Product Categories See All
Track Order Status
MSDS Sheet 0055430Printer Friendly View
MATERIAL SAFETY DATA SHEET SECTION 1 - CHEMICAL PRODUCT AND COMPANY INDENTIFICATION PRODUCT NAME: 5543 ENGINE OIL ADDITIVE IDENTIFICATION F01956 DATE PRINTED: 08/27/10 NUMBER: PRODUCT USE/CLASS: ENGINE OIL ADDITIVE MANUFACTURED FOR: MANUFACTURED BY: IMPERIAL, INCORPORATED AMERICAN JETWAY CORPORATION 789 PACKER DRIVE 34136 MYRTLE STREET P.O. BOX 11008 WAYNE, MICHICAN 48184-0126 GREEN BAY, WISCONSIN 54307 PHONE: 920-494-7474 EMERGENCY TELEPHONE : 920-494-7474 EMERGENCY AGENCY: CHEMTREC MON-FRI/8:00 AM - 5:00 PM 1-800-424-9300 (24 HOURS) PREPARER: REGULATORY AFFAIRS, PHONE: , PREPARE DATE: 08/27/10 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS ITEM CHEMICAL NAME CAS NUMBER WEIGHT % 01 PETROLEUM OIL MIXTURE <=100 EXPOSURE LIMITS ACGIH OSHA COMPANY ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN 01 N.E. N.E. N.E. N.E. N.E. NO (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION ***EMERGENCY OVERVIEW***: May cause skin irritation. May cause eye irritation. Inhalation of vapors or mists of this product may be irritating to the respiratory system. EFFECTS OF OVEREXPOSURE - EYE CONTACT: DIRECT EYE CONTACT MAY CAUSE SLIGHT TEMPORARY IRRITATION EFFECTS OF OVEREXPOSURE - SKIN CONTACT: prolonged contact may be irritating. EFFECTS OF OVEREXPOSURE - INHALATION: Prolonged inhalation may be harmful. Avoid breathing mists from this product. EFFECTS OF OVEREXPOSURE - INGESTION: Ingestion is not considered to be a hazard encountered in normal industrial use. EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: No Information. PRIMARY ROUTE (S) OF ENTRY: SKIN CONTACT EYE CONTACT SECTION 4 - FIRST AID MEASURES FIRST AID - EYE CONTACT: Holding eyelids open, flush eyes with running water for 5 minutes. Remove contact lenses if wearing and flush open eyes with running water for at least 15 minutes. Seek medical attention. FIRST AID - SKIN CONTACT: Wash with soap and large amounts of water. Remove contaminated clothing. Get medical attention if irritation develops or persists. Wash contaminated clothing before re-use. FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. FIRST AID - INGESTION: Not expected to be acutely toxic. If large amounts are swallowed, immediately call a physician. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: >350 F LOWER EXPLOSIVE LIMIT: N.A. UPPER EXPLOSIVE LIMIT: N.A. AUTOIGNITION TEMPERATURE: ND EXTINGUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL FOAM WATER FOG UNUSUAL FIRE AND EXPLOSION HAZARDS: No Information. SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if exposed to heat (fire). As in any fire, wear self-contained breathing apparatus pressure-demand. (MSHA/NIOSH approved or equivalent) and full protective gear. SECTION 6 - ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. SECTION 7 - HANDLING AND STORAGE HANDLING: Wash thoroughly after handling. STORAGE: Keep from freezing. KEEP OUT OF THE REACH OF CHILDREN! SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: No Information. RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. SKIN PROTECTION: Impervious gloves should be used. EYE PROTECTION: Wear safety glasses with side shields (or goggles) and a face shield. OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE FOLLOWED. HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they may retain product residues. Avoid prolonged or repeated contact with skin. Avoid breathing vapors from heated material. Avoid contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE: N.A. VAPOR DENSITY: Is heavier than air ODOR: MILD ODOR THRESHOLD: ND APPEARANCE: AMBER LIQUID EVAPORATION RATE: Is slower than Butyl Acetate SOLUBILITY IN H2O: NIL FREEZE POINT: ND SPECIFIC GRAVITY: 0.8886 VAPOR PRESSURE: ND pH @ 0.0 %: NA PHYSICAL STATE: LIQUID VISCOSITY: ND COEFFICEINT OF WATER/OIL DISTRIBUTION: ND VOC, % (wt): 0.00 % (See Section 16 for abbreviation legend) SECTION 10 - STABILITY AND REACTIVITY CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES. INCOMPATIBILITY: AVOID CONTACT WITH STRONG OXIDIZERS. HAZARDOUS DECOMPOSITION PRODUCTS: SMOKE, OXIDES OR CARBON AND OXIDES OF NITROGEN, PHOSPHOROUS, AND/OR SULFUR ARE POSSIBLE. HAZARDOUS POLYMERIZATION: Will not occur under normal conditions. STABILITY: This product is stable under normal storage conditions. SECTION 11 - TOXICOLOGICAL PROPERTIES No product or component toxicological information is available. SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No Information. SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL REGULATIONS. SECTION 14 - TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME: NOT REGULATED DOT TECHNICAL NAME: DOT HAZARD CLASS: HAZARD SUBCLASS: DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE: DOT EXEMPTIONS: DOT SPECIAL INSTRUCTIONS: IMDG SHIPPING INFORMATION: IMDG PROPER SHIPPING NAME: NOT REGULATED IMDG TECHNICAL NAME: IMDG HAZARD CLASS: HAZARD SUBCLASS: PACKING GROUP: FLASH POINT, C: IMDG EXEMPTIONS: IMDG SPECIAL INSTRUCTIONS: MARINE POLLUTANT (YES/NO): IATA SHIPPING INFORMATION: IATA PROPER SHIPPING NAME: NOT REGULATED IATA TECHNICAL NAME: IATA HAZARD CLASS: HAZARD SUBCLASS: PACKING GROUP: IATA EXEMPTIONS: IATA SPECIAL INSTRUCTIONS: SECTION 15 - REGULATORY INFORMATION U.S. FEDERAL REGULATIONS: AS FOLLOWS - OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) CERCLA - SARA HAZARD CATEGORY: This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: None SARA SECTION 313: This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CRF Part 372: CHEMICAL NAME CAS NUMBER WT/WT % IS LESS THAN No SARA Section 313 components exist in this product. TOXIC SUBSTANCES CONTROL ACT: This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States: CHEMICAL NAME CAS NUMBER No information is available. U.S. STATE REGULATIONS: AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW: The following materials are non-hazardous, but are among the top five components in this product: CHEMICAL NAME CAS NUMBER No non-hazardous materials are among the top five ingredients. PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous ingredients are present in the product at greater than 3%: CHEMICAL NAME CAS NUMBER No non-hazardous ingredients are present at greater than 3%. CALIFORNIA PROPOSITION 65: WARNING: The chemical(s) noted below and contained in this product, are known to the state of California to cause cancer, birth defects or other reproductive harm: CHEMCIAL NAME CAS NUMBER No Proposition 65 chemicals exist in this product. INTERNATIONAL REGULATIONS: AS FOLLOWS - CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS: D2B SECTION 16 - OTHER INFORMATION HMIS RATING - HEALTH: 1 FLAMMABILITY: 1 REACTIVITY: 0 PREVIOUS MSDS REVISION DATE: 08/27/10 REASON FOR REVISION: NEW PRODUCT LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined *****THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION*** The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations. <END OF MSDS>
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.