Sheet 0065540Printer Friendly View
MATERIAL SAFETY DATA SHEET SECTION 1 - CHEMICAL PRODUCT AND COMPANY INDENTIFICATION PRODUCT NAME: 6554 BORON NITRIDE LUBRICANT IDENTIFICATION A-6281 F01947 DATE PRINTED: 08/31/10 NUMBER: PRODUCT USE/CLASS: DRY FILM LUBRICANT MANUFACTURED FOR: MANUFACTURED BY: IMPERIAL, INCORPORATED AMERICAN JETWAY CORPORATION 789 ARMED FORCES DRIVE 34136 MYRTLE STREET P.O. BOX 11008 WAYNE, MICHICAN 48184-0126 GREEN BAY, WISCONSIN 54307 PHONE: 920-494-7474 EMERGENCY TELEPHONE : 920-494-7474 EMERGENCY AGENCY: CHEMTREC MON-FRI/8:00 AM - 5:00 PM 1-800-424-9300 (24 HOURS) PREPARER: REGULATORY AFFAIRS, PHONE: , PREPARE DATE: 08/31/10 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS ITEM CHEMICAL NAME CAS NUMBER WEIGHT % 01 PROPANE/ISOBUTANE/N-BUTANE 68476-86-8 70-80 02 HEXANE 64742-49-0 20-30 03 2-PROPANONE 67-64-1 1-10 EXPOSURE LIMITS ACGIH OSHA COMPANY ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN 01 1000 PPM N.E. 800 PPM N.E. N.E. YES 02 50 PPM N.E. 500 PPM N.E. YES 03 500 PPM 750 PPM 1000 PPM N.E. N.E. NO (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION ***EMERGENCY OVERVIEW***: Harmful if inhaled. Causes eye irritation. Extremely flammable liquid and vapor. Vapors may cause flash fire or explosion. Aspiration hazard. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL. CONTENTS UNDER PRESSURE! HARMFUL OR FATAL IF SWALLOWED. MAY ENTER LUNGS AND CAUSE DAMAGE. EXTREMELY FLAMMABLE AEROSOL EFFECTS OF OVEREXPOSURE - EYE CONTACT: Causes moderate to severe eye irritation. Moderately irritating to the eyes. EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Causes skin irritation. Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). EFFECTS OF OVEREXPOSURE - INHALATION: Harmful if inhaled. Prolonged inhalation may be harmful. INHALING LARGE QUANTITIES OF MIST OR VAPORS MAY CAUSE SOME IRRITATION TO NOSE, THROAT, LUNGS. Gross overexposure may cause: Central nervous system depression with dizziness, confusion, incoordination, drowsiness or unconsciousness. Irregular heart beat with a strange sensation in the chest, "heart thumping", apprehension, lightheadedness, feeling of fainting, dizziness, weakness, sometimes progressing to loss of consciousness and death. Suffocation, if air is displaced by vapors. Exposure of high doses may cause central nervous system depression (anesthetic-like effects). Doses which cause anesthetic-like effects may also cause adverse effects in liver, lungs, and kidneys. EFFECTS OF OVEREXPOSURE - INGESTION: Ingestion is not considered to be a hazard encountered in normal industrial use. This material may be harmful or fatal if swallowed. Aspiration hazard. Depression of the central nervous system can occur. EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Overexposure may cause nervous system damage. Overexposure may cause lung damage. Repeated contact with skin may irritate pre-existing skin conditions. PRIMARY ROUTE (S) OF ENTRY: SKIN CONTACT SKIN ABSORPTION INHALATION INGESTION EYE CONTACT SECTION 4 - FIRST AID MEASURES FIRST AID - EYE CONTACT: Holding eyelids open, flush eyes with running water for 5 minutes. Remove contact lenses if wearing and flush open eyes with running water for at least 15 minutes. Seek medical attention. FIRST AID - SKIN CONTACT: Wash with soap and large amounts of water. Remove contaminated clothing. Get medical attention if irritation develops or persists. Wash contaminated clothing before re-use. FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. FIRST AID - INGESTION: If swallowed, do NOT induce vomiting. Call physician immediately. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: -132 F LOWER EXPLOSIVE LIMIT: 1.0 % UPPER EXPLOSIVE LIMIT: 12.8 % AUTOIGNITION TEMPERATURE: ND EXTINGUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL FOAM WATER FOG UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors may form explosive mixture with air. Vapors can travel to a source of ignition and flash back. Extremely Flammable. Material will readily ignite at room temperatures in the presence of an ignition source. "Empty" containers retain product residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT , WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Contents under pressure. Containers may explode if exposed to high temperatures. SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if exposed to heat (fire). As in any fire, wear self-contained breathing apparatus pressure-demand. (MSHA/NIOSH approved or equivalent) and full protective gear. Keep containers and surroundings cool with water spray. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. SECTION 6 - ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Use recommended personal protective equipment. Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Do not flush into surface water or sanitary sewer system. SECTION 7 - HANDLING AND STORAGE AEROSOL LEVEL: 3 HANDLING: Wash thoroughly after handling. Ensure all equipment is electrically grounded before beginning transfer operations. Use only in well-ventilated area. STORAGE: Keep away from heat, sparks and flame. Keep from freezing. Keep container closed when not in use. KEEP OUT OF THE REACH OF CHILDREN! Do not store above 120F (49C). Do not spray into open flame or near other sources of ignition. Do not store in direct sunlight, puncture, crush or incinerate container. SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any air contaminants to within their TLV's during the use of this product. Use explosion-proof ventilation equipment. RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection. A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. SKIN PROTECTION: Impervious gloves should be used. EYE PROTECTION: Wear safety glasses with side shields or goggles when using this product. OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE FOLLOWED. HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they may retain product residues. Use spark-proof tools and explosion proof equipment. Avoid prolonged or repeated contact with skin. Avoid breathing vapors from heated material. Avoid contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE: -12 - 158 F VAPOR DENSITY: Is heavier than air ODOR: SOLVENT ODOR THRESHOLD: ND APPEARANCE: WHITE EVAPORATION RATE: Is faster than Butyl Acetate SOLUBILITY IN H2O: NEGLIGIBLE FREEZE POINT: ND SPECIFIC GRAVITY: 0.6046 VAPOR PRESSURE: ND pH @ 0.0 %: NA PHYSICAL STATE: AEROSOL VISCOSITY: ND COEFFICEINT OF WATER/OIL DISTRIBUTION: ND VOC, % (wt): 97.17 % (See Section 16 for abbreviation legend) SECTION 10 - STABILITY AND REACTIVITY CONDITIONS TO AVOID: AVOID OPEN FLAMES AND HIGH TEMPERATURES. Avoid contact with strong oxidizing agents. ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES. Keep product away from temperatures in excess of 120F (49C). Do not crush, puncture or incinerate container. Do not expose to direct sunlight or store where temperatures could exceed 120F. INCOMPATIBILITY: MAY REACT WITH OXYGEN AND STRONG OXIDIZING AGENTS SUCH AS CHLORATES, NITRATES, PEROXIDES, ETC. AVOID CONTACT WITH STRONG OXIDIZERS. HAZARDOUS DECOMPOSITION PRODUCTS: SMOKE, FUMES, OXIDES OR CARBON, NITROGEN, SILICA, AND VARIOUS METAL OXIDES ARE POSSIBLE DECOMPOSITION PRODUCTS. Carbon Monoxide, carbon dioxide, smoke, fumes. HAZARDOUS POLYMERIZATION: Will not occur under normal conditions. STABILITY: This product is stable under normal storage conditions. SECTION 11 - TOXICOLOGICAL PROPERTIES PRODUCT LD50: 5800 mg/kg PRODUCT LC50: 50100 ppm COMPONENT TOXICOLOGICAL INFORMATION: CHEMICAL NAME LD50 LC50 PROPANE/ISOBUTANE/N-BUTANE NE 658000 MG/M3/4HRAT HEXANE 12705 MG/KG/RAT 150000 MG/M3/MOUSE 2-PROPANONE 5800 MG/KG/RAT 50100 MG/M3/8H/RAT BORON NITRIDE NO DATA NO DATA SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No Information. SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL REGULATIONS. SECTION 14 - TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME: CONSUMER COMMODITY DOT TECHNICAL NAME: DOT HAZARD CLASS: ORM-D HAZARD SUBCLASS: DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE: DOT EXEMPTIONS: DOT SPECIAL INSTRUCTIONS: IMDG SHIPPING INFORMATION: UN1950 IMDG PROPE SHIPPING NAME: AEROSOLS IMDG TECHNICAL NAME: IMDG HAZARD CLASS: 2.1 HAZARD SUBCLASS: PACKING GROUP: FLASH POINT, C: -91.1 IMDG EXEMPTIONS: LIMITED QUANTITY IMDG SPECIAL INSTRUCTIONS: MARINE POLLUTANT (YES/NO): N IATA SHIPPING INFORMATION: UN1950 IATA PROPER SHIPPING NAME: AEROSOLS, FLAMMABLE IATA TECHNICAL NAME: IATA HAZARD CLASS: 2.1 HAZARD SUBCLASS: PACKING GROUP: IATA EXEMPTIONS: LIMITED QUANTITY IATA SPECIAL INSTRUCTIONS: SECTION 15 - REGULATORY INFORMATION U.S. FEDERAL REGULATIONS: AS FOLLOW - OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) CERCLA - SARA HAZARD CATEGORY: This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD PRESSURIZED GAS HAZARD SARA SECTION 313: This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: CHEMICAL NAME CAS NUMBER WT/WT % IS LESS THAN HEXANE 64742-49-0 20-30 TOXIC SUBSTANCES CONTROL ACT: This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States: CHEMICAL NAME CAS NUMBER No information is available. U.S. STATE REGULATIONS: AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW: The following materials are non-hazardous, but are among the top five components in this product: CHEMICAL NAME CAS NUMBER BORON NITRIDE 10043-11-5 PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous ingredients are present in the product at greater than 3%: CHEMICAL NAME CAS NUMBER No non-hazardous ingredients are present at greater than 3%. CALIFORNIA PROPOSITION 65: WARNING: The chemical(s) noted below and contained in this product, are known to the state of California to cause cancer, birth defects or other reproductive harm: CHEMCIAL NAME CAS NUMBER No Proposition 65 chemicals exist in this product. INTERNATIONAL REGULATIONS: AS FOLLOWS - CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS: A,B5, D2B SECTION 16 - OTHER INFORMATION HMIS RATING - HEALTH: 2 FLAMMABILITY: 4 REACTIVITY: 0 PREVIOUS MSDS REVISION DATE: 08/31/10 REASON FOR REVISION: NEW PRODUCT LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined DISCLAIMER *****THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION*** The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations. <END OF MSDS>
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.