Product Categories See All
Track Order Status
MSDS Sheet 0047390Printer Friendly View
MATERIAL SAFETY DATA SHEET SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: : BRAKE CLEANER (10% VOC) CC2011 IDENTIFICATION NUMBER : XP00603 DATE PRINTED: 04/13/11 PRODUCT USE/CLASS : BRAKE CLEANER MANUFACTURERED FOR: FOR PRODUCT TEST SAMPLE ONLY MANUFACTURERED BY: DO NOT USE FOR ANY OTHER CODED AMERICAN JETAWAY CORPORATION PRODUCT THAT IS DIFFERENT FROM 34136 MYRTYLE STREET ABOVE LISTED IDENTIFICATION NUMBER. WAYNE, MICHIGAN 48184-0126 EMERGENCY TELEPHONE NUMBER: EMERGENCY AGENCY: CHEMTREC 1-800-424-9300 (24 HOURS) PREPARER: CUSTOMER SERVICE, PHONE: , PREPARE DATE: 04/13/11 SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS ITEM --------------------CHEMICAL CAS NUMBER WEIGHT % NAME---------------------- 01 2 - PROPANONE 67-64-1 70-80 02 METHYL ACETATE 79-20-9 10-20 03 XYLENE 1330-20-7 1-10 04 ETHYLBENZENE 100-41-4 1-10 05 PARAFFINIC SOLVENT 64742-47-8 1-10 -----------------------------------------EXPOSURE LIMITS----------------------------------------- ACGIH OSHA COMPANY ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN 01 500 PPM 750 PPM 1000 PPM N.E. N.E. NO 02 200 PPM 250 PPM 200 PPM N.E. N.E. NO 03 100 PPM 150 PPM 100 PPM N.E. N.E. NO 04 100 PPM 125 PPM 100 PPM N.E. N.E. YES 05 N.E. N.E. N.E. N.E. N.E. NO (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION *** EMERGENCY OVERVIEW ***: Harmful if inhaled. Causes eye irritation. Extremely flammable liquid and vapor. Vapors may cause flash fire or explosion. Aspiration hazard. HARMFUL OR FATAL IF SWALLOWED. MAY ENTER LUNGS AND CAUSE DAMAGE. EFFECTS OF OVEREXPOSURE - EYE CONTACT: DIRECT EYE CONTACT MAY CAUSE SLIGHT TEMPORARY IRRITATION. CONTACT WITH EYES MAY CAUSE IRRITATION. Causes moderate to severe eye irritation. EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). Prolonged contact may cause skin irritation with local redness. EFFECTS OF OVEREXPOSURE - INHALATION: Harmful if inhaled. Headaches, dizziness, nausea, decreased blood pressure, changes in heart rate and cyanosis may result from over-exposure to vapor or skin exposure. Prolonged inhalation may be harmful. INHALING LARGE QUANTITIES OF MIST OR VAPORS MAY CAUSE SOME IRRITATION TO NOSE, THROAT, LUNGS. Avoid breathing mists from this product. Gross overexposure may cause: Central nervous system depression with dizziness, confusion, incoordination, drowsiness or unconsciousness. Irregular heart beat with a strange sensation in the chest, "heart thumping", apprehension, lightheadedness, feeling of fainting, dizziness, weakness, sometimes progressing to loss of consciousness and death. Suffocation, if air is displaced by vapors. EFFECTS OF OVEREXPOSURE - INGESTION: Ingestion is not considered to be a hazard encountered in normal industrial use. This material may be harmful or fatal if swallowed. Aspiration hazard. Depression of the central nervous system can occur. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Overexposure may cause nervous system damage. Overexposure may cause lung damage. Repeated contact with skin may irritate pre-existing skin conditions. PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT SKIN ABSORBENT INHALATION INGESTION EYE CONTACT SECTION 4 - FIRST AID MEASURES FIRST AID - EYE CONTACT: Holding eyelids open, flush eyes with running water for 5 minutes. Remove contact lenses if wearing and flush open eyes with running water for at least 15 minutes. Seek medical attention. FIRST AID - SKIN CONTACT: Wash with soap and large amounts of water. Remove contaminated clothing. Get medical attention if irritation develops or persists. Wash contaminated clothing before re-use. FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. FIRST AID - INGESTION: If swallowed, do NOT induce vomiting. Call physician immediately. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: -4 F LOWER EXPLOSIVE LIMIT: 0.8% UPPER EXPLOSIVE LIMIT: 16.0% AUTOIGNITION TEMPERATURE: N.D. EXTINGUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL FOAM WATER FOG UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors may form explosive mixture with air. Extremely Flammable. Material will readily ignite at room temperatures in the presence of an ignition source. "Empty" containers retain product residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if exposed to heat (fire). As in any fire, wear self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Water runoff can cause environmental damage. Dike and collect water used to fight fire. Keep containers and surroundings cool with water spray. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas. SECTION 6 - ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Use recommended personal protective equipment. Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Wear a self-contained breathing apparatus and appropriate personal protective equipment. (See Exposure Controls/Personal Protection Section) Do not flush into surface water or sanitary sewer system. SECTION 7 - HANDLING AND STORAGE AEROSOL LEVEL: N.A. HANDLING: Ensure all equipment is electrically grounded before beginning transfer operations. Use only in a well-ventilated area. STORAGE: Keep away from heat, sparks and flame. Keep container closed when not in use. KEEP OUT OF THE REACH OF CHILDREN. SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any air contaminants to within their TLVs during the use of this product. Use explosion-proof ventilation equipment. RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. SKIN PROTECTION: Impervious gloves should be used. EYE PROTECTION: Wear safety glasses with side shields or goggles when using this product. OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE FOLLOWED. HYGIENIC PRACTICES: Wash hands before eating. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they retain product residues. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid prolonged or repeated contact with skin. Avoid contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE : 132-550 F VAPOR DENSITY : Is heavier than air ODOR : SOLVENT ODOR THRESHOLD : N.D. APPEARANCE : CLEAR EVAPORATION RATE : Is faster than Butyl SOLUBILITY IN H2O : NEGLIGIBLE Acetate FREEZE POINT : N.D. SPECIFIC GRAVITY : 0.8112 VAPOR PRESSURE : N.D. pH @ 0.0% : N.A. PHYSICAL STATE : LIQUID VISCOSITY : N.D. COEFFICIENT OF WATER/OIL DISTRICUTION: N.D. VOC, % (wt): 9.75% (See section 16 for abbreviation legend) SECTION 10 - STABILITY AND REACTIVITY CONDITIONS TO AVOID: AVOID OPEN FLAMES AND HIGH TEMPERATURES. Avoid contact with strong oxidizing agents. INCOMPATIBILTY: MAY REACT WITH OXYGEN AND STRONG OXIDIZING AGENTS SUCH AS CHLORATES, NITRATES, PEROXIDES, ETC. AVOID CONTACT WITH STRONG OXIDIZERS. Avoid contact with strong reducing agents. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon Monoxide, carbon dioxide, smoke, fumes. HAZARDOUS POLYMERIZATION: Will not occur under normal conditions. STABILITY: This product is stable under normal storage conditions. SECTION 11 - TOXICOLOGICAL PROPERTIES PRODUCT LD50: >3500 mg/kg PRODUCT LC50: >16000 ppm COMPONENT TOXICOLOGICAL INFORMATION: -------------------CHEMICAL -----------LD50-- -----------LC50----- NAME------------------------- -------- ------- 2-PROPANONE 5800 MG/KG/RAT 50100 MG/M3/8H/RAT METHYL ACETATE 6970 MG/KG/RAT >16000 PPM/4H/RAT XYLENE 4300 MG/KG/RAT 30000 MG/M3/MAMMAL ETHYLBENZENE 3500 MG/KG/RAT NE PARAFFINIC SOLVENT ND ND SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No Information. SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS. SECTION 14 - TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME: CONSUMER COMMODITY DOT TECHNICAL NAME: DOT HAZARD CLASS: ORM-D HAZARD SUBCLASS: DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE: DOT EXEMPTIONS: DOT SPECIAL INSTRUCTIONS: IMDG SHIPPING INFORMATION: UN1993 IMDG PROPER SHIPPING NAME: FLAMMABLE LIQUIDS, N.O.S. IMDG TECHNICAL NAME: ACETONE IMDG HAZARD CLASS: 3 HAZARD SUBCLASS: PACKING GROUP: II FLASH POINT, C: -20 IMDG EXEMPTIONS: LIMITED QUANTITY IMDG SPECIAL INSTRUCTIONS: MARINE POLLUTATNT (YES/NO): N IATA SHIPPING INFORMATION: UN1993 IATA PROPER SHIPPING NAME: FLAMMABLE LIQUIDS, N.O.S. IATA TECHNICAL NAME: ACETONE IATA HAZARD CLASS: 3 HAZARD SUBCLASS: PACKING GROUP: II IATA EXEMPTIONS: LIMITED QUANTITY IATA SPECIAL INSTRUCTIONS: SECTION 15 - REGULATORY INFORMATION U.S. FEDERAL REGULATIONS: AS FOLLOWS - OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) CERCLA - SARA HAZARD CATEGORY: This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD SARA SECTION 313: This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: -------------------CHEMICAL CAS NUMBER WT/WT % IS LESS THAN NAME--------------------- XYLENE 1330-20-7 1-10 ETHYLBENZENE 100-41-4 1-10 TOXIC SUBSTANCES CONTROL ACT: This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States: -------------------CHEMICAL CAS NUMBER NAME--------------------- METHYL ACETATE 79-20-9 U.S. STATE REGULATIONS: AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW: The following materials are non-hazardous, but are among the top five components in this product: -------------------CHEMICAL CAS NUMBER NAME--------------------- No non-hazardous materials are among the top five ingredients. PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous ingredients are present in the product at great than 3%: -------------------CHEMICAL CAS NUMBER NAME--------------------- No non-hazardous ingredients are present at greater than 3%. SECTION 15 - REGULATORY INFORMATION CALIFORNIA PROPOSITION 65: WARNING: The chemical(s) noted below and contained in this product, are known to the state of California to cause cancer, birth defects or other reproductive harm: -------------------CHEMICAL CAS NUMBER NAME--------------------- EHTYLBENZENE 100-41-4 TOLUENE 108-88-3 BENZENE 71-43-2 INTERNATIONAL REGULATIONS: AS FOLLOWS - CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS: No information available. SECTION 16 - OTHER INFORMATION HMIS RATINGS - HEALTH: 2 FLAMMABILITY: 4 REACTIVITY: 0 PREVIOUS MSDS REVISION DATE: 4/13/11 REASON FOR REVISION: NEW PRODUCT LEGEND: N.A. - Not Applicable, N.E. - Not Established N.D. - Not Determined *** THIS MSDS IS NOT FOR REPRODUCTION OR DISTRIBUTION *** The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations.
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.