Product Categories See All
Track Order Status
MSDS Sheet 0071380Printer Friendly View
Material Safety Data Sheet Zep Zep Inc. Section 1. Chemical Product and Company Profession 1310 Seaboard Industrial Identification al Blvd. Atlanta, GA 30318 1-877-7937776 Product name Z -WORKS SOY PENETRATING LUBRICANT Product use Aerosol Penetrating Lubricant Product code R073 Date of issue 07/18/08 Supersedes Emergency Telephone Numbers For MSDS Information: Compliance Services 1-877-793-7776 For Medical Emergency INFOTRAC: (877) 541-2016 Toll Free - All Calls Recorded For Transportation Emergency CHEMTREC: (800) 424-9300 - All Calls Recorded In the District of Columbia (202) 483-7616 Prepared By Compliance Services 1420 Seaboard Industrial Blvd. Atlanta, GA 30318 Section 2: Hazards Identification Emergency overview *Hazard Determination System (HDS): Health, Flammability, Reactivity DANGER ! 1 3 0 FLAMMABLE. CAUSES EYE IRRITATION. CONTENTS UNDER PRESSURE. NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse effects are lessened by following all prescribed safety precautions, including the use of proper personal protective equipment. Acute Effects Routes of Entry Dermal contact. Inhalation. Eyes Causes eye irritation. Inflammation of the eye is characterized by redness, watering and itching. Skin May cause skin irritation. May cause allergic reactions in certain individuals. Skin inflammation is characterized by itching, scaling, or reddening. Inhalation Avoid breathing vapors, spray or mists. Over-exposure by inhalation may cause respiratory irritation. Ingestion May be harmful if swallowed. Aspiration hazard if swallowed. Can enter lungs and cause damage. Chronic effects Prolonged or repeated contact may dry skin and cause irritation. Additional information: See Toxicological Information (Section 11) Section 3. Composition/Information on Ingredients Name of Hazardous Ingredients CAS number % by Weight ALKYL (C16-C18) METHYL ESTERS 67784-80-9 60-80 BLEND OF ISOBUTANE & PROPANE 74-98-6; 10-20 75-28-5 Section 4. First Aid Measures Eye Contact Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention immediately. Skin Contact Flush contaminated skin with plenty of water. Get medical attention if irritation develops. Inhalation Move exposed person to fresh air. If irritation persists, get medical attention. Ingestion Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so the vomit does not enter the lungs. If affected person is conscious, give plenty of water to drink. Never give anything by mouth to an unconscious person. Get medical attention immediately. Section 5. Fire Fighting Measures National Fire Protection Association (U.S.A.) Flash Point Not available. Flammable Limits Not available. Flammability FLAMMABLE. (CSMA Method) Fire hazard Flammable aerosol. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion. Bursting aerosol containers may be propelled from a fire at high speed. Rags, steel wool or other wastes soaked with product may spontaneously catch fire if improperly discarded. Fire-Fighting Use an extinguishing agent suitable for the Procedures surrounding fire. Cool closed containers exposed to fire with water. Fire-fighters should wear appropriate protective equipment. Section 6. Accidental Release Measures Spill Clean up Large spills are unlikely due to packaging. Section 7. Handling and Storage Handling Put on appropriate personal protective equipment (see section 8). Store and use away from heat, sparks, open flame or any other ignition source. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation. Observe label precautions. Wash contaminated clothing before reusing. Wash thoroughly after handling. Storage CONTENTS UNDER PRESSURE. Eliminate all ignition sources. Do not puncture, incinerate or store the container at temperatures above 49Â°C (120Â°F) or in direct sunlight. Rags, steel wool or other wastes soaked with product may spontaneously catch on fire if improperly discarded. Keep out of the reach of children. Section 8. Exposure Controls/Personal Protection Product name Exposure Limits BLEND OF ISOBUTANE & PROPANE ACGIH TLV (United States). TWA:800 ppm 8 hour(s) OSHA PEL (United States). TWA: 1000 ppm 8 hour(s). Personal Protective Equipment (PPE) Eyes Safety glasses. Body Recommended: Neoprene gloves. Nitrile gloves. Rubber gloves. Respiratory Use with adequate ventilation. Section 9. Physical and Chemical Properties Physical State Liquid. [Aerosol.] Color Amber. Brown. pH Not available. Odor Pleasant. Boiling Point >315Â°C (>599Â°F) Vapor Pressure Not determined. Specific Gravity 0.891 Vapor Density Not determined. Solubility Emulsifies in Evaporation Rate Not determined. water. VOC (Consumer) 134(g/l). 1.1Ibs/gal (15.1%) Section 10. Stability and Reactivity Stability and Reactivity The product is stable. Incompatibility Keep away from heat, sparks and flame. Reactive or incompatible with the following materials: oxidizing materials and acids. Hazardous Polymerization Will not occur. Hazardous Decomposition carbon oxides (CO, CO2) Products Section 11. Toxicological Information Acute Toxicity Not available. Section 12. Ecological Information Environmental Effects No known effects or critical hazards. Aquatic Ecotoxicity Not available. Section 13. Disposal Considerations Waste Information Waste must be disposed of in accordance with federal, state and local environmental control regulations. Consult your local or regional authorities for additional information. Waste Stream Code: D001 Classification: - [Hazardous waste.] Origin: - [RCRA waste.] Section 14. Transport Information Regulatory UN number Proper shipping name Classes PG* Label information DOT Not regulated. Consumer commodity ORM-D Classification IMDG Class Not determined. NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to the Bill of Lading with your shipment. PG* : Packing group Section 15. Regulatory Information U.S. Federal Regulations SARA 313 toxic chemical notification and release reporting: No products were found. Clean Water Act (CWA) 307: No products were found. Clean Water Act (CWA) 311: No products were found. Clean Air Act (CAA) 112 regulated toxic substances: No products were found. All Components of this product are listed or exempt from listing on TSCA Inventory. State Regulations California Prop 65 No products were found. Section 16. Other Information To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. *NOTE: Hazard Determination System (HDS) ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although these ratings are not required on the MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HDS ratings are to be used with a fully implemented program to relay the meanings of this scale.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.