Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status

Sheet 0075570

Printer Friendly View
                                         MATERIAL SAFETY DATA SHEET
7556   7557   7558   7565

2005

SECTION 1-- PRODUCT AND COMPANY IDENTIFICATION

--------------------------------------------------------------------------------
PRODUCT IDENTIFICATION                             HMIS CODES
                                                   Health            1*
Acetoxy                                            Flammability    1
7556 Clear    7558 Black                           Reactivity      0
7557 Red      7565 White

MANUFACTURER'S NAME                           EMERGENCY TELEPHONE NO.
       Mfg. for;  IMPERIAL SUPPLIES LLC       (216)  566-2917
       P.O. Box  11008
       Green Bay, WI  54307-1008                   DATE OF PREPARATION
INFORMATION TELEPHONE NO.                          8-SEP-05                
    (800) 558-2808

SECTION 2 --  COMPOSITION/INFORMATION ON INGREDIENTS

--------------------------------------------------------------------------------
% by WT     CAS No.      INGREDIENT   UNITS                     VAPOR PRESSURE
2           74-98-6      Propane        
                                      ACGIH TLV      2500 ppm   760 mm
                                      OSHA   PEL     1000 ppm
2           106-97-8     Butane
                                      ACGIH TLV      800 ppm    760 mm
                                      OSHA  PEL      800 ppm
2           17689-77-9   Ethyl Triacetoxysilane
                                      ACGIH TLV      Not Available
                                      OSHA   PEL     Not Available
2           4253-34-3    Methyl Triacetoxysilane
                                      ACGIH TLV      Not Available
                                      OSHA  PEL      Not Available
8-10        7631-86-9    Amorphous Silica
                                      ACGIH TLV      10 mg/m3 as Dust
                                      OSHA  PEL      6 mg/m3  as Dust
2           13463-67-7   Titanium Dioxide
                  (in White only)       ACGIH TLV    10 mg/m3 as Dust
                                        OSHA PEL     10 mg/m3 Total Dust
                                        OSHA PEL     5 mg/m3 Respirable Fraction
0.6         1333-86-4    Carbon Black
                  (in Black only)       ACGIH TLV    3.5 mg/m3
                                        OSHA  PEL    3.5 mg/m3

NOTE: These products may evolve small quantities of Acetic Acid during curing.
    Exposure limits for Acetic Acid are;

    <1    64-19-7    Acetic Acid
                           ACGIH TLV    10 ppm
                           ACGIH TLV    15 ppm   STEL
                           OSHA  PEL    10 ppm

SECTION 3 --  HAZARDS IDENTIFICATION

--------------------------------------------------------------------------------
ROUTES OF EXPOSURE
    INHALATION of vapor or spray mist.
    EYE or SKIN contact with the product or vapor. 
EFFECTS OF OVEREXPOSURE
    EYES; Irritation.
    SKIN:    Prolonged or repeated exposure may cause irritation.
INHALATION; Irritation of the upper respiratory system. 
SIGNS AND SYMPTOMS OF OVEREXPOSURE
    Headache, dizziness, nausea, and loss of coordination are indications of 
excessive exposure to vapors or spray mists. 
    Redness and itching or burning sensation may indicate eye or excessive skin 
exposure. 
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
    None known.
CANCER INFORMATION
    For complete discussion of toxicology data refer to Section 11.

SECTION 4 --  FIRST AID MEASURES

--------------------------------------------------------------------------------
EYES;    Flush eyes with large amounts of water for 15 minutes. 
        Get medical attention.
SKIN: Wash affected area thoroughly with soap and water.
        If irritation persists or occurs later, get medical attention.
        Remove contaminated clothing and launder before re-use. 
INHALATION; If affected, remove from exposure. Restore breathing. 
        Keep warm and quiet. 
INGESTION;  Do not induce vomiting. Get medical attention immediately. 

SECTION 5 --  FIRE FIGHTING MEASURES

--------------------------------------------------------------------------------
FLASH POINT                      LEL            UEL
     >200 F for RTV              N. Ap.        N. Ap.
    -20   F for Propellant
EXTINGUISHING MEDIA
    Carbon Dioxide, Dry Chemical, Foam
UNUSUAL FIRE AND EXPLOSION HAZARDS
    Containers may explode when exposed to extreme heat. 
    Application to hot surfaces requires special precautions. 
    During emergency conditions overexposure to decomposition products may cause 
a 
health hazard. Symptoms may not be immediately apparent. Obtain medical 
attention.
SPECIAL FIRE FIGHTING PROCEDURES
    Full protective equipment including self-contained breathing apparatus 
should 
be used. 
    Water spray may be ineffective. If water is used, fog nozzles are 
preferable. 
Water may be used to cool closed containers to prevent pressure build-up and 
possible auto ignition or explosion when exposed to extreme heat. 

SECTION 6 - ACCIDENT RELEASE MEASURE

--------------------------------------------------------------------------------
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
    Remove with inert absorbent.

SECTION 7 --  HANDLING AND STORAGE

--------------------------------------------------------------------------------
STORAGE CATEGORY
    Not Available
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
    Keep away from heat, sparks, and open flame.
    During use and until all vapors are gone; Keep area ventilated - Do not 
smoke 
- Extinguish all flames, pilot lights, and heaters - Turn off stoves, electric 
tools and appliances, and any other sources of ignition. 
    Consult NFPA Code. Use approved Bonding and Grounding procedures. 
    Contents under pressure. Do not puncture, incinerate, or expose to 
temperature 
above 120 F. Heat from sunlight, radiators, stoves, hot water, and other heat 
sources could cause container to burst. Do not take internally. Keep out of the 
reach of children.

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION

--------------------------------------------------------------------------------
PRECAUTIONS TO BE TAKEN IN USE
    Use only with adequate ventilation.
    Avoid contact with skin and eyes. Avoid breathing vapor and spray mist. 
    Wash hands after using. 
    These products may contain materials classified as nuisance particulates
(listed "as Dust" in Section 2) which may be present at hazardous levels only 
during sanding or abrading of the dried film. If no specific dusts are listed in 
Section 2, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 
(total dust), 3 mg/m3 (respirable fraction), OSHA PEL 15 mg/m3 (total dust), 5 
mg/m3 (respirable fraction).
VENTILATION
    Local exhaust preferable. General exhaust acceptable if the exposure to 
materials in Section 2 is maintained below applicable exposure limits. 
Refer to OSHA Standards 1910.94, 1910.107, 1910.108.
RESPIRATORY PROTECTION
    None required for typical use in well-ventilated area. If personal exposure 
cannot be controlled below applicable limits by ventilation, or if irritation 
occurs, wear a properly fitted organic vapor/particulate respirator approved by 
NIOSH/MSHA for protection against materials in Section 2.
    When sanding or abrading the dried film, wear a dust/mist respirator 
approved 
by NIOSH/MSHA for dust which may be generated from this product, underlying 
coating, or the abrasive. 
PROTECTIVE GLOVES
    To prevent skin contact, wear chemical-resistant gloves recommended by glove 
supplier for protection against materials in Section 2. 
EYE PROTECTION
    Wear safety spectacles with unperforated side shields. 
OTHER PRECAUTIONS
    Intentional misuse by deliberately concentrating and inhaling the contents 
can 
be harmful or fatal. 

SECTION 9 --  PHYSICAL AND CHEMICAL PROPERTIES

--------------------------------------------------------------------------------
PRODUCT WEIGHT                8.3 lb/gal    990 g/l
SPECIFIC GRAVITY            1.0
BOILING POINT                  <0 - 34 F    <-18- 1 C
MELTING POINT                  Not Available
VOLATILE VOLUME              7 %
EVAPORATION RATE            Faster than ether
VAPOR DENSITY                  Heavier than air
SOLUBILITY IN WATER          N.A.
VOLATILE ORGANIC COMPOUNDS  (VOC Theoretical)
    Volatile Weight 4 %        Less Water and Federally Exempt Solvents

SECTION 10 - STABILITY AND REACTIVITY

--------------------------------------------------------------------------------
STABILITY - Stable
CONDITIONS TO AVOID
    None known.
INCOMPATIBILITY
    None known.
HAZARDOUS DECOMPOSITION PRODUCTS
    By fire; Carbon Dioxide, Carbon Monoxide, Acetic Acid
HAZARDOUS POLYMERIZATION
    Will not occur

SECTION 11 --  TOXICOLOGICAL INFORMATION

--------------------------------------------------------------------------------
CHRONIC HEALTH HAZARDS
    Carbon Black is classified by IARC as possibly carcinogenic to humans (group 
2B) based on experimental animal data, however, there is insufficient evidence 
in humans for its carcinogenicity. 
    Rats exposed to titanium dioxide dust at 250 mg./m3 developed lung cancer, 
however, such exposure levels are not attainable in the workplace. 

TOXICOLOGY DATA
    CAS No.          Ingredient Name
  74-98-6        Propane
                  LC50    RAT    4HR    Not Available
                  LD50    RAT          Not Available
  106-97-8      Butane
                  LC50    RAT    4HR    Not Available
                  LD50    RAT          Not Available
    17689-77-9    Ethyl Triacetoxysilane
                              LC50    RAT    4HR    Not Available
                              LD50    RAT          Not Available
  4253-34-3      Methyl Triacetoxysilane 
                  LC50    RAT    4HR    Not Available
                  LD50    RAT          Not Available
  7631-86-9      Amorphous Silica
                  LC50    RAT    4HR    Not Available
                  LD50    RAT          Not Available
    13463-67-7        Titanium Dioxide
                              LC50    RAT    4HR    Not Available
                              LD50    RAT          Not Available
1333-86-4    Carbon Black
                  LC50    RAT    4HR    Not Available
                  LD50    RAT           Not Available
64-19-7      Acetic Acid
                  LC50    RAT    4HR     Not Available
                  LD50    RAT    3310 mg/kg

SECTION 12 --  ECOLOGICAL INFORMATION

--------------------------------------------------------------------------------
ECOTOXICOLOGICAL INFORMATION
No data available.

SECTION 13 --  DISPOSAL CONSIDERATIONS

--------------------------------------------------------------------------------
WASTE DISPOSAL METHOD
    Waste from these products may be hazardous as defined under the Resource 
Conservation and Recovery Act (RCRA)  40 CFR 261. Cured RTV is not hazardous. 
Spent containers contain propellant which meets the ignitability characteristic 
of hazardous waste. 
    Do not incinerate.  Depressurize container.  Dispose of in accordance with 
Federal, State/Provincial, and Local regulations regarding pollution.

SECTION 14 --  TRANSPORT INFORMATION

--------------------------------------------------------------------------------
No data available.

SECTION 15 - REGULATORY INFORMATION

--------------------------------------------------------------------------------
SARA 313 SUPPLIER NOTIFICATION  ( 40 CFR 372.65 C)
    No ingredient in these products is subject to SARA 313 (40 CFR 372.65C)
Supplier Notification. 

TSCA CERTIFICATION
    All chemicals in these products are listed, or are except from listing, on 
the 
TSCA inventory. 

SECTION 16 - OTHER INFORMATION

--------------------------------------------------------------------------------
    These products have been classified in accordance with the hazard criteria 
of 
the Canadian Controlled Products Regulations (CPR) and the MSDS contains all of 
the information required by the CPR.


    The above information pertains to these products as currently formulated, 
and 
is based on the information available at this time. Addition of reducers or 
other additives to these products may substantially alter the composition and 
hazards of the product. Since conditions of use are outside our control, we make 
no warranties, express or implied, and assume no liability in connection with 
any use of this information. 



    

The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.

Feedback