Product Categories See All
Track Order Status
SDS Sheet 0052204Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Fabric Product Name: Oil-Only Sorbent CAS No: 9003-07-0 Synonyms: Pad, nonwoven 1.2. Intended Use of the Product Use of the substance/mixture: Designed to absorb various oils such as lubricants, fuels, mineral and vegetable oils. For professional use only. 1.3. Name, Address, and Telephone of the Responsible Party Company NPS Corporation 3303 Spirit Way Green Bay, WI 54304 Phone: 800-558-5066 1.4. Emergency Telephone Number Emergency | CHEMTREC: (800) 424-9300 (USA); +1 (703) 527-3887 (International number |and Maritime) SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Not classified| | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |None Signal Word (GHS-US) |None Hazard Statements (GHS-US) |None Precautionary Statements |None (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: Exposure may aggravate those with pre-existing eye, skin, or respiratory conditions. 2.4. Unknown Acute Toxicity (GHS-US) Not available SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) Polypropylene |(CAS No) 9003-07-0 |100 |Not classified | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label if possible). First-aid Measures After Inhalation: Not expected to be a primary route of exposure. First-aid Measures After Skin Contact: Not expected to present a significant dermal hazard under anticipated conditions of normal use. First-aid Measures After Eye Contact: Rinse with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention if irritation develops or persists. First-aid Measures After Ingestion: Do NOT induce vomiting. Rinse mouth. Immediately call a POISON CENTER or doctor/physician. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Not expected to present a significant hazard under anticipated conditions of normal use. Symptoms/Injuries After Inhalation: Not expected to be a primary route of exposure. Symptoms/Injuries After Skin Contact: Not expected to present a significant dermal hazard under anticipated conditions of normal use. Symptoms/Injuries After Eye Contact: May cause eye irritation. Symptoms/Injuries After Ingestion: Ingestion is likely to be harmful or have adverse effects. Chronic Symptoms: None expected under normal conditions of use. 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed If you feel unwell, seek medical advice (show the label where possible). SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use extinguishing media appropriate for surrounding fire. Unsuitable Extinguishing Media: Do not use a heavy water stream. Use of heavy stream of water may spread fire. 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Not considered flammable but may burn at high temperatures. Explosion Hazard: Product itself is not explosive. Reactivity: Hazardous reactions will not occur under normal conditions. 5.3. Advice for Firefighters Precautionary Measures Fire: Exercise caution when fighting any chemical fire. Firefighting Instructions: Use water spray or fog for cooling exposed containers. Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: No special measures required. 6.1.1. For Non-emergency Personnel Protective Equipment: Use appropriate personal protection equipment (PPE). Emergency Procedures: Evacuate unnecessary personnel. 6.1.2. For Emergency Responders Protective Equipment: Equip cleanup crew with proper protection. Emergency Procedures: Eliminate ignition sources. Ventilate area. 6.2. Environmental Precautions Prevent entry to sewers and public waters. 6.3. Methods and Material for Containment and Cleaning Up For Containment: Contain and collect as any solid. Methods for Cleaning Up: Dispose of waste safely. Transfer spilled material to a suitable container for disposal. Contact competent authorities after a spill. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: None. Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Comply with applicable regulations. Storage Conditions: Keep/Store away from direct sunlight, extremely high temperatures, and incompatible materials. Incompatible Materials: Strong oxidizers. 7.3. Specific End Use(s) Designed to absorb various oils such as lubricants, fuels, mineral and vegetable oils. For professional use only. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters No Occupational Exposure Limits (OELs) have been established for this product or its chemical components. 8.2. Exposure Controls Appropriate Engineering |Ensure all national/local regulations are observed. Controls | Personal Protective Equipment|Not required for normal conditions of use. Materials for Protective |Not required for normal conditions of use. Clothing | Hand Protection |Not required for normal conditions of use. Eye Protection |Not required for normal conditions of use. Skin and Body Protection |Not required for normal conditions of use. Respiratory Protection |Not required for normal conditions of use. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Solid Appearance |White or colored fabric or particulate Odor |Odorless Odor Threshold |Not available pH |Not available Relative Evaporation Rate |Not available (butylacetate=1) | Melting Point |177 Â°C (350 Â°F) Freezing Point |Not available Boiling Point |Not available Flash Point |625 Â°C (1157 Â°F) Auto-ignition Temperature |Not available Decomposition Temperature |Not available Flammability (solid, gas) |Not available Vapor Pressure |Not available Relative Vapor Density at 20 Â°C |Not available Relative Density |Not available Specific Gravity |0.9 Solubility |Insoluble Partition coefficient: |Not available n-octanol/water | Viscosity |Not available Lower Flammable Limit |Not available Upper Flammable Limit |Not available 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Hazardous reactions will not occur under normal conditions. 10.2 Chemical Stability Stable under recommended handling and storage conditions (see section 7). 10.3 Possibility of Hazardous Reactions Hazardous polymerization will not occur. 10.4 Conditions to Avoid Extremely high or low temperatures. Incompatible materials. Ignition sources. 10.5 Incompatible Materials Strong oxidizers. 10.6 Hazardous Decomposition Products Carbon oxides (CO, CO2). SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: Not classified Skin Corrosion/Irritation: Not available Serious Eye Damage/Irritation: Not classified Respiratory or Skin Sensitization: Not classified Germ Cell Mutagenicity: Not classified Carcinogenicity: Not classified Reproductive Toxicity: Not classified Specific Target Organ Toxicity (Single Exposure): Not classified Specific Target Organ Toxicity (Repeated Exposure): Not classified Aspiration Hazard: Not classified Symptoms/Injuries After Inhalation: Not expected to be a primary route of exposure. Symptoms/Injuries After Skin Contact: Not expected to present a significant dermal hazard under anticipated conditions of normal use. Symptoms/Injuries After Eye Contact: May cause eye irritation. Symptoms/Injuries After Ingestion: Ingestion is likely to be harmful or have adverse effects. Chronic Symptoms: None expected under normal conditions of use. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity Not classified 12.2. Persistence and Degradability Not available 12.3. Bioaccumulative Potential Not available 12.4. Mobility in Soil Not available 12.5. Other Adverse Effects Other Information: Avoid release to the environment. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Dispose of waste material in accordance with all local, regional, national, and international regulations. Additional Information: Ecology - Waste Materials: Avoid release to the environment. SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated for transport Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name |Not regulated for transport Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name |Not regulated for transport Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> Polypropylene (9003-07-0) Listed on the United States TSCA (Toxic Substances Control Act) inventory SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) | 15.2 US State Regulations <COMPONENT> Neither this product nor its chemical components appear on any US state lists. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |09/08/2014 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.