SDS Sheet 0071640All SDS Go Back Print
Safety Data Sheet Date of Issue: 04/10/13 |Revision Date: |Revision Number: Imperial Supplies Part Number: 0071640 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: HEAVY DUTY BUTYL DEGREASER CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: General Purpose Cleaner and Degreaser 1.3. Name, Address, and Telephone of the Responsible Party Company Zep Inc. 1310 Seaboard Industrial Blvd. Atlanta, GA 30318 Phone: 1-877-793-7776 1.4. Emergency Telephone Number Emergency |For MSDS Information: Compliance Services 1-877-793-7776, For number |Medical Emergency: (877) 541-2016 Toll Free - All Calls Recorded, |For Transportation Emergency: CHEMTREC: (800) 424-9300 - All Calls |Recorded In the District of Columbia (202) 483-7616 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Butyl Cellosolve; Ethylene |111-76-2 |20 - 30 | Glycol Monobutyl Ether; | | | 2-Butoxyethanol | | | SXS; sodium xylenesulphonate |1300-72-7 |1 - 10 | Sodium Metasilicate |6834-92-0 |1 - 5 | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Move exposed person to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. First-aid Measures After Skin Contact: Flush affected skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if irritation develops. First-aid Measures After Eye Contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention immediately. First-aid Measures After Ingestion: Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. If affected person is conscious, give plenty of water to drink. Never give anything by mouth to an unconscious person. Get medical attention immediately. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Avoid breathing vapors, spray or mists. Over-exposure by inhalation may cause respiratory irritation. Can cause central nervous system (CNS) depression. Symptoms/Injuries After Skin Contact: Causes skin irritation. Harmful if absorbed through the skin. Skin inflammation is characterized by itching, scaling, reddening or, occasionally, blistering. Symptoms/Injuries After Eye Contact: Causes eye irritation. Liquid in eye may cause irritation with possible damage if not rinsed immediately. Inflammation of the eye is characterized by redness, watering and itching. Symptoms/Injuries After Ingestion: Harmful if swallowed. May cause burns to mouth, throat and stomach. Chronic Symptoms: Contains material which may cause damage to the following organs: blood, kidneys, liver, lymphatic system, upper respiratory tract, skin, central nervous system (CNS), eye, lens or cornea. Repeated or prolonged contact with spray or mist may produce chronic eye irritation and severe skin irritation. Overexposure of this product by inhalation or absorption can produce central nervous system depression resulting in headache, nausea and/or dizziness. 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: In a fire or if heated, a pressure increase will occur and the container may burst. May emit toxic fumes under fire conditions. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Use an extinguishing agent suitable for the surrounding fire. Do not release runoff from fire to drains or watercourses. Fire-fighters should wear appropriate protective equipment. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Put on appropriate personal protective equipment (see section 8). Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Put on appropriate personal protective equipment (see section 8). Avoid contact with eyes, skin and clothing. Do not breathe vapor or mist. Use with adequate ventilation. Do not ingest. Do not reuse container. Wash thoroughly after handling. Observe label precautions. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Store between the following temperatures: 40Â°F - 120Â°F (4.4Â°C - 49Â°C). Keep out of the reach of children. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Product name Exposure limits Butyl Cellosolve; Ethylene Glycol Monobutyl Ether; 2-Butoxyethanol OSHA PEL 1989 (United States, 3/1989). Absorbed through skin. TWA: 25 ppm 8 hour(s). TWA: 120 mg/mÂ³ 8 hour(s). NIOSH REL (United States, 6/2009). Absorbed through skin. TWA: 5 ppm 10 hour(s). TWA: 24 mg/mÂ³ 10 hour(s). ACGIH TLV (United States, 2/2010). TWA: 20 ppm 8 hour(s). OSHA PEL (United States, 6/2010). Absorbed through skin. TWA: 50 ppm 8 hour(s). TWA: 240 mg/mÂ³ 8 hour(s). 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection | Splash goggles. Skin and Body Protection |Wear appropriate protective clothing to prevent skin |contact. Recommended: Neoprene gloves. Nitrile |gloves. Rubber gloves. Synthetic apron. Respiratory Protection |Use with adequate ventilation. Provide exhaust |ventilation or other engineering controls to keep |the airborne concentrations of vapors below their |respective occupational exposure limits. Wear |appropriate respirator when ventilation is |inadequate. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid. [Clear.] Appearance | Odor |Mild. Odor Threshold | pH |12.5 to 13.5 Relative Evaporation Rate |1 (Water = 1) (butylacetate=1) | Melting Point | Freezing Point | Boiling Point |104.44Â°C (220Â°F) Flash Point |Not applicable. Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |Not available. Relative Vapor Density at 20 Â°C |Not available. Relative Density | Specific Gravity |1.02 Solubility |Easily soluble in the following materials: |cold water and hot water. Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit |Not available. Upper Flammable Limit |Not available. 9.2. Other Information VOC (Consumer): 22.6 % (w/w) 1.92 lbs/gal (230.5 g/l) SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity The product is stable. 10.2 Chemical Stability The product is stable. 10.3 Possibility of Hazardous Reactions Hazardous Polymerization: Under normal conditions of storage and use, hazardous polymerization will not occur. 10.4 Conditions to Avoid 10.5 Incompatible Materials Reactive or incompatible with the following materials: oxidizing materials and acids. 10.6 Hazardous Decomposition Products Carbon oxides (CO, CO2). SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: No known significant effects or critical hazards. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects Environmental Effects: Not available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Waste Information: Waste must be disposed of in accordance with federal, state and local environmental control regulations. Consult your local or regional authorities for additional information. Waste Stream: Code: D002 Classification: Hazardous waste - Corrosivity Origin: RCRA waste. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated. Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated. Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA 313 toxic chemical notification and release reporting: Product name 2-butoxyethanol Clean Water Act (CWA) 311: No products were found. Clean Air Act (CAA) 112 regulated toxic substances: No products were found. SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |All Components of this product are listed or |exempt from listing on TSCA Inventory. 15.2 US State Regulations <COMPONENT> California Prop 65: No products were found. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date | Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.