Product Categories See All
Track Order Status
SDS Sheet 0057770Printer Friendly View
Safety Data Sheet Date of Issue: 12/02/14 |Revision Date: |Revision Number: 3.01 Imperial Supplies Part Number: 0057770 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: 3M Perfect-It Machine Polish, 06053, 06064, 06065, 39061 CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Automotive, Rubbing Compound 1.3. Name, Address, and Telephone of the Responsible Party Company 3M Automotive Aftermarket 3M Center, St. Paul, MN 55144-1000, USA Phone: 1-888-364-3577 1.4. Emergency Telephone Number Emergency | 1-800-364-3577 or (651) 737-6501 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Skin |Category 1. Sensitizer | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Exclamat| | | | | |ion Mark| | | | | Signal Word (GHS-US) |Warning Hazard Statements (GHS-US) |May cause an allergic skin reaction. Precautionary Statements |General: (GHS-US) |Keep out of reach of children. |Prevention: |Avoid breathing dust/fume/gas/mist/vapors/spray. |Wear protective gloves. |Contaminated work clothing must not be allowed out |of the workplace. |Response: |IF ON SKIN: Wash with plenty of soap and water. |If skin irritation or rash occurs: Get medical |advice/attention. |Wash contaminated clothing before reuse. |Disposal: |Dispose of contents/container in accordance with |applicable local/regional/national/international |regulations. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: None. 2.4. Unknown Acute Toxicity (GHS-US) 1% of the mixture consists of ingredients of unknown acute oral toxicity. 1% of the mixture consists of ingredients of unknown acute dermal toxicity. 35% of the mixture consists of ingredients of unknown acute inhalation toxicity. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Water |7732-18-5 |60 - 90 | Hydrotreated Light Petroleum |64742-47-8 |10 - 30 | Distillates | | | Aluminum Oxide (non-fibrous) |1344-28-1 |5 - 15 | Dodecamethylcyclohexasiloxane |540-97-6 |1 - 5 | White Mineral Oil (Petroleum) |8042-47-5 |1 - 5 | Ethylene oxide, polymer with |Trade Secret* |0.1 - | ethylenediamine and propylene | |1.2 | oxide | | | *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. First-aid Measures After Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. First-aid Measures After Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. First-aid Measures After Ingestion: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: See Section 11.1. Information on toxicological effects. Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed Not applicable. SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Material will not burn. Use a fire fighting agent suitable for the surrounding fire. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: None inherent in this product. Explosion Hazard: Substance Condition Hydrocarbons During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Oxides of Nitrogen During Combustion Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: No special protective actions for fire-fighters are anticipated. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: Evacuate area. Ventilate the area with fresh air. 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions Avoid release to the environment. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Seal the container. Dispose of collected material as soon as possible. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Avoid eye contact. Avoid breathing of dust created by cutting, sanding, grinding or machining. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: No special storage requirements. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters Occupational exposure limits: If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Aluminum Oxide (non-fibrous) 1344-28-1 OSHA TWA(as total dust):15 mg/m3;TWA(respirable fraction):5 mg/m3 Aluminum Oxide (non-fibrous) 1344-28-1 CMRG TWA:1 fiber/cc Aluminum, insoluble compounds 1344-28-1 ACGIH TWA(respirable fraction):1 mg/m3 A4: Not class. as human carcin Hydrotreated Light Petroleum Distillates 64742-47-8 CMRG TWA:165 ppm Kerosine (petroleum) 64742-47-8 ACGIH TWA(as total hydrocarbon vapor, non-aerosol):200 mg/m3 A3: Confirmed animal carcin., Skin Notation White Mineral Oil (Petroleum) 8042-47-5 CMRG TWA:5 mg/m3;STEL:10 mg/m3 Paraffin oil 8042-47-5 OSHA TWA(as mist):5 mg/m3 MINERAL OILS, HIGHLYREFINED OILS 8042-47-5 ACGIH TWA(inhalable fraction):5 mg/m3 A4: Not class. as human carcin 8.2. Exposure Controls Appropriate Engineering |Use general dilution ventilation and/or local Controls |exhaust ventilation to control airborne exposures to |below relevant Exposure Limits and/or control |dust/fume/gas/mist/vapors/spray. If ventilation is |not adequate, use respiratory protection equipment. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | If this product is used in a manner that presents a |higher potential for exposure (eg. spraying, high |splash potential etc.), then use of protective |coveralls may be necessary. Select and use body |protection to prevent contact based on the results |of an exposure assessment. The following protective |clothing material(s) are recommended: Apron - |Nitrile. Eye Protection |Select and use eye/face protection to prevent |contact based on the results of an exposure |assessment. The following eye/face protection(s) are |recommended: Safety Glasses with side shields. Skin and Body Protection |Select and use gloves and/or protective clothing |approved to relevant local standards to prevent skin |contact based on the results of an exposure |assessment. Selection should be based on use factors |such as exposure levels, concentration of the |substance or mixture, frequency and duration, |physical challenges such as temperature extremes, |and other use conditions. Consult with your glove |and/or protective clothing manufacturer for |selection of appropriate compatible |gloves/protective clothing. Gloves made from the |following material(s) are recommended: Neoprene |Nitrile Rubber. Respiratory Protection |An exposure assessment may be needed to decide if a |respirator is required. If a respirator is needed, |use respirators as part of a full respiratory |protection program. Based on the results of the |exposure assessment, select from the following |respirator type(s) to reduce inhalation exposure: |Half facepiece or full facepiece air-purifying |respirator suitable for organic vapors and |particulates. For questions about suitability for a |specific application, consult with your respirator |manufacturer. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid Appearance | Odor |Grey Liquid Odor Threshold |No Data Available pH |7.5 - 9 Relative Evaporation Rate |No Data Available (butylacetate=1) | Melting Point |No Data Available Freezing Point | Boiling Point |No Data Available Flash Point |No flash point Auto-ignition Temperature |No Data Available Decomposition Temperature |No Data Available Flammability (solid, gas) |Not Applicable Vapor Pressure |No Data Available Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity |1.0 - 1.02 [Ref Std: WATER=1] Solubility |No Data Available Partition coefficient: |No Data Available n-octanol/water | Viscosity |22,000 - 28,000 centipoise Lower Flammable Limit |No Data Available Upper Flammable Limit |No Data Available 9.2. Other Information Volatile Organic Compounds: 164 g/l [Test Method: calculated SCAQMD rule 443.1] Volatile Organic Compounds: 16.0 % weight [Test Method: calculated per CARB title 2] Percent volatile: 81.2 % weight VOC Less H2O & Exempt Solvents: 489 g/l [Test Method: calculated SCAQMD rule 443.1] SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity This material is considered to be non reactive under normal use conditions. 10.2 Chemical Stability Stable. 10.3 Possibility of Hazardous Reactions Hazardous polymerization will not occur. 10.4 Conditions to Avoid None known. 10.5 Incompatible Materials None known. 10.6 Hazardous Decomposition Products Substance Condition None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Symptoms/Injuries After Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Symptoms/Injuries After Eye Contact: Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Symptoms/Injuries After Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Chronic Symptoms: SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Ecotoxicological information: Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects Chemical fate information: Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name | Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> Contact 3M for more information. SARA Section 311/312 Hazard Classes |Fire Hazard - No |Pressure Hazard - No |Reactivity Hazard - No |Immediate Hazard - Yes |Delayed Hazard - No Toxic Substances Control Act (TSCA) |The components of this product are in |compliance with the chemical notification |requirements of TSCA. 15.2 US State Regulations <COMPONENT> Contact 3M for more information. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date | Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.