Product Categories See All
Track Order Status
MSDS Sheet 0071480Printer Friendly View
Material Safety Data Sheet Zep Inc. Section 1. Chemical Product and Company Identification 1310 Seaboard Industrial Product name Z-WORKS AEROSOL PTFE LUBRICANT Blvd Product use Aerosol Lubricant & Penetrant Atlanta, GA 30318 Product code R070 1-877-793-7776 Date of issue 07/17/08 Supercedes Emergency Telephone Numbers For MSDS Information: Compliance Services 1-877-793-7776 For Medical Emergency INFOTRAC: (877) 541-2016 Toll Free - All Calls Recorded For Transportation Emergency CHEMTREC: (800) 424-9300 - All Calls Recorded In the District of Columbia (202) 483-7616 Prepared by Compliance Services 1420 Seaboard Industrial Blvd Atlanta, GA 30318 Section 2. Hazards Identification Emergency overview *Hazard Determination System (HDS): Health, Flammability, Reactivity DANGER! 2 3 0 FLAMMABLE. VAPOR HARMFUL. CAUSES EYE AND SKIN IRRITATION. CONTENTS UNDER PRESSURE. NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse effects are lessened by following all prescribed safety precautions, including the use of proper personal protective equipment. Acute Effects Routes of Entry Dermal contact. Eye contact. Inhalation Eyes Causes eye irritation. Inflammation of the eyes is characterized by redness, watering and itching. Skin May cause skin irritation. May be harmful if absorbed through the skin. Skin inflammation is characterized by itching, scaling, or reddening. Inhalation Avoid breathing vapors, spray or mists. Over-exposure by inhalation may cause respiratory irritation. Can cause central nervous system (CNS) depression. Ingestion Harmful if swallowed. Aspiration hazard if swallowed. Can enter lungs and cause damage. Chronic effects Prolonged or repeated contact may dry skin and cause irritation. Repeated or prolonged exposure to the substance can product target organs damage. Contains material which may cause damage to the following organs: blood, kidneys, lungs, the nervous system, liver, heart, spleen, central nervous system (CNS), ears, eye, lens or cornea, testes. Additional Information: See Toxicological Information (Section 11) Section 3. Composition/Information on Ingredients Name of Hazardous Ingredients CAS number % by Weight LIGHT ALIPHATIC NAPHTHA; solvent naphtha (petroleum), 64742-88-7 10-20 medium aliphatics; formerly: light aromatic naphtha LIGHT AROMATIC NAPHTHA; aromatic hydrocarbon solvent; 64742-95-6 10-20 solvent naphtha (petroleum) PARAFFIN OIL; blend of heavy and light naphthenic 64742-52-5 10-20 petroleum distillate Proprietary Blended Salts of Oxygenated and Proprietary 10-20 Sulfonated Hydrocarbons ETHANOL; ethyl alcohol; grain alcohol 64-17-5 5-15 1,2,4-TRIMETHYLBENZENE 95-63-6 1-10 MINERAL SEAL OIL; mineral oil; petrolatum 64741-77-1 1-10 BLEND OF AMYL ACETATE; 3-METHYL BUTYL ACETATE; 628-63-7; 1-10 2-METHYL BUTYL ACETATE 123-92-2; 624-41-9 DIETHYLENE GLYCOL MONOBUTYL ETHER; 112-34-5 1-5 2-(2-butoxyethoxy)-ethanol; butyl carbitol CARBON DIOXIDE 124-38-9 1-5 Section 4. First Aid Meausres Eye Contact Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention immediately. Skin Contact Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if irritation develops. Inhalation Move exposed person to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. Ingestion Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that the vomit does not enter the lungs. If affected person is conscious, give plenty of water to drink. Never give anything by mouth to an unconscious person. Get medical attention immediately. Section 5. Fire Fighting Measures National Fire Protection Association (U.S.A.) Flash Point Not available. 2 3 0 Flammable Not available. Limits Flammability FLAMMABLE (CSMA Method) Fire hazard Flammable aerosol. Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of subsequent explosion. Gas may accumulate in low or confined areas or travel a considerable distance to a source of ignition and flash back, causing fire or explosion. Bursting aerosol containers may be propelled from a fire at high speed. Fire-Fighting Use an extinguishing agent suitable for the surrounding fire. Procedures Cool closed containers exposed to fire with water. Fire-fighters should wear appropriate protective equipment. Section 6. Accidental Release Measures Spill Clean up Large spills are unlikely due to packaging. Section 7. Handling and Storage Handling Put on appropriate personal protective equipment (see section 8). Store and use away from heat, sparks, open flame or any other ignition source. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Observe label precautions. Wash contaminated clothing before reusing. Wash thoroughly after handling. Storage CONTENTS UNDER PRESSURE. Eliminate all ignition sources. Do no puncture, incinerate or store the container at temperatures above 49Â°C (120Â°F) or in direct sunlight. Keep out of the reach of children. Section 8. Exposure Controls/Personal Protection Product Name Exposure Limits LIGHT ALIPHATIC NAPHTHA; solvent naphtha ACGIH TLV (United States). (petroleum), medium aliphatics; formerly: light STEL: 200 ppm 8 hour(s). aromatic naphtha OSHA PEL (United States). TWA: 500 ppm 8 hour(s). ACGIH TLV (United States). TWA: 100 ppm 8 hour(s). PARAFFIN OIL; blend of heavy and light OSHA PEL (United States). naphthenic petroleum distillate TWA: 5 mg/mÂ³ 8 hour(s). Form: Mist ACGIH TLV (United States). TWA: 5 mg/mÂ³ 8 hour(s) Form: Mist Proprietary Blended Salts of Oxygenated and ACGIH TLV (United States). Sulfonated Hydrocarbons : 5 mg/mÂ³ ETHANOL; ethyl alcohol; grain alcohol ACGIH TLV/OSHA PEL (United States). TWA 1000 ppm 8 hour(s) . 1,2,4-TRIMETHYLBENZENE ACGIH TLV (United States). TWA: 25 ppm 8 hour(s). OSHA PEL (United States). TWA: 25 ppm 8 hour(s). MINERAL SEAL OIL; mineral oil; petrolatum OSHA PEL (United States). : 5 mg/mÂ³ 8 hour(s). Form: Mist ACGIH TLV (United States). : 5 ppm 8 hour(s). Form: Mist BLEND OF AMYL ACETATE; 3-METHYL BUTYL ACETATE; OSHA PEL (United States). 2-METHYL BUTYL ACETATE TWA: 100 ppm 8 hour(s). ACGIH TLV (United States). TWA: 50 ppm 8 hour(s). STEL: 100 ppm 15 minute(s). DIETHYLENE GLYCOL MONOBUTYL ETHER; Manufacturer (United States). 2-(2-butoxyethoxy)-ethanol; butyl carbitol TWA: 35 ppm 8 hour(s). CARBON DIOXIDE ACGIH TLV (United States). TWA: 5000 ppm 8 hour(s). STEL: 30000 ppm 15 minute(s). Personal Protective Equipment (PPE) Eyes Safety glasses. Body For prolonged or repeated handling use gloves. Recommended: Neoprene gloves. Nitrile gloves. Rubber gloves. Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective occupational exposure limits. Wear appropriate respirator when ventilation is inadequate. Section 9. Physical and Chemical Properties Physical Liquid. [Aerosol.] Color Amber State pH Not applicable Odor Sweetish. Solvent-like. Boiling 179.44Â°C (355Â°F) Vapor Not determined. Point Pressure Specific 0.86 Vapor Not determined. Gravity Density Solubility Insoluble in the following Evaporation <1 (water=1) materials: cold water and Rate hot water VOC 429 (g/l). 3.58 lbs/gal (Consumer) (49.9%) Section 10. Stability and Reactivity Stability and Reactivity The product is stable. Incompatibility Keep away from heat, sparks and flame. Reactive or incompatible with the following materials: oxidizing materials. Hazardous Polymerization Will not occur. Hazardous Decomposition carbon oxides (CO, CO?) Products Section 11. Toxicological Information Acute Toxicity Product/ingredient name Result Species Dose Exposure Ethanol LD50 Oral Rat 7060 mg/kg - LC50 Inhalation Rat 20000 mg/mÂ³ 4 hours Vapor Light Aromatic Naphtha LD50 Oral Rat 4700 mg/kg - LC50 Inhalation Rat 3670 ppm 8 hours Vapor 1,2,4-Trimethylbenzene LD50 Oral Rat 5000 mg/kg - Diethylene Glycol Monobutyl LD50 Dermal Rabbit 2700 mg/kg - Ether LD50 Oral Rat 5660 mg/kg - LD50 Oral Mouse 2400 mg/kg - Section 12. Ecological Information Environmental Effects No known significant effects or critical hazards Aquatic Ecotoxicity Not available. Section 13. Disposal Considerations Waste Information Waste must be disposed of in accordance with federal, state and local environmental control regulations. Consult your local or regional authorities for additional information. Waste Stream Code: D001 Classification: -[Hazardous waste] Origin: - [RCRA waste.] Section 14. Transport Information Regulatory UN number Proper shipping name Classe PG* Label information s DOT Classification Not Consumer commodity regulated. ORM-D IMDG Class Not determined. NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to the Bill of Lading with your shipment. PG*: Packing group Section 15. Regulatory Information U.S. Federal Regulations SARA 313 toxic chemical notification and release reporting: Product name 1,2,4-Trimethylbenzene Diethylene Glycol Monobutyl Ether Clean Water Act (CWA) 307: No products were found. Clean Water Act (CWA) 311: Benzene Clean Air Act (CAA) 112 regulated toxic substances: No products were found. All Components of this product are listed or exempt from listing on TSCA inventory. State Regulations California Prop 65 WARNING: This product contains a chemical or chemicals known the state of California to cause cancer, birth defects, or other reproductive harm.: Toluene, Benzene, Naphthalene Section 16. Other Information To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. *NOTE: Hazard Determination System (HDS) ratings are based on a 0-4 scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although these ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HDS ratings are to be used with a fully implemented program to relay the meanings of this scale.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.