Product Categories See All
Track Order Status
Sheet 0067250Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: STRIKE-HOLD CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: 1.3. Name, Address, and Telephone of the Responsible Party Company MPH SYSTEM SPECIALTIES, INC. 11213 Hwy 53, E. Marble Hill, GA. 30148 U.S.A. Phone: 1-866-331-0572 1.4. Emergency Telephone Number Emergency | 1-800-424-9300 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Aspiration |Category 1. hazard | Slightly |Category 1. Flammable | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Health Hazard |Flame Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |Avoid eye and skin contact. |Avoid inhalation, use with adequate ventilation. |Keep away from heat and ignition sources. |Do not puncture container. |Store in secure area in accordance with local / regional / national / international regulations. Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Perchloroethylene |127-18-4 |40 - 50 | Hydrotreated Naphthenic |64742-53-6 |25 - 35 | Distillate | | | Bis(tridecyl) Adipate |16958-92-2 |5 - 8 | Metal Working Additive |Mixture |8 - 12 | Carbon Dioxide |124-38-9 |3 - 5 | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: NOTES TO PHYSICIANS OR FIRST AID PROVIDERS: Contains petroleum distillates, vomiting may cause aspiration pneumonia hazard. Do not administer adrenaline or epinephrine to a victim of chlorinated solvent poisoning. First-aid Measures After Inhalation: Move to fresh air. Get medical attention if irritation persists. First-aid Measures After Skin Contact: Remove contaminated clothing. Thoroughly was with soap and water. Consult physician if irritation persists. First-aid Measures After Eye Contact: Flush immediately with water for 15 minutes. Consult physician if irritation persists. First-aid Measures After Ingestion: Do not induce vomiting. Get immediate medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water spray or fog, Foam, CO2, Dry Chemical Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Explosion Hazard: Contents under pressure. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Treat as pressurized container. Keep aerosol containers cooled with water fog to avoid rupture. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Large spills are unlikely due to aerosol packaging. Ventilate area. Soak up with absorbant material and dispose of accordingly. Wear appropriate protective clothing. Eliminate all sources of ignition and ventilate area. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Keep away from heat. Keep away from ignition sources. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in well ventilated areas. Avoid breathing vapors. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |Sufficient to control airborne levels. Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Long term protection-Nitrile rubber gloves. |Incidental contact-PVC or neoprene gloves. Eye Protection |Safety glasses. Skin and Body Protection |Not required - avoid contact with skin. Respiratory Protection |Wear appropriate respirator when ventilation is |inadequate. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Aerosol can Appearance |Liquid, Amber in color Odor |Mild petroleum oder, Ether, Solvent Odor Threshold | pH |Not Applicable Relative Evaporation Rate |(Ethyl Ether = 1) < 1 (butylacetate=1) | Melting Point |Not Applicable Freezing Point |Not Applicable Boiling Point |250� F Flash Point |> 400 F (> 204 C) Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |5172 @ 68� F Relative Vapor Density at 20 �C | Relative Density | Specific Gravity |> 1 @ 68� F Solubility |Immiscible. Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit |NE Upper Flammable Limit |NE | 9.2. Other Information VOLATILE ORGANIC COMPOUNDS BY WT (VOC): 0% PERCENT VOLATILE BY WT: 67 % @ 68� F SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable 10.3 Possibility of Hazardous Reactions None known. 10.4 Conditions to Avoid Open flames, ignition sources, temperatures above 140� F. 10.5 Incompatible Materials Strong oxidizers, strong alkalis. 10.6 Hazardous Decomposition Products Heated decomposition products may form oxides of carbon, hydrogen chloride. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity ECOTOXICITY: May be harmful to aquatic organisms. Spills may form a film on water surfaces causing physical damage to organisms. Oxygen transfer could also be impaired. 12.2. Persistence and Degradability This product is moderatly biodegradable. 12.3. Bioaccumulative Potential 12.4. Mobility in Soil Spillages are unlikely to penetrate the soil. 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Do not puncture can or incinerate. Incinerate properly in commercial incinerator in accordance with local regulations. Empty container may be disposed in sanitary landfill or recycled. Additional Information: RCRA HAZARD CLASS: This product may be a RCRA Hazardous waste upon disposal due to the ignitability characteristic and chlorinated solvent. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Consumer Commodity ORM-D |WATER TRANSPORTATION: Aerosol |AIR TRANSPORTATION: Aerosol Hazard Class |6.1 |<PICTOGRAM PHRASE> |WATER TRANSPORTATION: | |6.1 | |AIR TRANSPORTATION: 6.1| Identification Number|WATER TRANSPORTATION: | |1950 | |AIR TRANSPORTATION: | |1950 | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> CERCLA (COMPREHENSIVE RESPONSE COMPENSATION, AND LIABILITY ACT): Tetrachlorethylene RQ: 100 lbs SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT): 313 REPORTABLE INGREDIENTS: Tetrachlorethylene CAS# 127-18-4 40% SARA Section 311/312 Hazard Classes |Immediate, Delayed, Fire Toxic Substances Control Act (TSCA) |All components are TSCA registered. 15.2 US State Regulations <COMPONENT> SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |04/25/15 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.