N/A |<PICTOGRAM PHRASE> Identification Number|N/A | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |All chemical substances found in this product |comply with the |Toxic Substances Control Act inventory |reporting requirements. 15.2 US State Regulations California Proposition 65: This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause cancer, birth defects or other reproductive harm: None known. New Jersey: Copper powder 7440-50-8 Pennsylvania: Graphite Powder (7782-42-5) Copper Powder (7440-50-8) SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |2/12/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.