Product Categories See All
Track Order Status
SDS Sheet 0066300Printer Friendly View
Safety Data Sheet Date of Issue: 05/13/2015 |Revision Date: 05/13/2015 |Revision Number: 00 Imperial Supplies Part Number: 0066300 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: UltraLube - Moly EP Grease CAS No: Mixture Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Shortened Product name: UL Grease Moly EP 1.3. Name, Address, and Telephone of the Responsible Party Company Plews & Edelmann 1550 Franklin Grove Rd. Dixon, IL 61021 Phone: 800-545-1689 1.4. Emergency Telephone Number Emergency | CHEMTREC: (800) 824-9300 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Ex. Compressed|H280 gas | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) |Not Classified as a health hazard. Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: Environmental hazards: Not classified as an environmental hazard. Label Elements: Label in accordance with (EC) no. 1272/2008 No pictogram required Other Hazards: Not classified as PBT/vPvB by current EU criteria. 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Vegetable Oil |68956-68-3 |[75-85%]| Lithium 12-hydroxystearate |7620-77-1 |[0-10%] | Molybdenum Sulfide |1317-33-5 |[0-5%] | TBHQ |1948-33-0 |[0-5%] | Total Non-Hazardous Ingredients | |100% | Composition comments: The full text for all R-phrases is displayed in Section 16. All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: Get medical attention if any discomfort develops. First-aid Measures After Inhalation: Move to fresh air. Call a physician if symptoms develop or persist. First-aid Measures After Skin Contact: Remove contaminated clothes and rinse skin thoroughly with water for at least 15 minutes. In case of rashes, wounds or other skin disorders: Seek medical attention and bring along these instructions. First-aid Measures After Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. Remove any contact lenses and open eyes wide apart. Get medical attention if irritation develops or persists. First-aid Measures After Ingestion: Drink 1 or 2 glasses of water. Get medical attention if any discomfort continues. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Irritant effects. Irritation of eyes and mucous membranes. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Prolonged or repeated contact with skin may cause redness, itching, irritation, eczema/chapping and oil acne. Symptoms/Injuries After Eye Contact: Symptoms include itching, burning, redness, and tearing of eyes. Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed General advice: Get medical attention if any discomfort develops. Notes to physician: Treat symptomatically. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Dry chemical, foam, carbon dioxide. Unsuitable Extinguishing Media: Do not use water jet as an extinguisher, as this will spread the fire. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Specific hazards: Thermal decomposition may produce smoke, oxides of carbon and lower molecular weight organic compounds whose composition have not been characterized. Explosion Hazard: May form vapors or oil mists during mechanical action or at elevated temperatures which may be irritating to the respiratory tract. Excessive inhalation of oil mist may affect respiratory system. Dermatitis after prolonged exposure. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Special protective equipment for fire-fighters: Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Selection of respiratory protection for firefighting: follow the general fire precautions indicated in the workplace. Firefighting Instructions: Move containers from fire area if you can do it without risk. Use water spray to cool unopened containers. Cool containers with flooding quantities of water until well after fire is out. Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: When working with heated grease, mechanical ventilation may be required. Remove sources of ignition. Avoid contact with skin and eyes. For personal protection, see Section 8. In case of spills, beware of slippery floors and surfaces. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Do not allow to enter drains, sewers or watercourses. Collect and dispose of spillage as indicated in Section 13. Contact local authorities in case of spillage to drain/aquatic environment. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Small Spills: Absorb spillage with oil-absorbing material. Large Spills: Absorb spilled substance with sand or earth. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Handle and open container with care. Wear appropriate personal protective equipment. Avoid prolonged and repeated contact with grease, particularly used grease. Always remove grease with soap and water or skin cleaning agent, never use organic solvents. Use work methods which minimize production of vapors and mists. Observe good industrial hygiene practices. Hygiene Measures: Handle in accordance with good industrial hygiene and safety practices. Wash hands after handling. Launder contaminated clothing before reuse. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Keep away from heat, sparks and open flame. Store in a cool and well-ventilated place. Store away from incompatible materials. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Occupational exposure limits: No exposure limits noted for ingredient(s). 8.2. Exposure Controls Appropriate Engineering |Provide adequate ventilation. When working with Controls |heated oil, mechanical ventilation may be required. |Provide access to washing facilities including soap, |skin cleanser and fatty cream. |Environmental exposure Controls: Contain spills and |prevent releases and observe national regulations on |emissions. Personal Protective Equipment|General: Use personal protective equipment as |required. Personal protective equipment should be |chosen according to the CEN standards and in |discussion with the supplier of the personal |protective equipment. Materials for Protective | Clothing | Hand Protection |Wear protective gloves. Nitrile gloves are |recommended. Suitable gloves can be recommended by |the glove supplier. Eye Protection |If risk of splashing, wear safety goggles or face |shield. Skin and Body Protection |Wear suitable protective clothing. Frequent change |of gloves is advisable. Respiratory Protection |In case of inadequate ventilation or risk of |inhalation of dust, use suitable respiratory |equipment with particle filter (type P2). Seek |advice from local supervisor. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Semi Solid Appearance |Grease Odor |Characteristic vegetable oil Odor Threshold |Not available pH |Not available Relative Evaporation Rate |< 1 (n-Butylacetate = 1) (butylacetate=1) | Melting Point |Not available Freezing Point |Not available Boiling Point |Not available Flash Point |NA Auto-ignition Temperature |Not available Decomposition Temperature | Flammability (solid, gas) |Not available Vapor Pressure |< 0.5 mm Hg at 20 Â°C Relative Vapor Density at 20 Â°C |> 1 (Air = 1) Relative Density |0.92 Specific Gravity | Solubility |Practically insoluble Partition coefficient: |Not available n-octanol/water | Viscosity |Not available Lower Flammable Limit |Not available Upper Flammable Limit |Not available 9.2. Other Information VOC: 0 % SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable at normal conditions. 10.3 Possibility of Hazardous Reactions 10.4 Conditions to Avoid High temperatures, Exposure to light, Contact with incompatible materials. Materials to avoid: Strong oxidizing agents. 10.5 Incompatible Materials Strong oxidizing agents. 10.6 Hazardous Decomposition Products At thermal decomposition temperatures, carbon monoxide and carbon dioxide. Nitrogen oxides. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: May form vapors or oil mists during mechanical action or at elevated temperatures which may be irritating to the respiratory tract. Excessive inhalation of oil mist may affect respiratory system. Causes skin and eye irritation. Swallowing may cause gastrointestinal irritation. Chronic toxicity: Degreasing. Prolonged or frequent contact may cause redness, itching and eczema/chaps. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: The product contains a small amount of sensitizing substance which may provoke an allergic reaction among sensitive individuals. Germ Cell Mutagenicity: No test data available for the product. Carcinogenicity: No carcinogenicity data available for this product. Reproductive Toxicity: No test data available for the product. Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Inhalation. Symptoms/Injuries After Skin Contact: Skin contact. Symptoms/Injuries After Eye Contact: Eye contact. Symptoms/Injuries After Ingestion: Chronic Symptoms: Epidemiology: No epidemiological data is available for this product. Local effects: Irritating to eyes and skin. May cause redness and pain. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Ecotoxicity: Biobased greases are generally non-hazardous to the environment. 12.2. Persistence and Degradability No data available. 12.3. Bioaccumulative Potential No data available. 12.4. Mobility in Soil The product is immiscible with water and will spread on the water surface. 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Dispose in accordance with all applicable regulations. Additional Information: Dispose of in accordance with local regulations. EU wastecodes: 20 01 26* SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name | Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated as dangerous goods. Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated as dangerous goods. Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) | 15.2 US State Regulations <COMPONENT> Other regulations: This Safety Data Sheet complies with the requirements of Regulation (EC) No 1907/2006 as amended. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |05/13/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.