Product Categories See All
Track Order Status
SDS Sheet 0052080Printer Friendly View
Safety Data Sheet | | Date of Issue: June 2011 |Revision Date: June 2011 |Revision Number: Imperial Supplies Part Number: 0052080 SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Sorbent Socks - White Oil-only CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Sorbent Media 1.3. Name, Address, and Telephone of the Responsible Party Company Evolution Sorbent Products, LLC 1270 Nuclear Drive West Chicago, IL 60185 Phone: 630-293-8055 1.4. Emergency Telephone Number Emergency |1-800-615-8699 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) | | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) | | | | | | Signal Word (GHS-US) | Hazard Statements (GHS-US) | Precautionary Statements | (GHS-US) | 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) Polypropylene |9003-07-0 |49% | Cellulose Fibers |Not available |48% | Polyester |9004-34-6 |3% | | | | | | | Not a Hazardous Material under WHMIS. SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: No special procedures required. First-aid Measures After Inhalation: First-aid Measures After Skin Contact: First-aid Measures After Eye Contact: First-aid Measures After Ingestion: 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Water, Foam, COÂ², Dry Chemical. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Some carbon monoxide formation is possible under oxygen-lean conditions. Explosion Hazard: Sorbent product will not support combustion. Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Standard procedures for class A fires. Firefighting Instructions: Protection During Firefighting: SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: No special steps to be taken if material is spilled or released. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Store in a dry area. Do not store near open flame, high heat or strong oxidants. Polypropylene/synthetic fibers, when heated, become very sticky and will burn. Use self-contained air masks to enter smoky area in the event of fire. Hygiene Measures: 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering | Controls | Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection |None required. Eye Protection |None required. Skin and Body Protection |None required. Respiratory Protection |None required. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State | Appearance |White tube & virtually odor free Odor |virtually Odor free Odor Threshold | pH | Relative Evaporation Rate |Not Applicable (butylacetate=1) | Melting Point |>160Â°C Freezing Point | Boiling Point |Not Applicable Flash Point |>329Â°C (625Â°F) Auto-ignition Temperature | Decomposition Temperature | Flammability (solid, gas) | Vapor Pressure |Not Applicable Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity |0.88-.092 Solubility |Insoluble Partition coefficient: | n-octanol/water | Viscosity | Lower Flammable Limit | Upper Flammable Limit | 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Stable (XX) 10.2 Chemical Stability 10.3 Possibility of Hazardous Reactions 10.4 Conditions to Avoid None 10.5 Incompatible Materials Avoid contact with hot or concentrated nitric and perchloric acid, sulfuric acid or 98% sulfuric acid at 60Â°C or above 10.6 Hazardous Decomposition Products Will not occur. (XX) SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: None. Skin Corrosion/Irritation: Serious Eye Damage/Irritation: Respiratory or Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: None. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential 12.4. Mobility in Soil 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: Sanitary landfill or incineration site. Disposal must be done in accordance with local, state, and federal regulations. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name | Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> SARA Section 311/312 Hazard Classes | Toxic Substances Control Act (TSCA) | 15.2 US State Regulations <COMPONENT> SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |June 2011 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.