Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status
Order No:
Zip Code:

MSDS Sheet 0066190

Printer Friendly View
        

                 MATERIAL SAFETY DATA SHEET

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:              HIGH FLASH SOLVENT DEGREASER
IDENTIFICATION NUMBER:     6619 & 6619-1
PRODUCT USE/CLASS:         SAFETY SOLVENT       DATE PRINTED:  05/02/08

MANUFACTURED FOR:          MANUFACTURED BY:
IMPERIAL SUPPLIES LLC      IMPERIAL SUPPLIES LLC
789 ARMED FORCES DRIVE     789 ARMED FORCES DRIVE
GREEN BAY  WI. 54304       GREEN BAY  WI. 54304

INFORMATION #:             EMERGENCY #:
800-558-2808               800-255-3924  CHEM-TEL

PREPARER: CUSTOMER SERVICE, PHONE: , PREPARE DATE: 05/02/08

SECTION 2 - COMPOSITION/INFORMATION ON  INGREDIENTS

                                                           WT/WT %
ITEM    CHEMICAL NAME                     CAS NUMBER       LESS THAN

01      Dimethyl-2-Methyl Glutarate       14035-94-0       100.0 %
02      CARBON DIOXIDE                    124-38-9         4.0 %

                               EXPOSURE LIMITS
            ACGIH                   OSHA                 COMPANY
ITEM  TLV-TWA    TLV-STEL    PEL-TWA    PEL-CEILING      TLV-TWA    SKIN

01    N.E.       N.E.        N.E.       N.E.       100 PPM    NO
02    5000 PPM   30000 PPM   5000 PPM   N.E.       N.E.       YES

(See Section 16 abbreviation legend)

SECTION 3 -  HAZARDS IDENTIFICATION

*** EMERGENCY OVERVIEW***:   Vapors irritating to eyes and respiratory tract.
High vapor concentrations may cause drowsiness.

EFFECTS OF OVEREXPOSURE - EYE CONTACT:   Liquid, aerosols and vapors of this
product are irritating and can cause pain, tearing, reddening and swelling
accompanied by a stinging sensation and/or a feeling like that of fine dust in
the eyes.

EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can
result in defatting and drying of the skin which may result in skin irritation
and dermatitis (rash).

EFFECTS OF OVEREXPOSURE - INHALATION:  Headaches, dizziness, nausea, decreased
blood pressure, changes in heart rate and cyanosis may result from over-exposure
to vapor or skin exposure. Prolonged inhalation may be harmful.

EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal if
swallowed.

EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Overexposure may cause nervous
system damage.

PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT  SKIN ABSORPTION  INHALATION  INGESTION
EYE CONTACT

SECTION 4 - FIRST AID MEASURES

FIRST AID - EYE CONTACT:  Immediately flush eyes with plenty of water. Get
medical attention, if irritation persists.

FIRST AID - SKIN CONTACT:  Immediately flush skin with plenty of water. Remove
clothing. Get medical attention immediately. Wash clothing separately before
reuse.

FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get immediate medical
attention.

FIRST AID - INGESTION:   Get medical attention immediately. If swallowed, do
NOT induce vomiting. Give victim a glass of water or milk. Call a physician or
poison control center immediately. Never give anything by mouth to an
unconscious person.

SECTION 5 - FIRE FIGHTING MEASURES

FLASH POINT:  208 F           LOWER EXPLOSIVE LIMIT:   N.A.
                              UPPER EXPLOSIVE LIMIT:   N.A.

AUTO IGNITION TEMPERATURE:  ND

EXTINGUISHING MEDIA:  CO2  DRY CHEMICAL  FOAM   WATER FOG

UNUSUAL FIRE AND EXPLOSION HAZARDS:  "Empty" containers retain product residue
(liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD,
BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS,
STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION: THEY MAY EXPLODE AND CAUSE
INJURY OR DEATH. Empty drums should be completely drained, properly bunged and
promptly returned to a drum reconditioner, or properly disposed of.

SPECIAL FIREFIGHTING PROCEDURES:  Containers can build up pressure if exposed
to heat (fire). As in any fire, wear self-contained breathing apparatus
pressure-demand (MSHA/NIOSH approved or equivalent)  and full protective gear.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill with
inert material (e.g. dry sand or earth), then place in a chemical waste
container. Avoid runoff storm sewers and ditches which lead to waterways.

SECTION 7 - HANDLING AND STORAGE

HANDLING:  Wash thoroughly after handling.

STORAGE:  Keep from freezing.

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS:  Local exhaust ventilation may be necessary to control
any air contaminants to within their TLVs during the use of this product.

RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA
1910.134 and ANSI Z88.2 requirements must be followed whenever workplace
conditions warrant a respirator's use.

SKIN PROTECTION:  No Information.

EYE PROTECTION:  Wear safety glasses with side shields (or goggles) and a face
shield.

OTHER PROTECTIVE EQUIPMENT:  STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE
FOLLOWED.

HYGIENIC PRACTICES:  Wash hands before eating. Remove contaminated  clothing
and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label
precautions even after container is emptied because they may retain product
residues. Avoid prolonged or repeated contact with skin. Avoid breathing vapors
from heated material. Avoid contact with eyes, skin, and clothing.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

BOILING RANGE:      453 - 455 F      VAPOR DENSITY:     Is heavier that air
ODOR:               SOLVENT          ODOR THRESHOLD:    ND
APPEARANCE:         CLEAR            EVAPORATION RATE:  Is faster than Butyl    
                                                        Acetate
SOLUBILITY IN H2O:  NEGLIGIBLE
FREEZE POINT:       -50 C            SPECIFIC GRAVITY:  1.0628
VAPOR PRESSURE:     ND               Ph @ 0.0 %:        NA
PHYSICAL STATE:     AEROSOL          VISCOSITY:         ND
COEFFICIENT OF WATER/OIL DISTRIBUTION:  2.2%

(See Section 16 for abbreviation legend)

SECTION 10 - STABILITY AND REACTIVITY

CONDITIONS TO AVOID:  ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES.

INCOMPATIBILITY:  STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES.

HAZARDOUS DECOMPOSITION PRODUCTS:  OXIDES OF CARBON, OXIDES OF NITROGEN, AND
MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE.

HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.

STABILITY:  This product is stable under normal storage conditions.

SECTION 11 - TOXICOLOGICAL PROPERTIES

PRODUCT LD50:  2000 mg/kg         PRODUCT LC50:  No Data

COMPONENT TOXICOLOGICAL INFORMATION:

      CHEMICAL NAME               LD50                  LC50
Dimethyl-2-Methyl Glutarate       >2000 MG/KG,  RAT     NO DATA
CARBON DIOXIDE                    NE                    NE
METHYL ALCOHOL                    5628 MG/KG/RAT        86000 MG/M3/HUMAN

SECTION 12 - ECOLOGICAL INFORMATION

ECOLOGICAL INFORMATION:  No Information.

SECTION 13 - DISPOSAL CONSIDERATIONS

DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL
REGULATIONS.

SECTION 14 - TRANSPORTATION INFORMATION

DOT PROPER SHIPPING NAME:  CONSUMER COMMODITY

DOT TECHNICAL NAME:  ORM-D

DOT HAZARD CLASS:            HAZARD SUBCLASS:

DOT UN/NA NUMBER:  UN1950         PACKING GROUP:         RESP. GUIDE PAGE:

SECTION 15 - REGULATORY INFORMATION

U.S. FEDERAL REGULATIONS:  AS FOLLOWS -

OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)

CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable
definitions, to meet the following categories:

IMMEDIATE HEALTH HAZARD  CHRONIC HEALTH HAZARD  FIRE HAZARD  PRESSURIZED  
GAS HAZARD

SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:

CHEMICAL NAME                      CAS NUMBER WT/WT      %     IS LESS THAN
Dimethyl-2-Methyl Glutarate        14035-94-0                       100.0 %

TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12 (B) if exported from the United States:

CHEMICAL NAME                      CAS NUMBER
Dimethyl-2-Methyl Glutarate        14035-94-0
METHYL ALCOHOL                     67-56-1

U.S. STATE REGULATIONS:  AS FOLLOWS -

NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:

CHEMICAL NAME                      CAS NUMBER
No non-hazardous materials are among the top five ingredients.

PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at greater
than 3%:

CHEMICAL NAME                      CAS NUMBER
No non-hazardous ingredients are present at greater than 3%.

CALIFORNIA PROPOSITION 65:

WARNING: The chemical(s) noted below and contained in this product, are known
to the state of California to cause cancer, birth defects or other reproductive
harm:

CHEMICAL NAME                      CAS NUMBER
No Proposition 65 chemicals exist in this product.

INTERNATIONAL REGULATIONS:  AS FOLLOWS  -

CANADIAN WHMIS:  This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.

CANADIAN WHMIS CLASS:  No information available.

SECTION 16 - OTHER INFORMATION

HMIS RATINGS  -  HEALTH: 1   FLAMMABILITY: 1    REACTIVITY:  0

PREVIOUS MSDS REVISION DATE:  05/02/08

REASON FOR REVISION:  NEW FORMULA

VOLATILE ORGANIC COMPOUNDS  (VOCS):  0.00 lbs/gal,       0 grams/ltr

LEGEND:     N.A. - Not Applicable,      N.E. - Not Established,
            N.D. - Not Determined


*** THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION ***
The information contained on this MSDS has been checked and should be accurate.
However, it is the responsibility of the user to comply with all Federal,
State, and Local laws and regulations.

<END OF MSDS>
    

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.

Feedback