Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status
Order No:
Zip Code:

SDS Sheet 0066270

Printer Friendly View
        

Safety Data Sheet                                                                 
Date of Issue:             |Revision Date: JUNE 26,    |Revision Number: 4        
                           |2014                       |                          
Imperial Supplies Part Number: 0066270                                            

SECTION 1: IDENTIFICATION                                                         


1.1.  Product Identifier
Product Form:                                                                     
Product Name: Delo Heavy Duty EP 1, 2                                             
CAS No:                                                                           
Synonyms:                                                                         


1.2.  Intended Use of the Product
Use of the substance/mixture: Grease                                              


1.3.  Name, Address, and Telephone of the Responsible Party
Company                                                                           
Chevron Products Company                                                          
a division of Chevron U.S.A. Inc.                                                 
6001 Bollinger Canyon Rd.                                                         
San Ramon, CA 94583                                                               
United States of America                                                          
Phone: 1 (800) 582-3835                                                           


1.4.  Emergency Telephone Number
Emergency     |Transportation Emergency Response: CHEMTREC: (800) 424-9300 or     
number        |(703) 527-3887                                                     
              |Health Emergency: Chevron Emergency Information Center: Located in 
              |the USA. International collect calls accepted. (800) 231-0623 or   
              |(510) 231-0623                                                     

SECTION 2: HAZARDS IDENTIFICATION                                                 


2.1.  Classification of the Substance or Mixture
Classification (GHS-US)
Acute aquatic |Category 3    
toxicant      |              
Chronic       |Category 3    
aquatic       |              
toxicant      |              
              |              


2.2.  Label Elements
GHS-US Labeling
Hazard Pictograms (GHS-US)   |        |        |        |        |        |        
Signal Word (GHS-US)         |                                                    
Hazard Statements (GHS-US)   |                                                    
Precautionary Statements     |Prevention:                                         
(GHS-US)                     |Avoid release to the environment.                   
                             |Disposal:                                           
                             |Dispose of contents/container in accordance with    
                             |applicable local/regional/national/international    
                             |regulations.                                        


2.3.  Other Hazards
Other Hazards Not Contributing to the Classification:                             


2.4.  Unknown Acute Toxicity (GHS-US)
                                                                                  

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS                                 


3.1.  Substance
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  
                                |                     |        |                  


Full text of H-phrases: See Section 16
3.2.  Mixture
Name                            |Product identifier   |%       |Classification    
                                |                     |        |(GHS-US)          
Highly refined mineral oil (C15 |Mixture              |70 - 99 |                  
- C50)                          |                     |%wt/wt  |                  
Distillates, hydrotreated middle|64742-46-7           |10 - 30 |                  
                                |                     |%weight |                  
Zinc dialkyldithiophosphate     |68649-42-3           |1 - 5   |                  
                                |                     |%wt/wt  |                  
Phosphoric acid ester amine salt|Mixture              |0.1 - 1 |                  
                                |                     |%weight |                  
                                |                     |        |                  


SECTION 4: FIRST AID MEASURES                                                     


4.1.  Description of First Aid Measures
First-aid Measures General:                                                       
First-aid Measures After Inhalation: No specific first aid measures are required. 
If exposed to excessive levels of material in the air, move the exposed person to 
fresh air. Get medical attention if coughing or respiratory discomfort occurs.    
First-aid Measures After Skin Contact: No specific first aid measures are         
required. As a precaution, remove clothing and shoes if contaminated. To remove   
the material from skin, use soap and water. Discard contaminated clothing and     
shoes or thoroughly clean before reuse.                                           
First-aid Measures After Eye Contact: No specific first aid measures are required.
As a precaution, remove contact lenses, if worn, and flush eyes with water.       
First-aid Measures After Ingestion: No specific first aid measures are required.  
Do not induce vomiting. As a precaution, get                                      
medical advice.                                                                   


4.2.  Most important symptoms and effects, both acute and delayed
Symptoms/Injuries:                                                                
Symptoms/Injuries After Inhalation: Not expected to be harmful if inhaled.        
Contains a petroleum-based mineral oil. May cause                                 
respiratory irritation or other pulmonary effects following prolonged or repeated 
inhalation of oil mist at airborne levels above the recommended mineral oil mist  
exposure limit. Symptoms of respiratory irritation may include coughing and       
difficulty breathing.                                                             
Symptoms/Injuries After Skin Contact: Contact with the skin is not expected to    
cause prolonged or significant irritation. Contact with the skin is not expected  
to cause an allergic skin response. Not expected to be harmful to internal organs 
if absorbed through the skin. High-Pressure Equipment Information: Accidental     
high-velocity injection under the skin of materials of this type may result in    
serious injury. Seek medical attention at once should an accident like this occur.
The initial wound at the injection site may not appear to be serious at first;    
but, if left untreated, could result in disfigurement or amputation of the        
affected part.                                                                    
Symptoms/Injuries After Eye Contact: Not expected to cause prolonged or           
significant eye irritation.                                                       
Symptoms/Injuries After Ingestion: Not expected to be harmful if swallowed.       
Chronic Symptoms:                                                                 


4.3.  Indication of Any Immediate Medical Attention and Special Treatment
Needed
Note to Physicians: In an accident involving high-pressure equipment, this product
may be injected under the skin. Such an accident may result in a small, sometimes 
bloodless, puncture wound. However, because of its driving force, material        
injected into a fingertip can be deposited into the palm of the hand. Within 24   
hours, there is usually a great deal of swelling, discoloration, and intense      
throbbing pain. Immediate treatment at a surgical emergency center is recommended.

SECTION 5: FIRE-FIGHTING MEASURES                                                 

5.1.  Extinguishing Media
Suitable Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide 
(CO2) to extinguish flames.                                                       
Unsuitable Extinguishing Media:                                                   


5.2.  Special Hazards Arising From the Substance or Mixture
Fire Hazard: Combustion Products: Highly dependent on combustion conditions. A    
complex mixture of airborne solids, liquids, and gases including carbon monoxide, 
carbon dioxide, and unidentified organic compounds will be evolved when this      
material undergoes combustion.                                                    
Explosion Hazard:                                                                 
Reactivity:                                                                       


5.3.  Advice for Firefighters
Precautionary Measures Fire:                                                      
Firefighting Instructions: This material will burn although it is not easily      
ignited. See Section 7 for proper handling and storage. For fires involving this  
material, do not enter any enclosed or confined fire space without proper         
protective equipment, including self-contained breathing apparatus.               
Protection During Firefighting:                                                   

SECTION 6: ACCIDENTAL RELEASE MEASURES                                            


6.1.  Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Eliminate all sources of ignition in vicinity of spilled        
material.                                                                         


6.1.1.      For Non-emergency Personnel
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.1.2.      For Emergency Responders
Protective Equipment:                                                             
Emergency Procedures:                                                             


6.2.  Environmental Precautions
                                                                                  


6.3.  Methods and Material for Containment and Cleaning Up
For Containment:                                                                  
Methods for Cleaning Up:  Spill Management: Clean up spills immediately, observing
precautions in Exposure Controls/Personal                                         
Protection section. Stop the source of the release if you can do it without risk. 
Contain release to prevent further contamination of soil, surface water or        
groundwater. Clean up spill as soon as possible, observing precautions in Exposure
Controls/Personal Protection. Use appropriate techniques such as applying         
non-combustible absorbent materials or pumping. Where feasible and appropriate,   
remove contaminated soil. Place contaminated materials in disposable containers   
and dispose of in a manner consistent with applicable regulations.                
Reporting: Report spills to local authorities as appropriate or required.         


6.4.  Reference to Other Sections
See heading  8, Exposure Controls and Personal Protection.                        


SECTION 7: HANDLING AND STORAGE                                                   


7.1.  Precautions for Safe Handling
Additional Hazards When Processed: Keep out of the reach of children.             
General Handling Information: Avoid contaminating soil or releasing this material 
into sewage and drainage systems and bodies of water.                             
Hygiene Measures:                                                                 


7.2.  Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:                                                               
Static Hazard: Electrostatic charge may accumulate and create a hazardous         
condition when handling this material. To minimize this hazard, bonding and       
grounding may be necessary but may not, by themselves, be sufficient. Review all  
operations which have the potential of generating and accumulating an             
electrostatic charge and/or a flammable atmosphere (including tank and container  
filling, splash filling, tank cleaning, sampling, gauging, switch loading,        
filtering, mixing, agitation, and vacuum truck operations) and use appropriate    
mitigating procedures. For more information, refer to OSHA Standard 29 CFR        
1910.106, 'Flammable and Combustible Liquids', National Fire Protection           
Association (NFPA 77, 'Recommended Practice on Static Electricity', and/or the    
American Petroleum Institute (API) Recommended Practice 2003, 'Protection Against 
Ignitions Arising Out of Static, Lightning, and Stray Currents'.                  
Container Warnings: Container is not designed to contain pressure. Do not use     
pressure to empty container or it may rupture with explosive force. Empty         
containers retain product residue (solid, liquid, and/or vapor) and can be        
dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose   
such containers to heat, flame, sparks, static electricity, or other sources of   
ignition. They may explode and cause injury or death. Empty containers should be  
completely drained, properly closed, and promptly returned to a drum reconditioner
or disposed of properly.                                                          
Storage Conditions:                                                               


7.3.  Specific End Use(s)
                                                                                  

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION                                  


8.1.  Control Parameters
Occupational Exposure Limits:                                                     
Component                                                                         
Agency                                                                            
TWA                                                                               
STEL                                                                              
Ceiling                                                                           
Notation                                                                          
                                                                                  
Highly refined mineral oil (C15 -                                                 
C50)                                                                              
ACGIH                                                                             
5 mg/m3                                                                           
10 mg/m3                                                                          
-                                                                                 
-                                                                                 
                                                                                  
Highly refined mineral oil (C15 -                                                 
C50)                                                                              
OSHA Z-1                                                                          
5 mg/m3                                                                           
-                                                                                 
-                                                                                 
-                                                                                 
                                                                                  
Consult local authorities for appropriate values.                                 


8.2.  Exposure Controls
Appropriate Engineering      |Use in a well-ventilated area.                      
Controls                     |GENERAL CONSIDERATIONS: Consider the potential      
                             |hazards of this material (see Section 3), applicable
                             |exposure limits, job activities, and other          
                             |substances in the work place when designing         
                             |engineering controls and selecting personal         
                             |protective equipment. If engineering controls or    
                             |work practices are not adequate to prevent exposure 
                             |to harmful levels of this material, the personal    
                             |protective equipment listed below is recommended.   
                             |The user should read and understand all instructions
                             |and limitations supplied with the equipment since   
                             |protection is usually provided for a limited time or
                             |under certain circumstances.                        
Personal Protective Equipment|                                                    
Materials for Protective     |                                                    
Clothing                     |                                                    
Hand Protection              |                                                    
Eye Protection               |No special eye protection is normally required.     
                             |Where splashing is possible, wear                   
                             |safety glasses with side shields as a good safety   
                             |practice.                                           
Skin and Body Protection     |No special protective clothing is normally required.
                             |Where splashing is possible, select protective      
                             |clothing depending on operations conducted, physical
                             |requirements and other substances in the workplace. 
                             |Suggested materials for protective gloves include:  
                             |Neoprene, Nitrile Rubber, Silver Shield, Viton.     
Respiratory Protection       |No respiratory protection is normally required. If  
                             |user operations generate an oil mist, determine if  
                             |airborne concentrations are below the occupational  
                             |exposure limit for mineral oil mist. If not, wear an
                             |approved respirator that provides adequate          
                             |protection from the measured concentrations of this 
                             |material. For air-purifying respirators use a       
                             |particulate cartridge. Use a positive pressure      
                             |air-supplying respirator in circumstances where     
                             |air-purifying respirators may not                   
                             |provide adequate protection.                        
Thermal Hazard Protection    |                                                    

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES                                       


9.1.  Information on Basic Physical and Chemical Properties
Physical State                      |Semi-solid                                   
Appearance                          |                                             
Odor                                |Petroleum odor                               
Odor Threshold                      |No data available                            
pH                                  |Not Applicable                               
Relative Evaporation Rate           |No data available                            
(butylacetate=1)                    |                                             
Melting Point                       |233°C (451.4°F) (Min)                        
Freezing Point                      |Not Applicable                               
Boiling Point                       |315°C (599°F) Minimum                        
Flash Point                         |274 °C (525 °F) (Estimated)                  
Auto-ignition Temperature           |No data available                            
Decomposition Temperature           |No Data Available                            
Flammability (solid, gas)           |No Data Available                            
Vapor Pressure                      |<0.01 mmHg Maximum @ 37.8 °C (100 °F)        
Relative Vapor Density at 20 °C     |>1 Minimum                                   
Relative Density                    |                                             
Specific Gravity                    |1 g/ml                                       
Solubility                          |Soluble in hydrocarbon solvents; insoluble in
                                    |water.                                       
Partition coefficient:              |No data available                            
n-octanol/water                     |                                             
Viscosity                           |22 mm2/s @ 100°C (212°F) Minimum             
Lower Flammable Limit               |Not Applicable                               
Upper Flammable Limit               |Not Applicable                               


9.2.  Other Information
                                                                                  

SECTION 10: STABILITY AND REACTIVITY                                              


10.1      Reactivity
This material is not expected to react.                                           


10.2      Chemical Stability
This material is considered stable under normal ambient and anticipated storage   
and handling conditions of temperature and pressure.                              


10.3      Possibility of Hazardous Reactions
Hazardous Polymerization: Hazardous polymerization will not occur.                


10.4      Conditions to Avoid
                                                                                  


10.5      Incompatible Materials
May react with strong acids or strong oxidizing agents, such as chlorates,        
nitrates, peroxides, etc.                                                         


10.6      Hazardous Decomposition Products
None known (None expected).                                                       

SECTION 11: TOXICOLOGICAL INFORMATION                                             


11.1. Information on Toxicological Effects
Acute Toxicity: Not Determined.                                                   
ADDITIONAL TOXICOLOGY INFORMATION: This product contains petroleum base oils which
may be refined by various processes including severe solvent extraction, severe   
hydrocracking, or severe hydrotreating. None of the oils requires a cancer warning
under the OSHA Hazard Communication Standard (29 CFR 1910.1200). These oils have  
not been listed in the National Toxicology Program (NTP) Annual Report nor have   
they been classified by the International Agency for Research on Cancer (IARC) as;
carcinogenic to humans (Group 1), probably carcinogenic to humans (Group 2A), or  
possibly carcinogenic to humans (Group 2B). These oils have not been classified by
the American Conference of Governmental Industrial Hygienists (ACGIH) as:         
confirmed human carcinogen (A1), suspected human carcinogen (A2), or confirmed    
animal carcinogen with unknown relevance to humans (A3).                          
Skin Corrosion/Irritation: The skin irritation hazard is based on evaluation of   
data for similar materials.                                                       
Serious Eye Damage/Irritation: The eye irritation hazard is based on evaluation of
data for similar materials.                                                       
Respiratory or Skin Sensitization: The skin sensitization hazard is based on      
evaluation of data for similar materials.                                         
Germ Cell Mutagenicity: The hazard evaluation is based on data for components or a
similar material.                                                                 
Carcinogenicity: The hazard evaluation is based on data for components or a       
similar material.                                                                 
Reproductive Toxicity: The hazard evaluation is based on data for components or a 
similar material.                                                                 
Specific Target Organ Toxicity (Single Exposure): The hazard evaluation is based  
on data for components or a similar material.                                     
Specific Target Organ Toxicity (Repeated Exposure): The hazard evaluation is based
on data for components or a similar material.                                     
Aspiration Hazard:                                                                
Symptoms/Injuries After Inhalation:                                               
Symptoms/Injuries After Skin Contact:                                             
Symptoms/Injuries After Eye Contact:                                              
Symptoms/Injuries After Ingestion:                                                
Chronic Symptoms:                                                                 

SECTION 12: ECOLOGICAL INFORMATION                                                


12.1. Toxicity
ECOTOXICITY: This material is expected to be harmful to aquatic organisms and may 
cause long-term adverse effects in the aquatic environment. The ecotoxicity hazard
is based on data for a similar material. The product has not been tested. The     
statement has been derived from the properties of the individual components.      


12.2. Persistence and Degradability
This material is not expected to be readily biodegradable. The biodegradability of
this material is based on data for the components. The product has not been       
tested. The statement has been derived from the properties of the individual      
components.                                                                       


12.3. Bioaccumulative Potential
Bioconcentration Factor: No data available.                                       
Octanol/Water Partition Coefficient: No data available.                           


12.4. Mobility in Soil
No data available.                                                                


12.5. Other Adverse Effects
                                                                                  

SECTION 13: DISPOSAL CONSIDERATIONS
13.1. Waste treatment methods
Waste Disposal Recommendations: Use material for its intended purpose or recycle  
if possible. Oil collection services are available for used oil recycling or      
disposal. Place contaminated materials in containers and dispose of in a manner   
consistent                                                                        
with applicable regulations. Contact your sales representative or local           
environmental or health authorities for approved disposal or recycling methods.   
Additional Information:                                                           

SECTION 14: TRANSPORT INFORMATION                                                 


14.1 In Accordance with DOT
Proper Shipping Name |NOT REGULATED AS A HAZARDOUS MATERIAL UNDER 49 CFR          
Hazard Class         |                       |<PICTOGRAM PHRASE>                  
Identification Number|                       |                                    
Label Codes          |                       |                                    
ERG Number           |                                                            


14.2 In Accordance with IMDG
Proper Shipping Name |NOT REGULATED AS DANGEROUS GOODS FOR TRANSPORT UNDER THE    
                     |IMDG CODE                                                   
Hazard Class         |                                                            
Identification Number|                                                            
Label Codes          |                      |<PICTOGRAM PHRASE>                   
ntification Of The   |                      |                                     
Substance/m          |                      |                                     
EmS-No. (Fire)       |                      |                                     
EmS-No. (Spillage)   |                      |                                     


14.3 In Accordance with IATA
Proper Shipping Name |NOT REGULATED AS DANGEROUS GOODS FOR TRANSPORT UNDER ICAO   
Identification Number|                       |<PICTOGRAM PHRASE>                   
Hazard Class         |                       |                                     
Label Codes          |                       |                                     
ntification Of The   |                       |                                     
Substance/m          |                       |                                     
ERG Code (IATA)      |                                                            

SECTION 15: REGULATORY INFORMATION                                                

15.1      US Federal Regulations
<COMPONENT>                                                                       
SARA Section 311/312 Hazard Classes |Immediate (Acute) Health Effects:            
                                    |NO                                           
                                    |Delayed (Chronic) Health Effects:            
                                    |NO                                           
                                    |Fire Hazard:                                 
                                    |NO                                           
                                    |Sudden Release of Pressure Hazard:           
                                    |NO                                           
                                    |Reactivity Hazard:                           
                                    |NO                                           
Toxic Substances Control Act (TSCA) |                                             

15.2      US State Regulations
<COMPONENT>                                                                       
The following components of this material are found on the regulatory lists       
indicated.                                                                        
Zinc dialkyldithiophosphate                   03, 06                              
                                                                                  
NEW JERSEY RTK CLASSIFICATION:                                                    
Under the New Jersey Right-to-Know Act L. 1983 Chapter 315 N.J.S.A. 34:5A-1 et.   
seq., the product is to be identified as follows: PETROLEUM OIL (Grease).         
                                                                                  

SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION     

Revision date   |JUNE 26, 2014                                                    
Other           |This document has been prepared in accordance with the SDS       
Information     |requirements of the OSHA Hazard Communication Standard 29 CFR    
                |1910.1200.                                                       
GHS Full Text Phrases:                                                            
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             
----|                               |                                             
--  |                               |                                             


Grainger disclaimer.
    

The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.

Feedback