Product Categories See All
Track Order Status
Sheet 0058850Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: BIO KLEEN DIESEL FUEL BIOCIDE CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Diesel fuel additive 1.3. Name, Address, and Telephone of the Responsible Party Company: Power Service Products, Inc. P.O. Box 1089 Weatherford, TX 76086 Email: email@example.com Phone: 800/643-9089 or 817-599-9486 1.4. Emergency Telephone Number Emergency |Within USA 1-800-424-9300. Outside USA 001-703-527-3887 (Call number |Collect). SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Health Hazard |Category Criteria | Acute |4 Toxicity, | Oral: | Acute |3 Toxicity, | Dermal: | Acute |4 Toxicity, | Inhalation, | Vapors: | Skin |2 Corrosion/Irri| tation: | Serious Eye |1 Damage/Eye | Irritation: | Respiratory |NC Sensitization:| Skin |1 Sensitization:| Germ Cell |NC Mutagenicity: | Health Hazard |NC Criteria | Carcinogenicit|NC y: | Reproductive |NC Toxicity: | Specific |NC Target Organ | Toxicity, | Single | Exposure: | Specific |NC Target Organ | Toxicity, | Repeated | or Prolonged | Exposure: | Aspiration |NC Hazard: | | Physical |Category Properties | Criteria | Explosives: |NC Flammable |NC Gases: | Flammable |NC Aerosols: | Oxidizing |NC Gases: | Gases Under |NC Pressure: | Flammable |NC Liquids: | Flammable |NC Solids: | Self-Reactive |NC Chemicals: | Pyrophoric |NC Liquids: | Pyrophoric |NC Solids: | Self-Heating |NC Chemicals: | Chemicals |NC Which, in | Contact with | Water, | Emit Flammable| Gases: | Oxidizing |NC Liquids: | Oxidizing |NC Solids: | Organic |NC Peroxides: | Corrosive to |NC Metals: | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Skull and Crossbones |Corrosion |Exclamation Mark Signal Word (GHS-US) |DANGER Hazard Statements (GHS-US) |Combustible liquid. Harmful if swallowed or if |inhaled. Toxic in contact with skin. Causes skin |irritation. May cause an allergic skin reaction. |Causes serious eye damage. Precautionary Statements |PREVENTION: (GHS-US) |keep away from heat, sparks, open flames and hot |surfaces. No smoking. Avoid breathing dust, fume, |gas, mist, vapors, and spray. Wash skin thoroughly |after handling. Do not eat, drink or smoke when |using this product. Use only outdoors or in a |well-ventilated area. Contaminated work clothing |should not be allowed out of the workplace. Wear |protective gloves, eye and face protection. | |RESPONSE: |If SWALLOWED: Call a POISON CENTER or |doctor/physician if you feel unwell. Rinse mouth. IF |ON SKIN: wash with plenty of soap and water. Call a |POISON CENTER or doctor/physician if you feel |unwell. If skin irritation occurs: Get medical |advice/attention. Remove/Take off immediately all |contaminated clothing. IF INHALED: Remove victim to |fresh air and keep at rest in a position comfortable |for breathing. Call a POISON CENTER or |doctor/physician if you feel unwell. IF IN EYES: |Rinse cautiously with water for several minutes. |Remove contact lenses, if present and easy to do. |Continue rinsing. Immediately call a POISON CENTER |or doctor/physician. In case of fire: Use dry sand, |dry chemical or alcohol-resistant foam for |extinction. | |STORAGE: |Store in a well-ventilated place. Keep cool. Store |locked up. | |DISPOSAL: |Dispose of contents/container to an approved waste |disposal plant. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) 4-(2-nitrobutyl) morpholine |2224-44-4 |81.0 | Methylene Dimorpholine |5625-90-1 |5.7 | 4,4'-(2-Ethyl-2-nitropropane-1,3|1854-23-5 |5.0 | -diyl)bismorpholine | | | Morpholine |110-91-8 |5.0 | 1-Nitropropane |108-03-2 |3.3 | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First aid responders should pay attention to self-protection and use the recommended protective clothing (chemical resistant gloves, splash protection). If potential for exposure exists refer to Section 8 for specific personal protective equipment. First-aid Measures After Inhalation: Move person to fresh air. If person is not breathing, call an emergency responder or ambulance, then give artificial respiration; if by mouth to mouth use rescuer protection (pocket mask etc.). Call a poison control center or doctor for treatment advice. First-aid Measures After Skin Contact: Take off contaminated clothing. Wash skin with soap and plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice. Wash clothing before reuse. Shoes and other leather items which cannot be decontaminated should be disposed of properly. Suitable emergency safety shower facility should be immediately available. First-aid Measures After Eye Contact: Wash immediately and continuously with flowing water for at least 30 minutes. Remove contact lenses after first 5 minutes and continue washing. Obtain prompt medical consultation, preferably from an ophthalmologist. Suitable emergency eye wash facility should be immediately available. First-aid Measures After Ingestion: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by the poison control center or doctor. Never give anything by mouth to an unconscious person. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Aside from the information found under Description of first aid measures (above) and Indication of immediate medical attention and special treatment (below), any additional important symptoms and effects are described in Section 11: Toxicology Information. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Notes to physician: Chemical eye burns may require extended irrigation. Obtain prompt consultation, preferably from an ophthalmologist. Probable mucosal damage may contraindicate the use of gastric lavage. If burn is present, treat as any thermal burn, after decontamination. Due to irritant properties, swallowing may result in burns/ulceration of mouth, stomach and lower gastrointestinal tract with subsequent stricture. Aspiration of vomitus may cause lung injury. Suggest endotracheal/esophageal control if lavage is done. No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient. Have the Safety Data Sheet, and if available, the product container or label with you when calling a poison control center or doctor, or going for treatment. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water fog or fine spray. Dry chemical fire extinguishers. Carbon dioxide fire extinguishers. Foam. Alcohol resistant foams (ATC type) are preferred. General purpose synthetic foams (including AFFF) or protein foams may function, but will be less effective. Water fog, applied gently may be used as a blanket for fire extinguishment. Unsuitable Extinguishing Media: No data available. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/or irritating. Combustion products may include and are not limited to: Nitrogen oxides. Carbon monoxide. Carbon dioxide. Explosion Hazard: Container may rupture from gas generation in a fire situation. Violent steam generation or eruption may occur upon application of direct water stream to hot liquids. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Keep people away. Isolate fire and deny unnecessary entry. Use water spray to cool fire exposed containers and fire affected zone until fire is out and danger of reignition has passed. Fight fire from protected location or safe distance. Consider the use of unmanned hose holders or monitor nozzles. Immediately withdraw all personnel from the area in case of rising sound from venting safety device or discoloration of the container. Do not use direct water stream. May spread fire. Move container from fire area if this is possible without hazard. Burning liquids may be moved by flushing with water to protect personnel and minimize property damage. Water fog, applied gently may be used as a blanket for fire extinguishment. Contain fire water run-off if possible. Fire water run-off, if not contained, may cause environmental damage. Review the "Accidental Release Measures" and the "Ecological Information" sections of this (M)SDS. Protection During Firefighting: Wear positive-pressure self-contained breathing apparatus (SCBA) and protective firefighting clothing (includes firefighting helmet, coat, trousers, boots, and gloves). Avoid contact with this material during firefighting operations. If contact is likely, change to full chemical resistant firefighting clothing with self-contained breathing apparatus. If this is not available, wear full chemical resistant clothing with self-contained breathing apparatus and fight fire from a remote location. For protective equipment in post-fire or non-fire clean-up situations, refer to the relevant sections. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Evacuate area. Refer to Section 7, Handling and Storage, for additional precautionary measures. Only trained and properly protected personnel must be involved in clean-up operations. Keep upwind of spill. Ventilate area of leak or spill. No smoking in area. Use appropriate safety equipment. For additional information, refer to Section 8, Exposure Controls / Personal Protection. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, Ecological Information. Spills or discharge to natural waterways is likely to kill aquatic organisms. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Contain spilled material if possible. Collect in suitable and properly labeled containers. See Section 13, Disposal Considerations, for additional information. Methods for Cleaning Up: Contain spilled material if possible. Collect in suitable and properly labeled containers. See Section 13, Disposal Considerations, for additional information. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: KEEP OUT OF REACH OF CHILDREN. Keep away from heat, sparks and flame. Do not get in eyes. Avoid breathing vapor. Avoid contact with skin and clothing. Avoid prolonged or repeated contact with skin. Do not swallow. Wash thoroughly after handling. Keep container closed. Use with adequate ventilation. See Section 8, EXPOSURE CONTROLS / PERSONAL PROTECTION. Containers, even those that have been emptied, can contain vapors. Do not cut, drill, grind, weld, or perform similar operations on or near empty containers. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Avoid temperatures above 100�C (212�F). Store away from incompatible materials. See STABILITY AND REACTIVITY section. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Component Regulation Type of listing Value/Notation Morpholine ACGIH OSHA Table Z-1 TWA TWA 20 ppm (absorbed via SKIN) 70 mg/m3 20 ppm (absorbed via SKIN) 1- Nitropropane ACGIH OSHA Table Z-1 TWA TWA 25 ppm 90 mg/m3 25 ppm 8.2. Exposure Controls Appropriate Engineering |Use local exhaust ventilation, or other engineering Controls |controls to maintain airborne levels below exposure |limit requirements or guidelines. If there are no |applicable exposure limit requirements or |guidelines, general ventilation should be sufficient |for most operations. Local exhaust ventilation may |be necessary for some operations. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |Use gloves chemically resistant to this material. |Examples of preferred glove barrier materials |include: Chlorinated polyethylene. Polyethylene. |Ethyl vinyl alcohol laminate ("EVAL"). Examples of |acceptable glove barrier materials include: Butyl |rubber. Natural rubber ("latex"). Neoprene. |Nitrile/butadiene rubber ("nitrile" or "NBR"). |Polyvinyl alcohol ("PVA"). Polyvinyl chloride ("PVC" |or "vinyl"). Viton. NOTICE: The selection of a |specific glove for a particular application and |duration of use in a workplace should also take into |account all relevant workplace factors such as, but |not limited to: Other chemicals which may be |handled, physical requirements (cut/puncture |protection, dexterity, thermal protection), |potential body reactions to glove materials, as well |as the instructions/specifications provided by the |glove supplier. Eye Protection |Use chemical goggles. Skin and Body Protection |OTHER Protection: Use protective clothing chemically |resistant to this material. Selection of specific |items such as face shield, boots, apron, or full |body suit will depend on the task. Respiratory Protection |Respiratory protection should be worn when there is |a potential to exceed the exposure limit |requirements or guidelines. If there are no |applicable exposure limit requirements or |guidelines, wear respiratory protection when adverse |effects, such as respiratory irritation or |discomfort have been experienced, or where indicated |by your risk assessment process. For most |conditions, no respiratory protection should be |needed; however, if material is heated or sprayed, |use an approved air-purifying respirator. The |following should be effective types of air-purifying |respirators: Organic vapor cartridge with a |particulate pre-filter. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |Liquid, yellow to brown color Odor |Amine Odor Threshold |Not available pH |9.5 - 10.0 (ASTEM E70) Relative Evaporation Rate |Not available (butylacetate=1) | Melting Point |Not available Freezing Point |50.9�F (10.5�C) Literature Boiling Point (760 mmHg) |346.8�F (174.9�C) ASTM D1120 Flash Point |160�F (>71�C) Pensky-Martens Closed Cup ASTM |D93 Auto-ignition Temperature |500�F (260�C) EC Method A15 Decomposition Temperature |Not available Flammability (solid, gas) |Not available Vapor Pressure |1.04 hPa at 77�F (25�C) EC Method A4 Relative Vapor Density at 20 �C |Not available Relative Density |1.1 at 77�F (25�C) ASTM D891 Specific Gravity | Solubility |3.1% at 77�F (25�C) EC Method A6 Partition coefficient: |Not available n-octanol/water | Viscosity |Dynamic Viscosity 18.2 mPa.s at 68�F (20�C) |OECD 114 (Brookfield Viscosity- @100 rpm, #0 |spindle) 7.7 mPa.s at 104�F (40�C) OECD 114 |(Brookfield Viscocity - @ 100 rpm, #0 |spindle) |Kinematic Viscosity 16.55 cSt at 68�F (20�C) |Calculated. 7.0 cSt at 104�F (40�C) |Calculated Lower Flammable Limit |Not available Upper Flammable Limit |Not available 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity No dangerous reaction known under conditions of normal use. 10.2 Chemical Stability Stable under recommended storage conditions. See Storage, Section 7. Unstable at elevated temperatures. 10.3 Possibility of Hazardous Reactions Polymerization will not occur. 10.4 Conditions to Avoid Can crystallize. Dissolve crystals before use by warming and mixing. Avoid temperatures above 95�F (35�C.) and below 50�F (10�C.). Potentially violent decomposition can occur above 212�F. (100�C.). Generation of gas during decomposition can cause pressure in closed systems. Pressure build-up can be rapid. 10.5 Incompatible Materials Avoid contact with oxidizing materials. Avoid contact with: Acidic pH. Acids. Reaction with acid can generate flammable formaldehyde gas. 10.6 Hazardous Decomposition Products Decomposition products depend upon temperature, air supply and the presence of other materials. Toxic flammable gases can be released during decomposition. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: ACUTE ORAL TOXICITY: Low toxicity if swallowed. Small amounts swallowed incidentally as a result of normal handling operations are not likely to cause injury; however, swallowing larger amounts may cause injury. LD50, Rat 620 mg/kg ACUTE DERMAL TOXICITY: Prolonged or widespread skin contact may result in absorption of harmful amounts. LD50, Rabbit 420 mg/kg ACUTE INHALATION TOXICITY: Vapor from heated material or mist may cause respiratory irritation. For narcotic effects: No specific, relevant data available for assessment. Maximum achievable concentration. LC50, 4 h, Aerosol, Rat > 2.33 mg/l Skin Corrosion/Irritation: Brief contact may cause severe skin irritation with pain and local redness. Repeated contact may cause skin burns. Symptoms may include pain, severe local redness, swelling, and tissue damage. Serious Eye Damage/Irritation: May cause severe irritation with corneal injury which may result in permanent impairment of vision, even blindness. Chemical burns may occur. Mist may cause severe eye irritation and corneal injury. Respiratory or Skin Sensitization: SKIN: Skin contact may cause an allergic skin reaction. RESPIRATORY: No relevant data found. Germ Cell Mutagenicity: In vitro genetic toxicity studies were negative in some cases and positive in other cases. Animal genetic toxicity studies were negative. Carcinogenicity: No relevant data found. Reproductive Toxicity: In animal studies, did not interfere with reproduction. In animal studies, did not interfere with fertility. Specific Target Organ Toxicity (Single Exposure): Evaluation of available data suggests that this material is not an STOT-SE toxicant. Specific Target Organ Toxicity (Repeated Exposure): Repeated exposure did not produce systemic toxicity when applied to the skin of rabbits. Repeated exposure did not produce systemic toxicity when applied to the skin of rats. Based on available data, repeated exposures are not anticipated to cause significant adverse effects. Aspiration Hazard: May be harmful if swallowed and enters airways. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Acute toxicity to fish: Material is highly toxic to aquatic organisms on an acute basis (LC50 / EC50 between 0.1 and 1 mg/L in most sensitive species tested). LC50, Oncorhynchus mykiss (rainbow trout), flow-through, 96 h: 2.3 mg/l, OECD Test Guideline 203 or Equivalent LC50, Lepomis macrochirus (bluegill sunfish), semi-static test, 96 h: 1.3 mg/l, OECD Test Guideline 203 or Equivalent LC50, Oncorhynchus mykiss (rainbow trout), semi-static test, 96 h: 1.1 mg/l, OECD Test Guideline 203 or Equivalent Acute toxicity to aquatic invertebrates: EC50, Daphnia magna (water flea), flow-through test, 48 h, 3.23 mg/l, OECD Test Guideline 202 or Equivalent NOEC, Dahnia magna (water flea), flow-through test, 48 h, 1.77 mg/l, OECD Test Guideline 202 or Equivalent EC50, Daphnia magna (water flea), static test, 48 h, 1.9 mg/l, OECD Test Guideline 202 or Equivalent LC50, pink shrimp (Penaeus duorarum), semi-static test, 96 h: 2.2 mg/l Acute toxicity to algae/aquatic plants: EC50, Pseudokirchneriella subcapitata (green alga), biomass growth inhibition, 96 h: 0.844 mg/l, OECD Test Guideline 201 or Equivalent Toxicity to Above Ground Organisms: Material is practically non-toxic to birds on an acute basis (LD50 > 2000 mg/kg). Material is practically non-toxic to birds on a dietary basis (LC50 > 5000 ppm). Oral LD50, Anas platyrhynchos (mallard duck): 2,695 mg/kg Dietary LC50, Colinus virginianus (bobwhite quail): > 5,620 ppm Dietary LC50, Anas platyrhynchos (mallard duck): >5,620 ppm 12.2. Persistence and Degradability Abiotic degradation: The material is rapidly degradable by abiotic means. 12.3. Bioaccumulative Potential No data available for this product. Based on information for component(s): Bioconcentration potential is low (BCF < 100 or Log Pow < 3). 12.4. Mobility in Soil Based on information for component(s): Potential for mobility in soil is high (Koc between 50 and 150). Partition coefficient, soil organic carbon/water (Koc): 50 Estimated. 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY OF WATER. All disposal practices must be in compliance with all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations. Waste characterizations and compliance with applicable laws are the responsibility solely of the waste generator. POWER SERVICE PRODUCTS HAS NO CONTROL OVER THE MANAGEMENT PRACTICES OF THE PARTIES HANDLING OR USING THIS MATERIAL. THE INFORMATION PRESENTED HERE PERTAINS ONLY TO THE PRODUCT AS SHIPPED IN ITS INTENDED CONDITION AS DESCRIBED IN SDS SECTION COMPOSITION INFORMATION. FOR UNUSED & UNCOMTAMINATED PRODUCTS, the preferred option is to contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. The preferred option in other jurisdictions is to contact the regulatory authority for this product for guidance. Incinerator or other thermal destruction device. State or local laws may impose additional regulatory requirements regarding disposal. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Disinfectant, Liquid, Toxic, N.O.S., |(4-(2-Nitrobutyl)Morpholine) Hazard Class |6.1 |<PICTOGRAM PHRASE> Identification Number|UN 3142 | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> Section 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA Section 311/312 Hazard Classes |Immediate (Acute) Health Hazard Yes |Delayed (Chronic) Health Hazard No |Fire Hazard |Yes |Reactive Hazard |No |Sudden Release of Pressure Hazard No Toxic Substances Control Act (TSCA) |This product contains chemical substance(s) |exempt from U.S. EPA TSCA Inventory |requirements. It is regulated as a pesticide |subject to the Federal Insecticide, |Fungicide, and Rodenticide Act (FIFRA) |requirements. 15.2 US State Regulations <COMPONENT> Pennsylvania (Worker and Community Right-To-Know Act): The following chemical are listed because of the additional requirements of Pennsylvania law Component CAS# 1-Nitropropane 108-03-2 Morpholine 110-91-8 California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986): This product contains no listed substances known to the State of California to cause cancer, birth defects or other reproductive harm, at levels which would require a warning under the statute. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |May 30, 2015. Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| |Corrosive -- | | ----| |Causes irreversible eye damage -- | | ----| |Harmful if swallowed -- | | ----| |Harmful if absorbed through skin -- | | ----| |Prolonged or frequently repeated skin contact -- | |may cause allergic reactions in some | |individuals. | |This pesticide is toxic to fish and aquatic | |organisms. Grainger disclaimer.
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.