Product Categories See All
Track Order Status
SDS Sheet 0072280Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Misty(R) Multi-Purpose Disinfectant Cleaner II CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: 1.3. Name, Address, and Telephone of the Responsible Party Company Amrep, Inc. 990 Industrial Park Drive Marietta, GA 30062 Phone: 404-352-1680 1.4. Emergency Telephone Number Emergency | Compliance Services 1-877-428-9937, 877-541-2016 Toll Free - All number |Calls Recorded, CHEMTREC: 800-424-9300 - All Calls Recorded. In the |District of Columbia 202-483-7616. | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Gases under |Liquefied gas pressure | Carcinogenicit|Category 2 y | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Gas Cylinder |Health Hazard Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |H280 Contains gas under pressure; may explode if |heated. |H351 Suspected of causing cancer. Precautionary Statements |Prevention: (GHS-US) |P201 Obtain special instructions before use. |P202 Do not handle until all safety precautions have |been read and understood. |P281 Use personal protective equipment as required. |Response: |P308 + P313 IF exposed or concerned: Get medical |advice/attention. |Storage: |P405 Store locked up. |P410 + P403 Protect from sunlight. Store in a |well-ventilated place. |Disposal: |P501 Dispose of contents/container in accordance |with local regulation. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) 2-(2-Butoxyethoxy)ethanol |112-34-5 |>= 5 - <| | |10 | Butane |106-97-8 |>= 1 - <| | |5 | Amides, coco, |68603-42-9 |>= 0.1 -| N,N-bis(hydroxyethyl) | |< 1 | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: Do not leave the victim unattended. Show this safety data sheet to the doctor in attendance. Move out of dangerous area. First-aid Measures After Inhalation: If unconscious place in recovery position and seek medical advice. Consult a physician after significant exposure. First-aid Measures After Skin Contact: Wash off immediately with plenty of water for at least 15 minutes. If on clothes, remove clothes. If skin irritation persists, call a physician. First-aid Measures After Eye Contact: Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. Rinse immediately with plenty of water for at least 15 minutes. First-aid Measures After Ingestion: If swallowed. Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. DO NOT induce vomiting unless directed to do so by a physician or poison control center. Take victim immediately to hospital. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Alcohol-resistant foam Carbon dioxide (CO2) Dry chemical Water spray jet Unsuitable Extinguishing Media: High volume water jet. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Explosion Hazard: Hazardous combustion products: Carbon dioxide (CO2), Carbon monoxide, Smoke Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Do not allow run-off from fire fighting to enter drains or water courses. Firefighting Instructions: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Further information: For safety reasons in case of fire, cans should be stored separately in closed containments. Use a water spray to cool fully closed containers. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Protection During Firefighting: Wear self-contained breathing apparatus for firefighting if necessary. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Use personal protective equipment. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. If the product contaminates rivers and lakes or drains inform respective authorities. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Sweep up or vacuum up spillage and collect in suitable container for disposal. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Do not breathe vapours or spray mist. Take precautionary measures against static discharges. Provide sufficient air exchange and/or exhaust in work rooms. Dispose of rinse water in accordance with local and national regulations. Always replace cap after use. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: BEWARE: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 Â°C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. No smoking. Observe label precautions. Keep in a dry, cool and well-ventilated place. Electrical installations / working materials must comply with the technological safety standards. Materials to avoid: Strong oxidizing agents. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Components with workplace control parameters Components CAS-No. Value type (Form of exposure) Control parameters / Permissible concentration Basis butane 106-97-8 TWA 800 ppm 1,900 mg/m3 NIOSH REL TWA 800 ppm 1,900 mg/m3 OSHA P0 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Remarks: The suitability for a specific workplace |should be discussed with the producers of the |protective gloves. Eye Protection |Safety glasses. Ensure that eyewash stations and |safety showers are close to the workstation |location. Skin and Body Protection |Impervious clothing. Choose body protection |according to the amount and concentration of the |dangerous substance at the work place. Respiratory Protection |Use respiratory protection unless adequate local |exhaust ventilation is provided or exposure |assessment demonstrates that exposures are within |recommended exposure guidelines. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |Aerosol containing a liquefied gas Odor |Characteristic Odor Threshold |No data available pH |No data available Relative Evaporation Rate |No data available (butylacetate=1) | Melting Point |No data available Freezing Point |No data available Boiling Point |No data available Flash Point |Not applicable Auto-ignition Temperature |Not determined Decomposition Temperature |No data available Flammability (solid, gas) |The product is not flammable. Vapor Pressure |No data available Relative Vapor Density at 20 Â°C |No data available Relative Density | Specific Gravity | Solubility |Completely soluble Partition coefficient: | n-octanol/water | Viscosity |No data available Lower Flammable Limit |No data available Upper Flammable Limit |No data available 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Stable. 10.2 Chemical Stability Stable under normal conditions. 10.3 Possibility of Hazardous Reactions Vapours may form explosive mixture with air. No decomposition if stored and applied as directed. 10.4 Conditions to Avoid Heat, flames and sparks. Extremes of temperature and direct sunlight. 10.5 Incompatible Materials Strong oxidizing agents. 10.6 Hazardous Decomposition Products Carbon monoxide Carbon dioxide (CO2) Nitrogen oxides (NOx) SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: No data available. Serious Eye Damage/Irritation: No data available. Respiratory or Skin Sensitization: No data available. Germ Cell Mutagenicity: No data available. Carcinogenicity: No data available. Reproductive Toxicity: No data available. Specific Target Organ Toxicity (Single Exposure): No data available. Specific Target Organ Toxicity (Repeated Exposure): No data available. Aspiration Hazard: No data available. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity No data available. 12.2. Persistence and Degradability No data available. 12.3. Bioaccumulative Potential Product: Partition coefficient: n-octanol/water: Remarks: no data available Components: 2-(2-butoxyethoxy)ethanol: Partition coefficient: n-octanol/water: Pow: 1 butane: Partition coefficient: n-octanol/water: Pow: 2.89 Amides, coco, N,N-bis(hydroxyethyl): Partition coefficient: n-octanol/water:Remarks: no data available 12.4. Mobility in Soil no data available 12.5. Other Adverse Effects No data available. Product: Regulation: 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks: This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). Additional ecological information: No data available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Waste from residues: Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of in accordance with local regulations. The product should not be allowed to enter drains, water courses or the soil. Additional Information: Contaminated packaging: Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. Do not burn, or use a cutting torch on, the empty drum. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name | Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Vessel: AEROSOLS Hazard Class |2.2 Identification Number|UN1950 Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Cargo Air: AEROSOLS |Passenger Air: AEROSOLS Identification Number|UN1950 |<PICTOGRAM PHRASE> Hazard Class |2.2 | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations This product is regulated under the United States Federal Insecticide, Fungicide and Rodenticide Act (FIFRA). Pesticide Labeling Information Required Under U.S. FIFRA Regulations This chemical is a pesticide product registered by the Environmental Protection Agency and is subject to certain labeling requirements under federal pesticide law. These requirements differ from the classification criteria and hazard information required for safety data sheets, and for workplace labels of non-pesticide chemicals. Following is the hazard information as required on the pesticide label: CAUTION Harmful if swallowed. EPCRA - Emergency Planning and Community Right-to-Know Act: CERCLA Reportable Quantity: Components CAS-No. Component RQ (lbs) Calculated product RQ (lbs) 2,2'-iminodiethanol 111-42-2 100 * *: Calculated RQ exceeds reasonably attainable upper limit. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 302: SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313: SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA Section 311/312 Hazard Classes |Sudden Release of Pressure Hazard |Chronic Health Hazard Toxic Substances Control Act (TSCA) |On TSCA Inventory 15.2 US State Regulations California Prop 65: WARNING! This product contains a chemical known to the State of California to cause cancer. Amides, coco, N,N-bis(hydroxyethyl) 68603-42-9 Biphenyl-2-ol 90-43-7 2,2'-Iminodiethanol 111-42-2 SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |06/03/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----|Hazard statements |Contains gas under pressure; may explode if -- | |heated. Suspected of causing cancer. ----|Precautionary statements |Prevention: Obtain special instructions -- | |before use. Do not handle until all safety | |precautions have been read and understood. | |Use personal protective equipment as | |required. | |Response: IF exposed or concerned: Get | |medical advice/ attention. | |Storage: Store locked up. Protect from | |sunlight. Store in a well-ventilated place. | |Disposal: Dispose of contents/container in | |accordance with local regulation. Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.