Product Categories See All
Track Order Status
MSDS Sheet 0056150Printer Friendly View
Permatex, Inc. 10 Columbus Blvd. Hartford, CT 06106 USA Telephone: 1-87-Permatex (877) 376-2839 Emergency: 800-255-3924 International Emergency: 813-248-0585 Material Safety Data Sheet 1. PRODUCT IDENTIFICATION Product Name: B FORCE HYDRAULIC JACK OIL 32 FL. OZ Item No.: 80051 Product Type: Lubricant 2. COMPOSITION/INFORMATION ON INGREDIENTS Component Weight % ACGIH TLV: TWA OSHA PEL: VEGETABLE OILS, 100 Not listed Not listed ADDITIVES NON HAZARDOUS 3. HAZARDS IDENTIFICATION Toxicity: Prolonged skin contact may result in dermatitis in sensitive individuals. At elevated temperatures may cause irritation of the respiratory tract. Primary Routes of Eye and skin contact, ingestion, inhalation Entry: Signs and Symptoms of Overexposure may cause eye and skin redness. Exposure: Medical Conditions None known. Recognized as Being Aggravated by Exposure: 4. FIRST AID MEASURES Ingestion: If swallowed, DO NOT induce vomiting. Keep individual calm. Obtain medical attention. Inhalation: Move to fresh air in case of accidental inhalation of vapours. Skin Contact: Wash off with soap and water. If skin irritation persists, call a physician. Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. 5. FIRE FIGHTING MEASURES Flash Point (Â°F/C): > 400Â°F COC Recommended Carbon Dioxide, Dry Chemicals, Foam. Extinguishing Media: Special Fire-Fighting Firefighters should wear self-contained breathing Procedures: apparatus. Product floats on water. Hazardous Products of Oxides of carbon, Aldehydes Combustion: Unusual Fire/Explosion None. Hazards: Lower Explosive Limit: Not determined. Upper Explosive Limit: Not determined. 6. ACCIDENTAL RELEASE MEASURES Spill Procedures: Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until disposal. 7. HANDLING AND STORAGE Storage: Store in a cool, dry area. Handling: Wash thoroughly after handling. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Eyes: Safety glasses. Skin: Neoprene or nitrile gloves recommended Ventilation: General ventilation is usually adequate. Respiratory Protection: Not required under normal use. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Amber liquid Odor: MILD Boiling Point: Not determined pH: Does not apply Solubility in Water: Nil Specific Gravity: 0.9 @ 15Â°C VOC Content (Wt.%): 0 Vapor Pressure: Not determined Vapor Density (Air = Not determined 1): Evaporation Rate: Not determined 10. STABILITY AND REACTIVITY Chemical Stability: Stable at normal conditions Hazardous Will not occur. Polymerization: Incompatibilities: Strong oxidizers Conditions to Avoid: Heat. Hazardous Products of Oxides of carbon, Aldehydes Combustion: 11. TOXICOLOGICAL INFORMATION See Section 3 12. ECOLOGICAL INFORMATION No data available 13. DISPOSAL CONSIDERATIONS Recommended Method of Disposal should be made in accordance with federal, Disposal: state and local regulations. US EPA Waste Number: NH - Not a RCRA Hazardous Waste Material Comments: Ultimate biodegradation Pw1 > 60% within 28 days as per ASTM D-5864 Aerobic Aquatic Biodegradation of Lubricants 14. TRANSPORTATION INFORMATION DOT (49CFR 172) Domestic Ground Transport DOT Shipping Name: Unrestricted Hazard Class: None UN/ID Number: None Marine Pollutant: None IATA Proper Shipping Name: Not regulated Class of Division: None UN/ID Number: None IMDG Proper Shipping: Unrestricted Hazard Class: None UN Number: None 15. REGULATORY INFORMATION SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical. NONE CALIFORNIA PROP 65: No California Prop 65 chemicals are known to be present. TSCA Inventory Status: Listed on Inventory: YES All components of this product are listed (or exempt) on the EPA TSCA inventory. 16. OTHER INFORMATION Estimated NFPA Rating: HEALTH 1, FLAMMABILITY 1, REACTIVITY 0. Estimated HMIS Classification: HEALTH 1, FLAMMABILITY 1, PHYSICAL HAZARD 0 NFPA is a registered trademark of the National Fire Protection Assn. HMIS is a registered trademark of the National Paint and Coatings Assn. Prepared By: Denise Boyd, Manager-Environmental, Revision Date: February Health & Safety 29/2008 Company: Permatex. Inc. 10 Columbus Blvd. Hartford, Revision Number: 1 CT USA 06106 Telephone No.: 1-87-Permatex (877) 376-2839
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.