Product Categories See All
Track Order Status
SDS Sheet 0067280Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: 6/14/13 |Revision Number: Imperial Supplies Part Number: 0067280 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Tracing Powder Product Name: CastleÂ® Leak Tracing Powder CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: 1.3. Name, Address, and Telephone of the Responsible Party Company Castle Products, Inc. 424 St. Paul Street Rochester, NY 14605 Phone: 800-876-0222 1.4. Emergency Telephone Number Emergency |585-275-3232 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Gas |Flame |Exclamat| | | |Cylinder| |ion Mark| | | Signal Word (GHS-US) |DANGER Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Hexane |110-54-3, 64742-49-0 |60-100% | Propane/Isobutane/N-Butane |68476-86-8 |10-30% | Zinc Stearate |67762-34-9 |1-5% | Surface Treated Silica |68611-44-9 |1-5% | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Immediately remove from further exposure. Give supplemental oxygen, if breathing is difficult. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation. First-aid Measures After Skin Contact: For skin contact flush with large amounts of water. Call a physician if irritation persists. First-aid Measures After Eye Contact: Hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Call a physician if irritation persists. First-aid Measures After Ingestion: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. If swallowed, do NOT induce vomiting. Give a glass of water. Never give anything by mouth to an unconscious person. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Note to physician: If the product is ingested, treat the affected person symptomatically. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Appropriate for surrounding fire. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: None. Explosion Hazard: None. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Pressure can build up in containers if exposed to heat (fire). Keep containers in surrounding areas cool with water spray. As in any fire, wear pressure-demand self-contained breathing apparatus, MSHA/NIOSH (approved or equivalent) and full protective gear. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Isolate area. Keep unnecessary personnel away. Stay upwind. Keep out of low areas. Ventilate spaces before entering. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Prevent further leakage or spillage if safe to do so. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Prevent entry into waterways, sewers, basements or confined areas. Methods for Cleaning Up: Eliminate ignition sources including sources of electrical, static or frictional sparks. Wear appropriate protective equipment and clothing during clean-up. Small Spills: Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for Disposal. Large Spills: Dike far ahead of liquid spill for later disposal. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance, contact your State Water Board or Regional Office of the EPA. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Aerosol is extremely flammable. Do not store near heat, sparks, or flames. Avoid breathing mist. Avoid contact with skin and eyes. Wear suitable protective clothing. Wash hands after handling. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep from freezing. Keep containers tightly closed. Store in a cool, dry place. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Occupational exposure limits: None Established. 8.2. Exposure Controls Appropriate Engineering |Use local exhaust ventilation. Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Gloves: Wear impervious gloves. Eye Protection |Wear safety glasses or goggles. Skin and Body Protection |Wear clothing suited to the task being performed. Respiratory Protection |Not normally required if good ventilation is |maintained. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |White Powder Odor |Solvent Odor Threshold | pH |NA Relative Evaporation Rate |ND (butylacetate=1) | Melting Point | Freezing Point | Boiling Point |ND Flash Point |>=-141Â°F (>=-96Â°C) Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |ND Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity |0.68 Solubility |ND Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit |ND Upper Flammable Limit |ND 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions Will not occur. 10.4 Conditions to Avoid 10.5 Incompatible Materials Strong oxidizing agents. 10.6 Hazardous Decomposition Products Carbon Oxides, fumes. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects Component Test Results: None reported. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Disposal instructions: Dispose according to all applicable Federal, State, and Local regulations. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Consumer Commodity ORM-D, or Limited Quantity. Hazard Class |ORM-D |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Aerosols. Hazard Class |2.1 Identification Number|UN1950 Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Aerosols, Flammable. Identification Number|UN1950 |<PICTOGRAM PHRASE> Hazard Class |2.1 | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> CERCLA (Superfund) reportable quantity: None SARA (Superfund Amendments and Reauthorization Act of 1986): 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. Section 302 extremely hazardous substance: No. SARA Section 311/312 Hazard Classes |No. Toxic Substances Control Act (TSCA) |All components are listed in the United |States TSCA Regulations. 15.2 US State Regulations <COMPONENT> SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |6/14/13 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.