Register Now    |    Login

National Distributor of Quality Maintenance Supplies Since 1958

1-800-558-2808

Track Order Status
Order No:
Zip Code:

MSDS Sheet 0046454

Printer Friendly View
        
                            MATERIAL SAFETY DATA SHEET
                              LIQUID RUST INHIBITOR


Flammability    2
Instability     0
Health          2
Special         -

Printed:  02/21/2005
Revision: 02/21/2005
Supercedes Revision:  02/06/2004
Date Created:  02/06/2004


                      1.  PRODUCT AND COMPANY IDENTIFICATION


Product Code:   4645-4 & 4745
Product Name:   Liquid Rust Inhibitor
Reference #:    LAB 407
Manufacturer Information
            Company Name:  Imperial Supplies LLC
                           789 Packer Drive
                           P.O. Box 11008
                           Green Bay, WI  54307-1008
            Emergency Contact:  Chem Tel  (800) 255-3924
            Information:        (800) 558-2808


                    2.  COMPOSITION/INFORMATION ON INGREDIENTS


Hazardous Components     CAS #        Percentage   OSHA     ACGIH   Other Limits
(Chemical Name)                                    PEL      TLV
--------------------------------------------------------------------------------
1. Stoddard solvent      8052-41-3    40.0-50.0 %  525      525     No data
2. Hydrotreated          64742-51-4   1.0-5.09 %   No data  2       No data
     paraffin wax
3. Hydrotreated light    64742-47-8   40.0-50.0 %  No data  No data 200 ppm
    distillate (petroleum)                                          TWA


Hazardous Component    RTECS #       OSHA      OSHA     ACGIH       ACGIH
(Chemical Name)                      STEL      CEIL     STEL        CEIL
--------------------------------------------------------------------------------
1. Stoddard solvent    WJ8925000     No data.  No data.  No data.   No data.
2. Hydrotreated        NA            No data   No data   No data    No data
   paraffin wax
3. Hydrotreated light  OA5504000     No data   No data   No data    No data
    distillate (petroleum)


                            3.  HAZARDS IDENTIFICATION


Emergency Overview
            WARNING:
            COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF INHALED. CAUSES
            EYE IRRITATION. COMPONENT(S) KNOWN TO CAUSE CHRONIC
            HUMAN HEALTH EFFECTS. MAY CAUSE SKIN IRRITATION.

Route(s) of Entry:    Inhalation?  Yes    Skin? Yes   Eyes? Yes   Ingestion? Yes
Potential Health Effects (Acute and Chronic)
            Eye Irritation: Moderate to strong eye irritation. Based on data
from components or similar material.

            Skin Irritation: May cause skin irritation. Based on data from
components or similar materials. Prolonged or repeated skin contact as from
clothing wet with material may cause dermatitis. Symptoms may include redness,
edema, drying, and cracking of the skin.

            Inhalation Toxicity:  High concentrations may cause headaches,
dizziness, nausea, stupor, and other central nervous system effects leading to
visual impairment, difficulty breathing and convulsions.

            Respiratory Irritation: If material is misted or if vapors are
generated from heating , exposure may cause irritation of mucous membranes and
the upper respiratory tract. Based on data from components and similar
materials.

            Dermal Sensitization:  No data available to indicate product or
components may be a skin sensitizer.

            Inhalation Sensitization: No data available to indicate product or
components may be respiratory sensitizers.

            Chronic Toxicity; Repeated overexposure to aliphatic mineral spirits
such as Stoddard Solvent can cause chronic nervous system disease.
Signs and Symptoms of Exposure
            See Potential Health Effects.
OSHA Hazard Classes:
            HEALTH HAZARDS;  Irritant
            PHYSICAL HAZARDS;  Combustible Liquid
            TARGET ORGANS & EFFECTS:  Eyes, Skin, Central Nervous System,
            Respiratory System.


                              4. FIRST AID MEASURES


Emergency and First Aid Procedures
            DO NOT INDUCE VOMITING. If conscious, give 2 glasses of water.
            Aspiration of material due to vomiting can cause chemical
pneumonitis which can be fatal. Get immediate medical attention. If vomiting
occurs naturally, the casualty should lean forward to reduce the risk of
aspiration.

            EYE: Flush immediately with water for at least 15 minutes. Get
immediate medical attention.

            SKIN: Wash with soap and water. Immediately remove contaminated
clothing. Get medical attention if irritation develops. Launder contaminated
clothing before reuse.

            INHALATION:  Remove exposed person to fresh air if adverse effects
are observed. If breathing is labored, administer oxygen. If breathing has
stopped, apply artificial respiration.

Note to Physician
            Treat symptomatically.


                            5. FIRE FIGHTING MEASURES


Flash Pt:         > 108.00 F (42.2 C)    Method Used:  PMCC
Explosive Limits: LEL: unknown  UEL:  unknown
Autoignition Pt:  No data.

Fire Fighting Instructions
            Recommend wearing self-contained breathing apparatus. Water may
cause splattering. Liquid will float on water. Water spray may be used to keep
containers cool to avoid rupturing.

Flammable Properties and Hazards
            Containers may burst upon heating. Toxic fumes, gases or vapors may
evolve on burning of the liquid. Vapors may be heavier than air and may travel
along the ground to a distant ignition source and flash back.

Hazardous Combustion Products
            Smoke, aldehydes, carbon dioxide, carbon monoxide, oxides of
incomplete combustion of hydrocarbons.

Extinguishing Media
            CO2, dry chemical, or foam. Water can be used to cool and protect
exposed material.

Unsuitable Extinguishing Media
            No data available.


                         6.  ACCIDENTAL RELEASE MEASURES


Steps To Be Taken In Case Material Is Released Or Spilled
            Evacuate  all non-essential personnel. Personal Protective Equipment
must be worn. Remove sources of ignition. Ventilate spill area. Prevent entry
into sewers and waterways. Pick up free liquid using non-sparking equipment
and/or non-flammable absorbents for recycle and/or disposal. Residual
liquid can be absorbed on inert material.


                             7.  HANDLING AND STORAGE


Precautions To Be Taken in Handling
            Keep away from potential sources of ignition. Avoid breathing
vapors. Do not discharge into drains or the environment, dispose to an
authorized waste collection point. Wash thoroughly after handling. Empty
containers retain material residue. Do not cut, weld, braze, solder, drill,
grind or expose containers to heat, flame, spark or other sources of
ignition.

Precautions To Be Taken in Storing
            Do not store near potential sources of ignition. Store in well
ventilated area away from heat, sparks and open flame.


                     8. EXPOSURE CONTROLS/PERSONAL PROTECTION


Respiratory Equipment (Specify Type)
            Use NIOSH/MSHA approved full face respirator with a combination
organic vapor and dust/mist cartridge if the recommended exposure limit is
exceeded. Use self-contained breathing apparatus for entry into confined space,
for other poorly ventilated areas and for large spill clean-up sites.

Eye Protection
            Chemical goggles or face shield.

Protective Gloves
            Nitrile.

Other Protective Clothing
            Long sleeve shirt is recommended. Wear either a chemical protective
suit or apron when potential for contact with material exists. Use neoprene or
nitrile rubber boots when necessary to avoid contaminating shoes.

Engineering Controls (Ventilation etc.)
            Use local exhaust ventilation to control mists or vapors. Additional
ventilation or exhaust may be required to maintain air concentrations below
recommended exposure limits. Contains mineral oil. Under conditions which may
generate mists, observe the OSHA PEL of 5 mg per cubic meter, ACGIH STEL of 10
mg per cubic meter.


                       9.  PHYSICAL AND CHEMICAL PROPERTIES


Physical States:     {  } Gas           {X} Liquid       {   } Solid
Melting Point;       No data
Boiling Point;       No data.
Autoignition Pt:     No data.
Flash Pt:            > 108.00 F (42.2 C)    Method:  PMCC
Explosive Limits:    LEL: unknown  UEL: unknown
Specific Gravity (Water = 1):      .78 - .80
Vapor Pressure (vs. Air or mm Hg): No data.
Vapor Density (vs. Air = 1):   Not deter.
Evaporation Rate (vs Butyl Acetate = 1):   Not deter.
Solubility in Water:    Insoluble
Percent Volatitle:      N.D.
Corrosion Rate:         No data.
pH:                     No data
Appearance and Odor:    Liquid is amber colored with a strong odor.


                          10.  STABILITY AND REACTIVITY


Stability;      Unstable {  }                Stable {X}
Conditions To Avoid - Instability
            Material is normally stable at moderately elevated temperatures and
pressures.

Incompatibility - Materials To Avoid
            Oxidizing agents.

Hazardous Decomposition Or Byproducts
            Smoke, carbon monoxide, carbon dioxide, aldehydes and other products
of incomplete combustion.

Hazardous Polymerization:     Will occur {  }              Will not occur {X}

Conditions To Avoid - Hazardous Polymerization
            Will not occur.


                          11.  TOXICOLOGICAL INFORMATION


Toxicological Information
            Oral Toxicity: The LD50 in rats is > 5000 mg/kg. Based on data from
components or similar materials. Swallowing material may cause irritation of the
gastrointestinal lining, nausea, vomiting, diarrhea, and abdominal pain.
Ingestion may cause CNS depression.
Carcinogenicity /Other Information

            Carcinogenicity: This product is formulated with mineral oils which
are considered to be severely refined and not considered to be carcinogenic
under IARC. All of the oils in this product have been demonstrated to contain
less than 3% extractables by the IP 346 test.

            Mutagenicity: No data available to indicate product or any
components present at greater than 0.1 % are  mutagenic or genotoxic.

            Reproductive Toxicity: No data available to indicate either product
or components present at greater than 0.1 % that may cause reproductive
toxicity.

            Teratogenicity: No data available to indicate product or any
components contained at greater than 0.1 % may cause birth defects.

Carcinogenicity:   NTP? No   IARC Monographs? No   OSHA Regulated ? No


                           12.  ECOLOGICAL INFORMATION


Ecological Information
            Freshwater Fish Toxicity: The LC50 is 1- 10 mg/L based on component
data.

            Biodegration: At least 25 % of the components in this product show
moderate biodegradation based on OECD 301-type test data. At least 25% of the
components in this product show moderate biodegradations based on OECD 302-
type test data. BIOCONCENTRATION: 10-25% of the components potentially
bioconcentrate, based on measured octanol/water partition coefficients.
SOIL MOBILITY: Not determined.


                           13.  DISPOSAL CONSIDERATIONS


Waste Disposal Method
            This material, if discarded, is a hazardous waste under RCRA
Regulation 40 CFR 261. Waste management should be in compliance with federal,
state and local laws. Material, if discarded, is expected to be hazardous waste
under RCRA due to ignitability (D001). 0.00005% benzene, CAS no.
71-43-2, D018.
RCRA Waste ID Code:            D001


                            14.  TRANSPORT INFORMATION


LAND TRANSPORT (US DOT)
        DOT Proper Shipping Name
        Flammable liquid n.o.s. (mineral spirits), 3 UN1993, PG III
        DOT Hazard Class:      3
        DOT Hazard Label:      FLAMMABLE LIQUID
        UN/NA Number:          UN1993
        DOT Packing Group:     III
Additional Transport Information
        DOT Hazard determination may be reclassed according to 49 CFR 173.150.


                           15.  REGULATORY INFORMATION


US EPS SARA Title III
Hazardous Components    CAS #      Sec.302   Sec.304   Sec. 313     Sec.110
(Chemical Name)                    (EHS)     RQ        (TRI)
--------------------------------------------------------------------------------
1. Stoddard Solvent     8052-41-3  No        No        No           No
2. Hydrotreated         64742-51-4 No        No        No           No
    paraffin wax
3. Hydrotreated light   64742-47-8 No        No        No           No
    distillate (petroleum)

US EPA CAA, CWA, TSCA
Hazardous Components    CAS #      EPA CAA   EPA CWA   EPA TSCA    CA
(Chemical Name)                              NPDES                 PROP 65
--------------------------------------------------------------------------------
1. Stoddard solvent     8052-41-3   No       No        No          No
2. Hydrotreated         64742-51-4  No       No        No          No
    paraffin wax
3. Hydrotreated light   64742-47-8  No       No        No          No
    distillate (petroleum)

SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:

Sec. 302:  EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ.
           * indicates 10000 LB TPQ if not volatile.
Sec. 304:  EPA SARA Title III Section 304: CERCLA Reportable + Sec. 302 with
           Reportable Quantity.
           ** indicates statutory RQ.
Sec. 313:  EPA SARA Title III Section 313 Toxic Release Inventory. Note: -Cat
           indicates a member of a chemical category.
Sec. 110:  EPA SARA 110 Superfund Site Priority Contaminant List

TSCA (Toxic Substances Control
Act) Lists:
            5A (2);  Chemical Subject to Significant New Rules (SNURS)
            6A;      Commercial Chemical Control Rules
            8A:      Toxic Substances Subject To Information Rules on Production
            8A CAIR: Comprehensive Assessment Information Rules - (CAIR)
            8A PAIR; Preliminary Assessment Information Rules - (PAIR)
            8C:      Records of Allegations of Significant Adverse Reactions
            8D:      Health and Safety Data Reporting Rules
            8D TERM: Health and Safety Data Reporting Rule Terminations

Other Important Lists:
            CWA NPDES:  EPA Clean Water Act NPDES Permit Chemical
            CAA HAP:    EPA Clean Air Act Hazardous Air Pollutant
            CAA ODC:    EPA Clean Air Act Ozone Depleting chemical
(1=CFC,2=HCFC)
            CA PROP 65: California Proposition 65

Regulatory Information

            U.S. TSCA Inventory: All components of this material are on the US
TSCA Inventory.

            Canada DSL: All components are in compliance with the Canadian
            Environmental Protection Act and are present on the Domestic
    Substances List.

            California Prop. 65: This product contains the following chemicals
known to the State of California to cause cancer and/or birth defects based on
maximum Impurity levels of components: cadmium, arsenic, benzene, lead.

EPA Hazard Categories;
            This material meets the EPA 'Hazard Categories' defined for SARA
Title III Sections 311/312 as indicated:
        {X} Yes          { } No          Acute (immediate) Health Hazard
        (X) Yes          { ) No          Chronic (delayed) Health Hazard
        {X} Yes          { } No          No Fire Hazard
        { } Yes          {X} No          No Reactive Hazard
        { } Yes          {X} No          Sudden Release of Pressure Hazard
Regulatory Information Statement
            The information contained herein is based considered accurate.
However, no warranty is expressed or implied regarding the accuracy of this data
or the results to be obtained from the use thereof. Vendor assumes no
responsibility for injury to vendee or third person proximately caused by the
material if reasonable safety procedures are not adhered to as stipulated in the
data sheet. Additionally, vendor assumes no responsibility for injury to vendee
or third persons proximately caused by abnormal use of the material even if
reasonable safety procedures are followed. Furthermore, vendee assumes all risk
in use of the material.


                              16.  OTHER INFORMATION


Company Policy or Disclaimer
            THIS INFORMATION IF FURNISHED WITHOUT WARRANTY,
            EXPRESSED OR IMPLIED, EXCEPT THAT IS ACCURATE TO THE BEST
            KNOWLEDGE OF EXCELDA MANUFACTURING. THE DATA ON THIS
            SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED
            HEREIN. EXCELDA MANUFACTURING ASSUMES NO LEGAL
            RESPONSIBILITY FOR USE OR RELIANCE UPON THIS DATA.


Licensed to Excelda Manufacturing, Inc.             ANSI Z400.1 Format

    

The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.

Feedback