Product Categories See All
Track Order Status
SDS Sheet 0066660Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Service Pro Hi-Temp Grease CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Lubricant. 1.3. Name, Address, and Telephone of the Responsible Party Company AIOD P.O. Box 1861 Montrose, CO 81402-1861 Phone: 1-800-428-9284, 970-249-6336 1.4. Emergency Telephone Number Emergency | 1-800-428-9284, Chemtrec 1-800-424-9300 (North America) number |1-703-527-3887 (International) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Skin |Category 2 corrosion/irri| tation | Serious eye |Category 2 damage/eye | irritation | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Exclamation Mark Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |Causes skin irritation |Causes serious eye irritation Precautionary Statements |Prevention: (GHS-US) |Wash face, hands and any exposed skin thoroughly |after handling |Wear eye/face protection |Response: |IF IN EYES: Rinse cautiously with water for several |minutes. Remove contact lenses, if present and easy |to do. Continue rinsing |I f eye irritation persists: Get medical |advice/attention |IF ON SKIN: Wash with plenty of soap and water |Take off contaminated clothing and wash it before |reuse |I f skin irritation occurs: Get medical |advice/attention |Disposal: |Dispose of contents/container to an approved waste |disposal plant 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) 2 .27% of the mixture consists of ingredient(s) of unknown toxicity SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Severely Hydrotreated Heavy |64742-52-5 |60-70 | Naphthenic | | | Petroleum Oil | | | Residual oils (petroleum), |64742-01-4 |1-10 | solvent refined | | | Antimony diamyldithiocarbamate |15890-25-2 |1-10 | Lithium Hydroxide Solution |1310-66-3 |1-10 | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: If exposed or concerned: Get medical advice/attention. Take proper precautions to ensure your own health and safety before attempting rescue or providing first aid. First-aid Measures After Inhalation: Vaporization is not expected at ambient temperatures. This material is not expected to cause inhalation-related disorders under anticipated conditions of use. In case of overexposure, move the person to fresh air. First-aid Measures After Skin Contact: If burned by hot material, cool skin by quenching with large amounts of cool water. For contact with product at ambient temperatures, remove contaminated shoes and clothing. Wipe off excess material. Wash exposed skin with mild soap and water. Seek medical attention if tissue appears damaged or if pain or irritation persists. Thoroughly clean contaminated clothing before reuse. Clean or discard contaminated leather goods. If material is injected under the skin, seek medical attention immediately. First-aid Measures After Eye Contact: Check for and remove contact lenses. Flush eyes with cool, clean, low-pressure water while occasionally lifting and lowering eyelids. Seek medical attention if excessive tearing, redness or pain persists. First-aid Measures After Ingestion: Do not induce vomiting unless directed to by a physician. Rinse out mouth with water. Never give anything by mouth to a person who is not fully conscious. Allow small quantities to pass through the digestive system. If large amounts are swallowed or irritation of discomfort, seek medical attention immediately. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Causes skin irritation. Symptoms/Injuries After Eye Contact: Causes serious eye irritation. Symptoms/Injuries After Ingestion: May be harmful if swallowed. Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Notes to Physician: Skin: In the event of injection in underlying tissue, immediate treatment should include extensive incision, debridement and saline irrigation. Inadequate treatment can result in ischemia and gangrene. Early symptoms may be minimal. Ingestion: Check for possible bowel obstruction with ingestion of large quantities of material. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use dry chemical, foam, carbon dioxide or water fog. Unsuitable Extinguishing Media: Not determined. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Water or foam may cause frothing. Molten material can form flaming droplets if ignited. Use of water on product above 100Â°C (212Â°F) can cause product to expand with explosive force. Explosion Hazard: Carbon dioxide, carbon monoxide, smoke, fumes, unburned hydrocarbons and oxides of sulfur, phosphorus, zinc and/ or nitrogen. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Carbon dioxide and inert gas can displace oxygen. Use caution when applying carbon dioxide or inert gas in confined spaces. Fight the fire from a safe distance in a protected location. Open any masses with a water stream to prevent reignition due to smoldering. Cool surface with water fog. Do not allow liquid runoff to enter sewers or public waters. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Take proper precautions to ensure your own health and safety before attempting spill control or clean-up. For more specific information, refer to section 8. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Slipping hazard; do not walk through spilled material. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Prevent further leakage or spillage if safe to do so. Prevent entry into waterways, sewer, basements or confined areas. Methods for Cleaning Up: For small spills, absorb or cover with dry earth, sand or other inert non-combustible absorbent material and place into waste containers for lateral disposal. Contain large spills to maximize product recovery or disposal. In urban areas, clean up spill as soon as possible. In natural environments, seek clean up advice from specialists to minimize physical habitat damage. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: If this product is stored or applied in high-pressure systems such as grease guns or hydraulic lines, there is the potential for accidental injection into the skin and underlying tissues. Empty containers may contain product residue that can ignite with explosive force. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep containers tightly closed in a dry, cool and well-ventilated place. Incompatible Materials: Strong oxidizing agents. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Exposure Guidelines Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Severely Hydrotreated Heavy Naphthenic Petroleum Oil 64742-52-5 TWA: 5 mg/m3 (oil mist) STEL: 10 mg/m3 (oil mist) TWA: 5mg/m3 (oil mist) STEL: none estab. TWA: none estab. STEL: none estab. Antimony diamyldithiocarbamate 15890-25-2 TWA: 0.5 mg/m3 Sb TWA: 0.5 mg/m3 Sb (vacated) TWA: 0.5 mg/m3 Sb IDLH: 50 mg/m3 Sb TWA: 0.5 mg/m3 Sb Barium Sulfonate 25619-56-1 TWA: 0.5 mg/m3 Ba TWA: 0.5 mg/m3 Ba (vacated) TWA: 0.5 mg/m3 Ba TWA: 0.5 mg/m3 except Barium sulfate Ba 8.2. Exposure Controls Appropriate Engineering |Provide exhaust ventilation or other engineering Controls |controls to keep the airborne |concentrations of vapors below their respective |threshold limit value. Ensure that eyewash stations |and safety showers are proximal to the work-station |location. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |Wear safety glasses with side shields (or goggles). Skin and Body Protection |Chemical resistant, impermeable gloves. Long sleeve |shirt and long pants. Aprons. Wear a lab coat. Respiratory Protection |Ensure adequate ventilation, especially in confined |areas. In case of inadequate ventilation or risk of |inhalation of vapors, use suitable respiratory |equipment. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Semi-solid to solid Appearance |Red semi-solid to solid Odor |Mild petroleum Odor Threshold |Not determined pH |Not available Relative Evaporation Rate |Not available (butylacetate=1) | Melting Point |Not available Freezing Point |Not available Boiling Point |Not available Flash Point |150 Â°C / 302 Â°F Open cup Auto-ignition Temperature |Not available Decomposition Temperature |Not determined Flammability (solid, gas) |Not determined Vapor Pressure |<01001 kPA (<0.01 mm Hg)(at 20Â°C) Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity |0.93 ( Water = 1) Solubility |Negligible Partition coefficient: |Not determined n-octanol/water | Viscosity | Lower Flammable Limit |Not available Upper Flammable Limit |Not available 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity N ot reactive under normal conditions. 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions None under normal processing. 10.4 Conditions to Avoid Keep away from extreme heat, sparks, open flame and incompatible materials. 10.5 Incompatible Materials Strong oxidizing agents. 10.6 Hazardous Decomposition Products Carbon dioxide, carbon monoxide, smoke, fumes, unburned hydrocarbons and oxides of sulfur, phosphorus, zinc and/ or nitrogen. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Skin Corrosion/Irritation: Causes skin irritation. Serious Eye Damage/Irritation: Causes serious eye irritation. Respiratory or Skin Sensitization: Do not inhale. Germ Cell Mutagenicity: Carcinogenicity: This product does not contain any carcinogens or potential carcinogens as listed by OSHA, IARC or NTP. Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: May be harmful if swallowed. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Ecotoxicity: The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Component Information Chemical Name Algae/aquatic plants Fish Toxicity to microorganisms Crustacea Severely Hydrotreated Heavy Naphthenic Petroleum Oil 64742-52-5 5000: 96 h Oncorhynchus mykiss mg/L LC50 1000: 48 h Daphnia magna mg/L EC50 Lubricating oils (petroleum), hydrotreated spent 64742-58-1 79.6: 96 h Brachydanio rerio mg/L LC50 semi-static 3.2: 96 h Pimephales promelas mg/L LC50 semi-static Residual oils (petroleum), solvent refined 64742-01-4 5000: 96 h Oncorhynchus mykiss mg/L LC50 1000: 48 h Daphnia magna mg/L EC50 12.2. Persistence and Degradability Not determined 12.3. Bioaccumulative Potential Not determined 12.4. Mobility in Soil Not determined 12.5. Other Adverse Effects Not determined SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Disposal should be in accordance with applicable regional, national and local laws and regulations. Additional Information: Contaminated Packaging Disposal should be in accordance with applicable regional, national and local laws and regulations. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> CERCLA: This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). SARA 313: Chemical Name CAS No Weight-% SARA 313 - Threshold Values % Antimony diamyldithiocarbamate - 15890-25-2 15890-25-2 2.25 1.0 CWA (Clean Water Act) Chemical Name CWA - Reportable Quantities CWA - Toxic Pollutants CWA - Priority Pollutants CWA - Hazardous Substances Antimony diamyldithiocarbamate X SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) |Chemical Name |TSCA | |Severely Hydrotreated |Heavy Naphthenic |Petroleum Oil |Present | |Residual oils (petroleum), |solvent refined |Present | |Antimony |diamyldithiocarbamate |Present | |Lithium Hydroxide Solution | | 15.2 US State Regulations <COMPONENT> California Proposition 65 This product does not contain any Proposition 65 chemicals. U.S. State Right-to-Know Regulations Chemical Name New Jersey Massachusetts Pennsylvania Antimony diamyldithiocarbamate 15890-25-2 X X Lithium Hydroxide Solution 1310-66-3 X Barium Sulfonate 25619-56-1 X X SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |24-Jul-2014 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.