Product Categories See All
Track Order Status
MSDS Sheet 0065330Printer Friendly View
MSDS Material Safety Data Sheet THE PENRAY COMPANIES SUPER X ENGINE CLEANER AND DEGREASER-620 MSDS Number: 620 Revision Date: 10/12/10 1 PRODUCT AND COMPANY IDENTIFICATION Manufacturer The Penray Companies, Inc. 440 Denniston Ct. Wheeling, IL 60090 Contact: EH&S Manager Telephone Number: 847-459-5000 FAX Number: 847-459-5043 E-Mail: Web: Product Name: SUPER X ENGINE CLEANER AND DEGREASER-620 Revision Date 10/12/10 Version: 2 MSDS Number: 620 Common Name AEROSOL ENGINE CLEANER AND DEGREASER CONTAINING KEROSENE EMERGENCY PHONE NUMBER (800) 752-7869 NFPA 704M RATING: HEALTH: 1 FIRE: 3 REACTIVITY: 0 SPECIAL: 0=INSIGNIFICANT 1=SLIGHT 2=MODERATE 3=HIGH 4=EXTREME 2 HAZARDS IDENTIFICATION Route of Entry: Skin absorption and inhalation Target Organs: Lungs, kidneys, liver and nervous system. Inhalation: Respiratory irritation and dizziness Skin Contact: Prolonged contact with skin can cause irritation. Repeated skin contact may cause persistent irritation and dermatitis Eye Contact: Will cause irritation upon contact. Ingestion: Product may cause discomfort, nausea, vomiting and diarrhea. CARCINOGENICITY: Product is not considered a carcinogen by OSHA, NTP or IARC MEDICAL CONTITIONS: Pre-existing eye or skin conditions may be aggravated by over-exposure to this product. 3 COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENT CAS NUMBER PERCENT WEIGHT KEROSENE 8008-20-6 5-10% 2-BUTOXYETHANOL 111-76-2 3-7% NONYL PHENOL ETHOXYLATE 9016-45-9 1-5% PROPANE / n-BUTANE 74-98-6/106-97-8 10-30% Mixture BASE LUBRICATING OILS MIXTURE 40-70% 4 FIRST AID MEASURES Inhalation: Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention. Inhalation hazard unlikely due to low volatility of product. Skin Contact: Wash area with soap and water. seek medical attention if irritation persists Eye Contact: Immediately flush eyes with plenty of water for 15 minutes. Seek medical attention. Ingestion: DO NOT induce vomiting. Only give CONSCIOUS victim two glasses of water and seek medical attention. NEVER give UNCONSCIOUS anything by mouth. 5 FIRE FIGHTING MEASURES Flammability Class III Extremely Flammable Aerosol Classification: EXTINGUISHING MEDIA: Carbon Dioxide (CO2) Dry Chemical, Foam. UNUSUAL FIRE AND Vapors are heavier than air and can collect in low areas EXPLOSION HAZARDS: FIRE FIGHTING Containers can build up pressure if exposed to fire. INSTRUCTIONS: Containers should be cooled with water supply. FIRE FIGHTING Self-contained breathing apparatus with full face piece EQUIPMENT: operated in positive pressure mode. 6 ACCIENTAL RELEASE MEASURES SPILL/LEAK Notify safety personnel, evacuate all unnecessary PROCEDURES: personnel and provide adequate ventilation. If feasible, and without risk, clean-up personnel should stop leak. All clean up personnel should wear proper personal protective equipment. SMALL SPILLS: Clean with inert absorbent and place in recovery drums for disposal. LARGE SPILLS: Dike to prevent further migration of material. DO NOT release into waterways or sewers. Follow applicable federal and state regulations. 7 HANDLING AND STORAGE Handling Wash thoroughly after handling. Do not get into eyes, on Precautions: skin or on clothing..Do not smoke while using this product. Do not use near excessive heat, sparks, or open flame. Storage Store in clean, dry locations away from excessive heat. Requirements: Store in areas designated for the storage of Level II aerosols according to NFPA 30B (Manufacturing and Storage of Aerosol Products.) 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Eye wash station and safety shower. Controls: Strong general ventilation or local exhaust. Protective EYE: Chemical splash goggles with indirect or no Equipment: ventilation. SKIN: Chemical resistant gloves, such as nitrile. RESPIRATORY: Organic vapor air purifying respirator if vapors are a nuisance or if the concentrations are above PEL or TLV. Exposure Never eat, drink or smoke in work area Guidelines/Other: 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance: Colorless liquid Physical State: liquid Boiling Point: BT 220-440 F Odor: petroleum Freezing/Melting distillate Pt.: pH: Solubility: Not soluble in water Vapor Pressure: BT 0.4-5.0 mmHG Spec Grav./Density: BT 0..820-0.825 Vapor Density: BT 4.5 - 6.2 VOC: <45% Evap. Rate: >1.0 10 STABILITY AND REACTIVITY Stability: Material is stable. Conditions to avoid: Excessive heat and open flame. Materials to avoid Strong oxidizing agents (incompatability): Hazardous Decomposition Carbon Monoxide and Carbon Dioxide products: Hazardous Polymerization: Cannot occur 11 TOXICOLOGICAL INFORMATION LD50 KEROSENE 28 ML/KG (ORAL) 12 ECOLOGICAL INFORMATION No data 13 DISPOSAL CONSIDERATIONS Dispose of in accordance with all applicable state, federal and local regulations. 14 TRANSPORT INFORMATION DOMESTIC: CONSUMER COMMODITY ORM-D EXPORT: AEROSOL DISPENSERS, CLASS 2.0 UN 1950, LIMITED QUANTITY 15 REGULATORY INFORMATION U.S. FEDERAL REGULATIONS OSHA: Considered to be a hazardous material as defined by 29CFR1910.1200 EPA SARA TITLE III Section 311-312 (40CFR370): If stored in excess of the threshold quantities, this product should be reported as a (n): IMMEDIATE (acute) HEALTH HAZARD DELAYED (chronic) HEALTH HAZARD FIRE HAZARD SUDDEN RELEASE HAZARD Section 313 (40CFR370): This product contains ingredients which are subject to the reporting requirements of SARA 313: 2 - Butoxyethanol 16 OTHER INFORMATION CALIFORNIA PROPOSITION 65: This product does not contain ingre4dients which are on the current Proposition 65 list. Notes: NG=NOT GIVEN BT=BETWEEN <=LESS THAN >=GREATER THAN USERS RESPONSIBILITY;This MSDS provides environmental, health and safety information. This product is to be used in applications consistent with our product literature and container label. Individuals handling this product should be informed to the recommended safety precautions and have access to this MSDS. Please contact your local sales representative ot our EH&S Department for further information. END OF MSDS END OF MSDS DOCUMENT
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.