Product Categories See All
Track Order Status
SDS Sheet 0067180Printer Friendly View
Safety Data Sheet Date of Issue: |Revision Date: Feb 11, 2015|Revision Number: 1.0 Imperial Supplies Part Number: 0067180 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Food Grade Lubricant CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: 1.3. Name, Address, and Telephone of the Responsible Party Company Todco Overhead Door Corp 1332 Fairground Road E Marion, OH, US, 43302 Phone: (740) 383-6376 1.4. Emergency Telephone Number Emergency | number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Aerosol |Category 1 | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Flame | | | | | Signal Word (GHS-US) |Danger Hazard Statements (GHS-US) |H222, H229 - Extremely flammable aerosol, |Pressurized container may burst if heated Precautionary Statements |General (GHS-US) |P101 - If medical advice is needed, have product |container or label at hand. |P102 - Keep out of reach of children. |P103 - Read label before use. |Prevention |P210 - Keep away from heat, hot surfaces, sparks, |open flames and other ignition sources. No smoking. |P211 - Do not spray on an open flame or other |ignition source. |P251 - Do not pierce or burn, even after use. |Storage |P410 - Protect from sunlight. |P412 - Do not expose to temperatures exceeding |50Â°C/122Â°F. |P403 - Store in a well-ventilated place. |P233 - Keep container tightly closed. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) MINERAL OIL, SLAB OIL |0008042-47-5 |51% - | | |90% | PROPANE |0000074-98-6 |5% - 11%| Soybean oil, Me ester |0067784-80-9 |5% - 10%| BUTANE |0000106-97-8 |2% - 4% | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove source of exposure or move person to fresh air and keep comfortable for breathing. If exposed/feel unwell/concerned: Call a POISON CENTER/doctor. Eliminate all ignition sources if safe to do so. First-aid Measures After Skin Contact: Take off immediately all contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Gently blot or brush away excess product. Wash with plenty of lukewarm, gently flowing water for a duration of 15-20 minutes. Call a POISON CENTER/doctor if you feel unwell. Store contaminated clothing under water and wash before reuse or discard. First-aid Measures After Eye Contact: Remove source of exposure or move person to fresh air. Rinse eyes cautiously with lukewarm, gently flowing water for several minutes, while holding the eyelids open. Remove contact lenses, if present and easy to do. Continue rinsing for a duration of 15-20 minutes. Take care not to rinse contaminated water into the unaffected eye or onto the face. If eye irritation persists: Get medical advice/attention. First-aid Measures After Ingestion: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor/. If vomiting occurs naturally, lie on your side, in the recovery position. Never give anything by mouth to an unconscious or convulsing victim. Keep person warm and quiet. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use water, fog, dry chemical, or carbon dioxide. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam. Unsuitable Extinguishing Media: Water may be ineffective but can be used to cool containers exposed to heat or flame. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Contents under pressure. Keep away from ignition sources and open flames. Exposure of containers to extreme heat and flames can cause them to rupture often with violent force. Aerosol cans may rupture when heated. Heated cans may burst. In fire, will decompose to carbon dioxide, carbon monoxide. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done safely. Move undamaged containers from immediate hazard area if it can be done safely. Water spray may be useful in minimizing or dispersing vapors and to protect personnel. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations. Protection During Firefighting: Wear protective pressure self-contained breathing apparatus (SCBA)and full turnout gear. Care should always be exercised in dust/mist areas. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: ELIMINATE all ignition sources (no smoking, flares, sparks, or flames in immediate area). Use explosion proof equipment. Avoid breathing vapor. Avoid contact with skin, eye or clothing. Do not touch damaged containers or spilled materials unless wearing appropriate protective clothing. 6.1.1. For Non-emergency Personnel Protective Equipment: ELIMINATE all ignition sources (no smoking, flares, sparks, or flames in immediate area). Use explosion proof equipment. Avoid breathing vapor. Avoid contact with skin, eye or clothing. Do not touch damaged containers or spilled materials unless wearing appropriate protective clothing. Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: ELIMINATE all ignition sources (no smoking, flares, sparks, or flames in immediate area). Use explosion proof equipment. Avoid breathing vapor. Avoid contact with skin, eye or clothing. Do not touch damaged containers or spilled materials unless wearing appropriate protective clothing. Emergency Procedures: Flammable/combustible material. ELIMINATE all ignition sources (no smoking, flares, sparks, or flames in immediate area). Stay upwind; keep out of low areas. Immediately turn off or isolate any source of ignition. Keep unnecessary people away; isolate hazard area and deny entry. Do not touch or walk through spilled material. Clean up immediately. Use absorbent sweeping compound to soak up material and put into suitable container for proper disposal. 6.2. Environmental Precautions Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems and natural waterways by using sand, earth, or other appropriate barriers. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: For industrial and institutional use only. For use by trained personnel only. Keep away from children. Wash hands after use. Do not get in eyes, on skin or on clothing. Do not breathe vapors or mists. Use good personal hygiene practices. Eating, drinking and smoking in work areas is prohibited. Remove contaminated clothing and protective equipment before entering eating areas. Eyewash stations and showers should be available in areas where this material is used and stored. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Ventilation Requirements: Use only with adequate ventilation to control air contaminants to their exposure limits. The use of local ventilation is recommended to control emissions near the source. Storage Conditions: Keep container(s) tightly closed and properly labeled. Store in cool, dry, well-ventilated areas away from heat, direct sunlight and incompatibilities. Store in approved containers and protect against physical damage. Keep containers securely sealed when not in use. Indoor storage should meet OSHA standards and appropriate fire codes. Containers that have been opened must be carefully resealed to prevent leakage. Empty container retain residue and may be dangerous. Do not cut, drill, grind, weld, or perform similar operations on or near containers. Do not pressurize containers to empty them. Ground all structures, transfer containers and equipment to conform to the national electrical code. Use procedures that prevent static electrical sparks. Static electricity may accumulate and create a fire hazard. Store at temperatures below 120Â°F. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |Chemical goggles, safety glasses with side shields |or vented/splash proof goggles. Contact lenses may |absorb irritants. Particles may adhere to lenses and |cause corneal damage. Skin and Body Protection |Wear gloves, long sleeved shirt, long pants and |other protective clothing as required to minimize |skin contact. |Use of gloves approved to relevant standards made |from the following materials may provide suitable |chemical protection: PVC, neoprene or nitrile rubber |gloves. Suitability and durability of a glove is |dependent on usage, e.g. frequency and duration of |contact, chemical resistance of glove material, |glove thickness, dexterity. Always seek advice from |glove suppliers. Contaminated gloves should be |replaced. Chemical-resistant clothing is recommended |to avoid prolonged contact. Avoid unnecessary skin |contact. Respiratory Protection |If engineering controls do not maintain airborne |concentrations to a level which is adequate to |protect worker, a respiratory protection program |that meets or is equivalent to OSHA 29 CFR 1910.134 |and ANSI Z88.2 should be followed. Check with |respiratory protective equipment suppliers. Where |air-filtering respirators are suitable, select an |appropriate combination of mask and filter. Select a |filter suitable for combined particulate/organic |gases and vapors. |When spraying more than one half can continuously or |more than one can consecutively, use NIOSH approved |respirator. |Chemical Name |OSHA |TWA |(ppm) |OSHA |TWA |(mg/m3) |OSHA |STEL |(ppm) |OSHA |STEL |(mg/m3) |OSHATables- |Z1,2,3 |OSHA |Carcinogen |OSHA |Skin |designation |NIOSH |TWA |(ppm) |NIOSH |TWA |(mg/m3) |NIOSH |STEL |(ppm) |NIOSH |STEL |(mg/m3) |NIOSH |Carcinogen | |BUTANE | | | | | | | |800 |1900 | | | | |PROPANE |1000 |1800 | | |1 | | |1000 |1800 | | | | | |Chemical Name |ACGIH |TWA |(ppm) |ACGIH |TWA |(mg/m3) |ACGIH |STEL |(ppm) |ACGIH |STEL |(mg/m3) | |BUTANE |1000 | | | | |PROPANE |See Appendix F: Minimal Oxygen Content | | | | Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |N.A. Odor | Odor Threshold |N.A. pH |N.A. Relative Evaporation Rate |Slower than ether (butylacetate=1) | Melting Point |N.A. Freezing Point |N.A. Boiling Point | Flash Point |N.A. Auto-ignition Temperature |N.A Decomposition Temperature | Flammability (solid, gas) |Flashpoint below 73 Â°F Vapor Pressure |N.A. Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity | Solubility |N.A. Partition coefficient: | n-octanol/water | Viscosity |N.A. Lower Flammable Limit |N.A. Upper Flammable Limit |N.A. 9.2. Other Information Density: 6.51770 lb/gal Density VOC: 0.84730 lb/gal % VOC: 13.00000% VOC Actual: 0.84730 lb/gal VOC Actual: 101.53214 g/l VOC Regulatory: 0.84730 lb/gal VOC Regulatory: 101.53214 g/l SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable. 10.3 Possibility of Hazardous Reactions Will not occur. 10.4 Conditions to Avoid High temperatures. 10.5 Incompatible Materials None known. 10.6 Hazardous Decomposition Products In fire, will decompose to carbon dioxide, carbon monoxide. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Inhalation: effect of overexposure include irritation of respiratory tract, headache, dizziness, nausea, and loss of coordination. Extreme overexposure may result in unconsciousness and possibly death. Skin Corrosion/Irritation: Overexposure will cause defatting of skin. Serious Eye Damage/Irritation: Eye irritant. Overexposure will cause redness and burning sensation. Respiratory or Skin Sensitization: No data available. Germ Cell Mutagenicity: No data available. Carcinogenicity: No data available. Reproductive Toxicity: No data available. Specific Target Organ Toxicity (Single Exposure): No data available. Specific Target Organ Toxicity (Repeated Exposure): No data available. Aspiration Hazard: Aspiration hazard if swallowed. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity No data available. 12.2. Persistence and Degradability No data available. 12.3. Bioaccumulative Potential No data available. 12.4. Mobility in Soil No data available. 12.5. Other Adverse Effects No data available. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Under RCRA, it is the responsibility of the user of the product, to determine a the time of disposal whether the product meets RCRA criteria for hazardous waste. Waste management should be in full compliance with federal, state, and local laws. Empty containers retain product residue which may exhibit hazards of material, therefore do not pressurize, cut, glaze, weld or use for any other purposes. Return drums to reclamation centers for proper cleaning and reuse. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Consumer Commodity Hazard Class |ORM-D |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Consumer Commodity Hazard Class |ORM-D Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Consumer Commodity Identification Number| |<PICTOGRAM PHRASE> Hazard Class |ORM-D | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations CAS Chemical Name % By Weight Regulation List 0000074-98-6 PROPANE 5% - 11% SARA312,VOC,TSCA,ACGIH,OSHA 0000106-97-8 BUTANE 2% - 4% SARA312,VOC,TSCA,ACGIH 0008042-47-5 MINERAL OIL, SLAB OIL 51% - 90% SARA312,TSCA 0067784-80-9 Soybean oil, Me ester 5% - 10% SARA312,TSCA SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |CAS Chemical Name |% By Weight Regulation List | |0000074-98-6 PROPANE |5% - 11% TSCA | |0000106-97-8 BUTANE |2% - 4% TSCA | |0008042-47-5 MINERAL OIL, |51% - 90% TSCA |SLAB OIL | |0067784-80-9 Soybean oil, |5% - 10% TSCA |Me ester 15.2 US State Regulations <COMPONENT> SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |Feb 11, 2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.