Product Categories See All
Track Order Status
Sheet 0046664Printer Friendly View
MATERIAL SAFETY DATA SHEET Spray Chain Lube Health: 0 Flammability: 2 Instability: 0 Special: - Printed: 02/28/2005 Revision: 02/28/2005 Supercedes Revision; 02/21/2005 Date Created: 02/21/2005 1. PRODUCT AND COMPANY IDENTIFICATION Product Code: 4666-4 & 4766 Product Name: Spray Chain Lube Reference #; Lab 507 Manufacturer Information Company Name; Imperial Supplies LLC 789 Packer Drive P.O. Box 11008 Green Bay., WI 54307-1008 Emergency Contact: Chem Tel (800) 255-3924 Information: (800) 558-2808 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Components CAS # Percentage OSHA ACGIH Other (Chemical Name) PEL TLV Limits -------------------------------------------------------------------------------- 1. Hydro treated light 64742-47-8 12.0-18.0% No data No data No data distillate (petroleum) 2. Nonanes NA 2.4-6.5% No data No data No data 3. C10 Alkenes, Isoparaffins NA 4.5-11.0% No data No data No data and Cycloalkanes 4. C11 Alkenes, Isoparaffins, NA 1.8-5.0% No data No data No data and Cycloalkanes 5. C12 Alkenes, Isoparaffins, NA 0.1-3.0% No data No data No data and Cycloalkanes 6. Mineral oil 64741-88-4 35.0-55.0% No data No data No data 7. Solvent refined residuum 64742-01-4 20.0-45.0% No data No data No data Hazardous Components RTECS# OSHA OSHA ACGIH ACGIH (Chemical Name) STEL CEIL STEL CEIL -------------------------------------------------------------------------------- 1. Hydro treated light OA5504000 No data No data No data No data distillate (petroleum) 2. Nonanes NA No data No data No data No data 3. C10 Alkenes, Isoparaffins, NA No data No data No data No data and Cycloalkanes 4. C11 Alkenes, Isoparaffins, NA No data No data No data No data and Cycloalkanes 5. C12 Alkenes, Isoparaffins, NA No data No data No data No data and Cycloalkanes 6. Mineral Oil PY8040501 No data No data No data No data 7. Solvent refined NA No data No data No data No data residuum 3. HAZARDS IDENTIFICATION Emergency Overview WARNING! Combustible liquid: vapor may cause flash fire! Mist or vapor may irritate the eyes, mucous membranes, and respiratory tract! Liquid contact may cause minimal to moderate eye and/or moderate to severe skin irritation and inflammation! May be harmful if inhaled or absorbed through the skin! Overexposures may cause central nervous system (CNS) depression and/or other target organ effects! May be harmful or fatal if ingested! Aspiration into the lungs can cause pulmonary edema and chemical pneumonia! Spills may create a slipping hazard! Route(s) of Entry: Inhalation? Yes Skin? Yes Eyes? Yes Ingestion? Yes Potential Health Effects (Acute and Chronic) Inhalation: Breathing high concentrations of vapor may cause respiratory irritation, euphoria, excitation or giddiness, headache, nausea, vomiting, abdominal pain. loss of appetite, fatigue, muscular weakness, staggering gait, and central nervous system (CNS) depression. CNS effects include dizziness, drowsiness, disorientation, vertigo, memory loss, visual disturbances, difficulty with breathing, convulsions, unconsciousness, paralysis, coma, and even death, depending upon the level of exposure concentration and/or duration. Vapors can reduce the oxygen content in air. Approximately 20,000 ppm (or 2 vol %) in air is fatal to humans in 5 to 10 minutes. Sudden death from cardiac arrest (heart attack) may result from exposure to 5,000 ppm for only 5 minutes. Oxygen deprivation is possible if working in confined spaces. Eye Contact: Animal test results on similar materials suggest that this product can cause minimal to moderate eye irritation upon short-term exposure. Symptoms include stinging, watering, redness, and swelling. Skin Contact: Animal test results on similar materials suggest that this product can cause moderate skin irritation. Short-term contact symptoms include redness, itching, and burning of the skin. This material may also be absorbed through the skin and produce CNS depression effects (see "inhalation" above). If the skin is damaged, absorption increases. Prolonged and/or repeated contact may cause moderate to severe dermatitis. Chronic symptoms may include drying, swelling, scaling, blistering, cracking, and severe tissue damage. Ingestion; If swallowed, this material may irritate the mucous membranes of the mouth, throat, and esophagus. It can be readily absorbed by the stomach and intestinal tract. Symptoms include a burning sensation of the mouth and esophagus, nausea, vomiting, dizziness, staggering gait, drowsiness, loss of consciousness, and delirium, as well as additional central nervous system (CNS) effects (see "inhalation' above). Due to its light viscosity, there is a danger of aspiration into the lungs during vomiting. Aspiration can result in severe lung damage or death. Progressive CNS depression, respiratory insufficiency, and ventricular fibrillation may also result in death. Chronic Health Effects Summary: Chronic effects of ingestion and subsequent aspiration into the lungs may cause pneumatic (lung cavity) formation and chronic lung dysfunction. Reports have associated repeated and prolonged occupational overexposure to solvents with irreversible brain and nervous system damage (sometimes referred to as "Solvent or Painter's Syndrome"). Intentional misuse by deliberately concentrating and inhaling this product may be harmful or fatal. Signs and Symptoms Of Exposure No data available. Medical Conditions Generally Aggravated By Exposure Personnel with pre-existing central nervous system (CNS) disease, neurological conditions, skin disorders, chronic respiratory diseases, or impaired liver or kidney function should avoid exposure. OSHA Hazard Classes; HEALTH HAZARDS; Irritant PHYSICAL HAZARDS; Compressed Gas TARGET ORGANS & EFFECTS; Longs, Kidney, Eyes, Skin, Liver, Central Nervous System, Mucous Membranes, Respiratory System. 4. FIRST AID MEASURES Emergency and First Aid Procedures Inhalation; Immediately move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If heart has stopped, immediately begin cardiopulmonary resuscitation (CPR). If breathing is difficult, 100 percent humidified oxygen should be administered by a qualified individual. Seek medical attention immediately. Eye Contact: Check for and remove contact lenses. If irritation or redness develops, flush eyes with cool, clean, low pressure water for at least 15 minutes. Hold eyelids apart to ensure complete irrigation of the eye and eyelid tissue. Do not use eye ointment. Seek medical attention immediately. Skin Contact: Remove contaminated shoes and clothing. Flush affected area with large amounts of water. If skin surface is damaged, apply a clean dressing and seek medical attention. Do not use ointments. If skin surface is not damaged, clean affected area thoroughly with mild soap and water. Seek medical attention if tissue appears damaged or if pain or irritation persists. Ingestion: Do not induce vomiting or give anything by mouth. If spontaneous vomiting is about to occur, place victim's head below knees. If victim is drowsy or unconscious, place on the left side with head down. Never give anything by mouth to a person who is not fully conscious. Do not leave victim unattended. Seek medical attention immediately. Note to Physician Inhalation over exposure can produce toxic effects. Monitor for respiratory distress. If cough or difficulty in breathing develops, evaluate for upper respiratory tract inflammation, bronchitis, and pneumonitis. Vigorous anti-inflammatory/ steroid treatment may be required at first evidence of upper airway or pulmonary edema. Administer 100 percent humidified supplemental oxygen with assisted ventilation, as required. If ingested, this material presents a significant aspiration/chemical pneumonitis hazard. As a result, induction of emesis is not recommended. Administer an aqueous slurry of activated charcoal followed by a cathartic such as magnesium citrate or orbital. Also, treatment may involve careful gastric lavage if performed soon after ingestion or in patients who are comatose or at risk of convulsing. Protect the airway by cuffed end tracheal intubations or by placement of the body in a Trendelenburg and left lateral decubitus position. Obtain check X-ray and liver function tests. Monitor for cardiac function, respiratory distress and arterial blood gases in severe exposure cases. 5. FIRE FIGHTING MEASURES Flash Pt: 146.00 F (63.3 C) Method Used: PMCC Explosive Limits: LEL; No data UEL; No data. Auto ignition Pt; 230.00 C (446.0 F) Fire Fighting Instructions No data available. Flammable Properties and Hazards Combustible liquid! This material releases vapors at or approaching its flash point temperature. When mixed with air in certain proportions and exposed to an ignition source, its vapor can cause a flare fire. Use only with adequate ventilation. Vapors are heavier than air and may travel long distances along the ground to an ignition source and flash back. May create vapor/air explosion hazard in confined spaces such as sewers. If container is not properly cooled, it can rupture in the heat of a fire. Hazardous Combustion Products Burning or excessive heating may produce smoke, carbon dioxide, and possibly other harmful gases/vapors. Extinguishing Media SMALL FIRE; Use dry chemicals, carbon dioxide (CO2), foam, water fog, or inert gas (nitrogen). LARGE FIRE; Use foam, water fog, or water spray. Water fog and spray are effective in cooling and adjacent structures but might cause frothing and/or may not achieve extinguishment. A water jet may be used to cool the vessel's external walls to prevent pressure build-up, auto ignition, or explosion. NEVER use a water jet directly on the fire because it may spread the fire to a larger area. Unsuitable Extinguishing Media No data available. 6. ACCIDENTAL RELEASE MEASURES Steps To Be Taken In Case Material Is Released Or Spilled Combustible liquid! Release causes an immediate fire or explosion hazard. Evacuate all non-essential personnel from immediate area and establish a "regulated zone" with site control and security. A vapor-suppressing foam may be used to reduce vapors. Eliminate all ignition sources. All equipment used when handling this material must be grounded. Stop the leak if it can be done without risk. Do not touch or walk through spilled material. Remove spillage immediately from hard, smooth walking area. Prevent its entry into waterways, sewers, basements, or confined areas. Absorb or cover with dry earth, sand, or other non-combustible material and transfer to appropriate waste containers. Use clean, non-sparking tools to collect absorbed material. For large spills, secure the area and control access. Dike far ahead of a liquid spill to ensure complete collection. Water mist or spray may be used to reduce or disperse vapors: but, it may not prevent ignition in closed spaces. This material will float on water and its run-off may create an explosion or fire hazard. Verify that responders are properly HAZWOPER-trained and wearing appropriate respiratory equipment and fire resistant protective clothing during cleanup operations. In an urban area, cleanup spill as soon as possible: in natural environments, cleanup on advise from specialists. Pick up free liquid for recycle and/or disposal if it can be accomplished safely with explosion-proof equipment. Collect any excess material with absorbent pads, sand, or other inert non-combustible absorbent materials. Place into appropriate waste containers for later disposal. Comply with all laws and regulations. 7. HANDLING AND STORAGE Precautions To Be Taken In Handling A spill or leak can cause an immediate fire/explosion hazard. Keep containers closed and do not handle or store near heat, sparks or any other potential ignition sources. Bond and ground all equipment before transferring this material from one container to another. Do not contact with oxidizable materials. Do not breathe vapor. Use only with adequate ventilation/personal protection. Never siphon by mouth. Avoid contact with eyes, skin, and clothing. Prevent contact with food, chewing, or smoking materials. Do not take internally. When performing repairs and maintenance on contaminated equipment, keep unnecessary persons away from the area. Eliminate all potential ignition sources. Drain and purge equipment, as necessary, to remove material residues. Use gloves constructed of impervious materials and protective clothing if direct contact is anticipated. Provide ventilation to maintain exposure potential below applicable exposure limits. Promptly remove contaminated clothing. Wash exposed skin thoroughly with soap and water after handling. Empty containers may contain material residues which can ignite with explosive force. Misuse of empty containers can be dangerous if used to store toxic, flammable, or reactive materials. Cutting or welding of empty containers can cause fire, explosion, or release toxic fumes from residues. Do not pressurize or expose empty containers to open flame, sparks, or heat. Keep container closed and drum bungs in place. All label warnings and precautions must be observed. Return empty drums to a qualified reconditioner. Consult appropriate federal, state and local authorities before reusing, reconditioning, reclaiming, recycling, or disposing of empty containers and/or waste residues of this material. Precautions To Be Taken in Storing Store and transport in accordance with all applicable laws. Keep containers tightly closed and store in a cool, dry, well ventilated place, plainly labeled, and out of closed vehicles. Keep away from all ignition sources! Ground all equipment containing this material. Containers should be able to withstand pressures expected from warming and cooling in storage. This combustible liquid should be stored in a separate safety cabinet or room. All electrical equipment in areas where this material is stored or handled should be installed in accordance with applicable requirements of the N.F.P.A.'s National Electrical Code (NEC). 8 .EXPOSURE CONTROLS/PERSONAL PROTECTION Respiratory Equipment (Specify Type) For unknown vapor concentrations use a positive-pressure, pressure-demand, self-contained breathing apparatus (SCBA). For known vapor concentrations above the occupational exposure guidelines, use NIOSH-approved organic vapor respirator if adequate protection is provided. Protection factors vary depending upon the type or respirator used. Respirator use should follow OSHA requirements or equivalent standard. Eye Protection Safety glasses with side shields are recommended as a minimum protection. During transfer operations or when there is a likelihood of misting, splashing, or spraying, chemical goggles and face shield should be worn. Suitable eye wash water should be readily available. Protective Gloves Avoid skin contact and use gloves (disposable PVC, neoprene, nit rile, vinyl, or PVC/NBR.) Before eating, drinking, smoking, use of toilet facilities, or leaving work, wash hands with plenty of mild soap and water. DO NOT use gasoline, kerosene, or other solvents, or harsh abrasive skin cleaners. Other Protective Clothing Body Protection: It is recommended that fire-retardant garments (e.g. Nomex � be worn while working with flammable and combustible liquids. If splashing or spraying is expected, chemical resistant protective clothing (Tyvek, nitrile, or neoprene) should be worn. This might include long-sleeves, apron, slicker suit, boots, and additional facial protection. If general contact occurs, IMMEDIATELY removed soaked clothing and take a shower. Contaminated leather goods should be removed and discarded. Engineering Controls (Ventilation etc.) Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapor and/or mists below the pertinent exposure limits. All electrical equipment should comply with the NFPA NEC standards. Ensure that an emergency eye wash station and safety shower are near the work-station location. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical States: [ ] Gas [X] Liquid [ ] Solid Melting Point: -65.00 C (-85.0 F) - 25.00 C (-13.0 F) Boiling Point: 160.00 C (320.0 F) - 200.00 C (392.0 F) Auto ignition Pt: 230.00 C (446.0 F) Flash Pt: 146.00 F (63.3 C) Method: PMCC Explosive Limits; LEL: No data. UEL; No data. Specific Gravity (Water =1): .86 - .88 Vapor Pressure (vs. Air or mm Hg): No data Vapor Density (vs. Air = 1): No data. Evaporation Rate (vs Butyl No data Acetate = 1): Solubility in Water: No data Other Solubility Notes: Insoluble in water. Percent Volatile: No data. VOC / Volume: 15.0000 WT% Corrosion Rate: No data. pH: No data. Appearance and Odor Transparent, colorless liquid. Light paraffin hydrocarbon odor. 10. STABILITY AND REACTIVITY Stability; Unstable [ ] Stable [X] Conditions To Avoid - Instability Keep away from extreme heat, strong acids, and strong oxidizing conditions. Incompatibility - Materials To Avoid Strong acids, alkalies, and oxidizers such as liquid chlorine, hydrogen peroxide, and oxygen. Hazardous Decomposition Or Byproducts No substances are readily identified from composition; but, no degradation data is available. Hazardous Polymerization: Will occur [ ] Will not occur [X] Conditions To Avoid - Hazardous Polymerization No data available. 11. TOXICOLOGICAL INFORMATION Toxicological Information Stoddard solvent or mineral spirits; ORAL (LD50): Acute; GT 34,600 mg/kg [Rat] GAS (LC50); Acute; GT 21,400 mg/m?3 for 4 hours [Rat] DERMAL (LD50): Acute; 15,400 mg/kg [Rabbit] n-Nonane: GAS (LC50): Acute; 3,200 ppm for 4 hours [Rat] INTRAVENOUS (LD50): Acute: 218 mg/kg [Mouse] Chronic Toxicological Effects Stoddard Solvent or Mineral Spirits is a mild to moderate eye irritant and a skin and respiratory tract irritant. Human volunteers exposed to an airborne concentration of 400 ppm experienced no ill effects. Saturated vapors in air (or AP 8,200 mg/m3) are below the LC50 level in rats. Based upon laboratory animal studies, repeated direct application of Stoddard solvent to the skin can produce defatting dermatitis, kidney damage, and changes in blood-forming capacity. Rats developed kidney damage and elevated blood urea nitrogen levels when exposed to a concentration of 1.9 mg/L for 65 days. The kidney damage in rats appeared to involve both tubules and glomerull, but only occurred in males; so these effects may not be pertinent to humans. Male rats exposed to airborne concentrations of 100, 150, and signs of nuerotoxicity. Stoddard solvent and mineral spirits were not mutagenic in the salmonella/micro some (Ames) assay, the in-vitro mouse bone marrow cell chromosome aberrations assay, and the in-vitro rat sister chromatid exchanges assay. Rats inhaling n-nonane at an airborne concentration of 1,500 ppm for 7 days displayed mild tremors and loss of coordination. Inhalation of 1,600 ppm for 6 hours per day for 90 days showed animal weight loss or decreased weight gain and changes in the structure of their salivary glands. And, liver damage and altered response to drugs were seen in rats given n-nonane for 2 to 7 days. Carcinogenicity/Other Information This product does not contain any components at concentrations above 0.1% which are considered carcinogenic by OSHA, IARP, or NTP. Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No 12. ECOLOGICAL INFORMATION Ecological Information Ecotoxicity: Ecological effects testing has been conducted on this material. If spilled, this naphtha, its storage tank, water bottoms and sludge, and any contaminated soil or water may be hazardous to human, animal, and aquatic life. Using rainbow trout, similar naphtha showed a 96-hour TLm 10 ppm to 20 ppm in ambient saltwater. 24-hour TLms resulted in 2,990 ppm and 200 ppm when using bluegill sunfish and juvenile American shad, respectively. Based upon actual spill incident investigations, similar naphtha have been shown to bio accumulate in tissues of various fish from a 1 ppm to 10 pmm level. Environmental Fate: This naphtha is potentially toxic to freshwater and saltwater ecosystems. It will normally float on water with its lighter components evaporating rapidly. In stagnant or slow-moving waterways, a naphtha hydrocarbon layer can cover a large surface area. As a result, this covering layer might limit or eliminate natural atmospheric oxygen transport into the water. With time, if not removed, oxygen depletion in waterway might be enough to cause a fish kill or create an anaerobic environment. This coating action can also be harmful or fatal to plankton, algae, aquatic life, and water birds. Additionally, potable water and boiler feed water systems should NEVER be allowed more than 5 ppm contamination from this material. For additional ecological information concerning components of this product, used should refer to the Hazardous Substances Data Bank and the Oil and Hazardous Materials/Technical Assistance Data System (OHM/TADS) maintained by the U.S. National Library of Medicine. 13. DISPOSAL CONSIDERATIONS Waste Disposal Method Maximize material recovery for reuse or recycling. If spilled material is introduced into a wastewater treatment system, chemical and biological oxygen demand (COD and BOD) will likely increase. This material is biodegradable if gradually exposed to microorganisms, preferably in an aerobic environment. In sewage-seeded waste water, at or below concentrations of 0.2 vol. % of this naphtha, there is little or no effect on bio-oxidation and/or digestion. However, at 1 vol. %, it doubles the required digestion period. Higher concentrations interfere with flock formation and sludge settling and also plug filters or exchange beds. Vapor emissions from a bio-oxidation process contaminated by this material might prove to be a potential health hazard. Recovered non-usable material may be regulated by US EPA as a hazardous Waste due to its ignitibility (D001) characteristics. In addition, conditions of use may cause this material to become a hazardous waste, as defined by Federal or State regulations. It is the responsibility of the user to determine if the material is a RCRA "hazardous waste" at the time of disposal. Transportation, treatment, storage, and disposal of waste material must be conducted in accordance with RCRA regulations (see CFR parts 260 through 271). State and/or local regulations might be even more restrictive. Contact the RCRA/ Superfund hotline at (800) 424-9346 or your regional US EPA office for guidance concerning case specific disposal issues. 14. TRANSPORT INFORMATION LAND TRANSPORT (US DOT) DOT Proper Shipping Name Combustible liquid, n.o.s. (mineral spirits), combustible, NA1993, PG III DOT Hazard Class: Combustible Liquid DOT Hazard Label: None UN/NA Number; NA1993 DOT Packing Group: III Additional Transport Information This product has a flash point temperature of between 141 degrees and 200 degrees F (60.5 degrees to 93 degrees C). For bulk shipments, it is classified as a DOT "Combustible Liquid". However when shipped in non-bulk packages, combustible liquids may be excepted per 49 CFR 173.150 (f)(2). 15. REGULATORY INFORMATION US EPA SARA Title III Hazardous Components CAS # Sec. 302 Sec. 304 Sec. 313 Sec. 110 (Chemical Name) (EHS) RQ (TRI) -------------------------------------------------------------------------------- 1. Hydro treated light 64742-47-8 No No No No distillate (petroleum) 2. Nonanes NA No No No No 3. C10 Alkenes, Isoparaffins, NA No No No No and Cycloalkanes 4. C11 Alkenes, Isoparaffins, NA No No No No and Cycloalkanes 5. C12 Alkenes, Isoparaffins, NA No No No No and Cycloalkanes 6. Mineral oil 64741-88-4 No No No No 7. Solvent refined 64742-01-4 No No No No residuum US EPA CAA, CWA, TSCA Hazardous Components CAS # EPA CAA EPA CWA EPA TSCA CA (Chemical Name) NPDES PROP 65 -------------------------------------------------------------------------------- 1. Hydro treated light 64742-47-8 No No No No distillate (petroleum) 2. Nonanes NA No No No No 3. C10 Alkenes, Isoparaffins NA No No No No and Cycloalkanes 4.C11 Alkenes, Isoparaffins, NA No No No No and Cycloalkanes 5.C12 Alkenes, Isoparaffins, NA No No No No and Cycloalkanes 6. Mineral oil 64741-88-4 No No No No 7. Solvent refined 64742-01-4 No No No No residuum SARA (Superfund Amendments and Reauthorization Act of 1986) Lists: Sec. 302; EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ. * indicates 10000 LB TPQ if not volatile. Sec. 304: EPA SARA Title III Section 304: CERCLA Reportable + Sec. 302 with Reportable Quantity. ** indicates statutory RQ. Sec. 313: EPA SARA Title III section 313 Toxic Release Inventory. Note: -Cat indicates a member of a chemical category. Sec. 110: EPA SARA 110 Superfund Site Priority Contaminant List. TSCA (Toxic Substances Control Act) Lists: 5A(2): Chemical Subject to Significant New Rules (SNURS) 6A: Commercial Chemical Control Rules 8A: Toxic Substances Subject To Information Rules on Production. 8A CAIR: Comprehensive Assessment Information Rules - (CAIR) 8A PAIR: Preliminary Assessment Information Rules - (PAIR) 8C: Records of Allegations of Significant Adverse Reactions 8D; Health and Safety Data Reporting Rules 8D TERM: Health and Safety Data Reporting Rule Terminations Other Important Lists; CWA NPDES: EPA Clean Water Act NPDES Permit Chemical CAA HAP: EPA Clean Air Act Hazardous Air Pollutant CAA ODC: EPA Clean Air Act Ozone Depleting Chemical (1=CFC,2=HCFC) CA PROP 65: California Proposition 65 Regulatory Information TSCA Inventory: This product and/or its components are listed on the Toxic Substance Control Act (TSCA) inventory. SARA 302/304: The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires facilities subject to Subparts 302 and 304 to submit emergency planning and notification information based on Threshold Planning Quantities (TPQs) and Reportable Quantities (RQs) for "Extremely Hazardous Substances" listed in 40 CFR 302.4 and 40 CFR 355. No components were identified. SARA 311/312: The Superfund Amendments and Reauthorization Act of 1989 (SARA) Title III requires facilities subject to this subpart to submit aggregate information on chemicals by "Hazard Category" as defined in 40 CFR 370.2. This material would be classified under the following hazard categories: Fire Hazard, Acute (Immediate) Health Hazard, and Chronic (Delayed) Health Hazard. SARA 313: This product does not contain any components in concentrations at or above de minims levels that are listed as toxic chemicals in 40 CFR Part 372 pursuant to the requirements 313 of SARA. CERCLA: The Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) requires notification of the National Response Center concerning release of quantities of "hazardous substances" equal to or greater than the reportable quantities (RQ's) listed in 40 CFR 302.4. As defined by CERCLA, the term "hazardous substance" does not include Petroleum, including crude oil or any fraction thereof which is not other Wise specifically designated in 40 CFR 302.4. There are no chemical substances in this product subject to this statute. CWA: This material is classified as an oil under Section 311 of the Clean Water Act (CWA) and the Oil Pollution Act of 1990 (OPA). Discharges or spills which produce which produce a visible sheen on waters of the United States, their adjoining shorelines, or into conduits leading to surface waters must be reported to the EPA's National Response Center at (800) 424-8802. California Proposition 65; this product may contain trace (<5.99 ppm) toluene which is a chemical known to the State of California to cause birth defects, or other reproductive harm, and may, therefore, be subject to requirements of California Health & Safety Code Section 25249.5. New Jersey Right-to-Know Label: For New Jersey labeling refer to components listed in Section 2. Additional Regulatory Remarks: Under the Federal Hazardous Substances Act, related statutes, and Consumer Product Safety Commission regulations, as defined by 16 CFR 1500.14(b)(3) and 1500.83(a)(13): This product contains "Petroleum Distillates" which may require special labeling if distributed in a manner intended or packaged in a form suitable for use in the household or by children. Precautionary label dialogue should display the following: Contains Petroleum Distillates! May be harmful or fatal if swallowed! Keep out of Reach of Children! Under Section 12(b) of TSCA: Because it contains detectable amounts of C9 Aromatic Hydrocarbons, this product might be subject to US EPA's one-time only per country export notification requirements. EPA Hazard Categories; This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated; [X] Yes [ ] No Acute (immediate) Health Hazard [X] Yes [ ] No Chronic (delayed) Health Hazard [X] Yes [ ] No Fire Hazard [ ] Yes [X] No Reactive Hazard [ ] Yes [X] No Sudden Release of Pressure Hazard Regulatory Information Statement The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. Vendor assumes no responsibility for injury to vendee or third person proximately caused by the material if reasonable safety procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety procedures are followed. Furthermore, vendee assumes all risk in use of the material. 16. OTHER INFORMATION Additional Information About This Product DISCLAIMER OF LIABILITY This information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, expressed or implied regarding its correctness. Some information presented and conclusions drawn herein are form sources other than direct test data on the substance itself. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. Users should make their own investigations to determine the suitability of the information or products for their particular purpose. The conditions or methods of handling, storage, use, and disposal of the product are beyond our control and maybe beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising our of or in any way connected with handling, storage, use or disposal of the product. Company Policy or Disclaimer THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT THAT IS ACCURATE TO THE BEST KNOWLEDGE OF EXCELDA MANUFACTURING. THE DATA ON THIS SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED HEREIN. EXCELDA MANUFACTURING ASSUMES NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS DATA. Licensed to Excelda Manufacturing, Inc. ANSI Z400.1 Format
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.