Product Categories See All
Track Order Status
SDS Sheet 0046514Printer Friendly View
SECTION 1: IDENTIFICATION 1.1. Product Identifier Product Form: Product Name: Smell Zapper Bio-Enzymatic Odor Eliminator CAS No: Synonyms: 1.2. Intended Use of the Product Use of the substance/mixture: Odor Neutralizer 1.3. Name, Address, and Telephone of the Responsible Party Company: Smell Away Solutions LLC 9095 Bond St Overland Park, KS 66214 Phone: 1.4. Emergency Telephone Number Emergency | 800-535-5053, 913-244-5752 number | SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance or Mixture Classification (GHS-US) Serious Eye |Category 2A Damage / Eye | Irritation | Skin |Category 1 Sensitization | | 2.2. Label Elements GHS-US Labeling Hazard Pictograms (GHS-US) |Exclamation Mark Signal Word (GHS-US) |WARNING Hazard Statements (GHS-US) |H317: May cause an allergic skin reaction. |H319: Causes serious eye irritation. Precautionary Statements |Prevention: (GHS-US) |P280: Wear protective gloves/protective clothing/eye |protection/face protection. |P261: Avoid breathing |dust/fume/gas/mist/vapours/spray. |Response: |P305+P351+P338: IF IN EYES: Rinse cautiously with |water for several minutes. Remove contact lenses, if |present and easy |to do. Continue rinsing. |P302+P350: IF ON SKIN: Gently wash with plenty of |soap and water. |P304+P340: IF INHALED: Remove to fresh air and keep |at rest in a position comfortable for breathing. |P301+P312: IF SWALLOWED: Call a POISON CENTER or |doctor/physician if you feel unwell. |Storage: |P404: Store in a closed container. |Disposal: |P501: Dispose of contents/container to an approved |waste disposal plant. 2.3. Other Hazards Other Hazards Not Contributing to the Classification: 2.4. Unknown Acute Toxicity (GHS-US) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substance Name |Product identifier |% |Classification | | |(GHS-US) | | | | | | | | | | | | | | | Full text of H-phrases: See Section 16 3.2. Mixture Name |Product identifier |% |Classification | | |(GHS-US) 1,2-Benzisothiazolin-3-one |2634-33-5 |< 5 | Sodium Dodecylbenzenesulfonate |68081-81-2 |< 5 | | | | | | | | | | SECTION 4: FIRST AID MEASURES 4.1. Description of First Aid Measures First-aid Measures General: First-aid Measures After Inhalation: Move person to fresh air; if effects occur, consult a physician. First-aid Measures After Skin Contact: Remove / Take off immediately all contaminated clothing. Rinse skin with water / shower. Call a POISON CENTER or doctor / physician. Remove and wash contaminated clothing before re-use. First-aid Measures After Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately. in case of contact with eyes, rinse immediately with plenty of water. First-aid Measures After Ingestion: Clean mouth with water and afterwards drink plenty of water. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/Injuries: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed SECTION 5: FIRE-FIGHTING MEASURES 5.1. Extinguishing Media Suitable Extinguishing Media: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable Extinguishing Media: 5.2. Special Hazards Arising From the Substance or Mixture Fire Hazard: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action should be taken involving any personal risk or without suitable training. Explosion Hazard: Reactivity: 5.3. Advice for Firefighters Precautionary Measures Fire: Firefighting Instructions: Protection During Firefighting: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures General Measures: 6.1.1. For Non-emergency Personnel Protective Equipment: Emergency Procedures: 6.1.2. For Emergency Responders Protective Equipment: Emergency Procedures: 6.2. Environmental Precautions 6.3. Methods and Material for Containment and Cleaning Up For Containment: Methods for Cleaning Up: SMALL SPILL: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if not water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. LARGE SPILL: Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. 6.4. Reference to Other Sections See heading 8, Exposure Controls and Personal Protection. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for Safe Handling Additional Hazards When Processed: Ensure adequate ventilation. Wear personal protective equipment as required based on a risk assessment. Do not get in eyes, on skin, or on clothing. Do not breathe vapors or spray mist. Remove and wash contaminated clothing before re-use. Wash thoroughly after handling. Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. 7.2. Conditions for Safe Storage, Including Any Incompatibilities Technical Measures: Storage Conditions: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food or drink. Separate from acids. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. 7.3. Specific End Use(s) SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control Parameters 8.2. Exposure Controls Appropriate Engineering |Proper ventilation in accordance with good Controls |industrial hygiene should be provided. Personal Protective Equipment| Materials for Protective | Clothing | Hand Protection | Eye Protection |If splashes are likely to occur, wear: Tightly |fitting safety goggles. Skin and Body Protection |Personal protective equipment for the body should be |selected based on the task being performed and the |risks involved and should be approved by a |specialist before handling this product. Respiratory Protection |If exposure limits are exceeded or irritation is |experienced, NIOSH/MSHA approved respiratory |protection should be worn. Positive-pressure |supplied air respirators may be required for high |airborne contaminant concentrations. Thermal Hazard Protection | SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on Basic Physical and Chemical Properties Physical State |Liquid Appearance |Opaque white Odor |Fragranced Odor Threshold |No data available pH |7.5 to 8.5 Relative Evaporation Rate |Similar to water (butylacetate=1) | Melting Point |No data available Freezing Point |No data available Boiling Point | Flash Point |NA = Not Applicable Auto-ignition Temperature |No data available Decomposition Temperature |No data available Flammability (solid, gas) | Vapor Pressure |No data available Relative Vapor Density at 20 Â°C | Relative Density | Specific Gravity |No data available Solubility |Completely soluble Partition coefficient: | n-octanol/water | Viscosity |Water thin Lower Flammable Limit |0 Upper Flammable Limit |0 9.2. Other Information SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity 10.2 Chemical Stability Stable under recommended storage conditions. 10.3 Possibility of Hazardous Reactions Under normal conditions of storage and use, hazardous reactions will not occur. 10.4 Conditions to Avoid None known based on information supplied. 10.5 Incompatible Materials Strong oxidizing agents. Strong Acids. Strong bases. Reducing agents. 10.6 Hazardous Decomposition Products No data available SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on Toxicological Effects Acute Toxicity: ORAL LD50: 1020 mg/kg ( Rat ) Skin Corrosion/Irritation: Causes skin irritation. Repeated exposure may cause skin dryness or cracking. Serious Eye Damage/Irritation: Causes eye irritation Respiratory or Skin Sensitization: May cause sensitization by skin contact. Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity (Single Exposure): Specific Target Organ Toxicity (Repeated Exposure): Aspiration Hazard: Symptoms/Injuries After Inhalation: Symptoms/Injuries After Skin Contact: Symptoms/Injuries After Eye Contact: Symptoms/Injuries After Ingestion: Chronic Symptoms: Avoid repeated exposure. Repeated contact may cause allergic reactions in very susceptible persons. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity None known. 12.2. Persistence and Degradability 12.3. Bioaccumulative Potential No data available 12.4. Mobility in Soil 12.5. Other Adverse Effects SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste Disposal Recommendations: DISPOSAL METHOD: This material, as supplied, is not a hazardous waste according to federal regulations (40 CFR 261). This material could become a hazardous waste if it is mixing with or otherwise comes in contact with a hazardous waste, if chemical additions are made to this material, or if the material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the altered material is a hazardous waste. Consult the appropriate state, regional, or local regulations for additional requirements. Additional Information: SECTION 14: TRANSPORT INFORMATION 14.1 In Accordance with DOT Proper Shipping Name |Not regulated for domestic ground transportation Hazard Class | |<PICTOGRAM PHRASE> Identification Number| | Label Codes | | ERG Number | 14.2 In Accordance with IMDG Proper Shipping Name | Hazard Class | Identification Number| Label Codes | |<PICTOGRAM PHRASE> ntification Of The | | Substance/m | | EmS-No. (Fire) | | EmS-No. (Spillage) | | 14.3 In Accordance with IATA Proper Shipping Name | Identification Number| |<PICTOGRAM PHRASE> Hazard Class | | Label Codes | | ntification Of The | | Substance/m | | ERG Code (IATA) | SECTION 15: REGULATORY INFORMATION 15.1 US Federal Regulations <COMPONENT> CERCLA (COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPENSATION, AND LIABILITY ACT) CERCLA REGULATORY: This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Re-authorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. SARA Section 311/312 Hazard Classes |FIRE: No |PRESSURE GENERATING: No |REACTIVITY: No |ACUTE: Yes |CHRONIC: No Toxic Substances Control Act (TSCA) |Chemical Name |CAS |1,2-benzisothiazolin-3-one |2634-33-5 |Sodium Dodecylbenzenesulfonate |68081-81-2 15.2 US State Regulations <COMPONENT> CALIFORNIA PROPOSITION 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. SECTION 16: OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION Revision date |6/1/2015 Other |This document has been prepared in accordance with the SDS Information |requirements of the OSHA Hazard Communication Standard 29 CFR |1910.1200. GHS Full Text Phrases: ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | ----| | -- | | Grainger disclaimer.
The information contained in this SDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'SDS' shall be created or inferred by any statement in this 'SDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'SDS'. The user is responsible for full compliance.