Product Categories See All
Track Order Status
Sheet 0046384Printer Friendly View
MSDS - 4638-4 Material Safety Data Sheet The Blaster Corporation Air Tool Lubricant MSDS Number: ATL Revision Date: 03/24/09 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Air Tool Lubricant Revision Date: 03/24/09 MSDS Number: ATL Product Code: 16-ATL, 128-ATL, 5-ATL, & 55-ATL Manufacturer: The Blaster Chemical Companies, Inc. 8500 Sweet Valley Drive Valley View, Ohio 44125 (216) 901-5800 (216) 901-5801 fax www.blasterproducts.com 24 Hour emergency Chemtrec (800) 424-9300 contact: 2. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous Ingredients CAS # Percent Exposure Limits Heavy Paraffinic Petroleum 64742-65-0 65-80% OSHA (PEL)- 5mg/m3 oil Oil mist ACGIH (TLV)- 5mg/m3 oil mist Light Paraffinic Petroleum 64741-89-5 20-35% OSHA (PEL)- 5mg/m3 oil Oil mist ACGIH (TLV)- 5mg/m3 oil mist Phosphorodithioic Acid 68649-42-3 >1% None established 3. HAZARDS IDENTIFICATION Routes of Entry: Eyes, skin inhalation, ingestion Target Organs: Inhalation: Inhalation of spray mist may cause irritation to the respiratory tract. Skin Contact: Repeated or prolonged contact with skin may cause mild irritation and possibly dermatitis. Eye Contact: Likely to cause immediate or delayed irritation. Irritation will show as redness and or swelling of the eyes. Ingestion: Low toxicity. Will have a laxative effect if swallowed. 4. FIRST AID MEASURES Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Continue to monitor. Get medical attention. Skin Contact: Remove contaminated clothing immediately! Wash skin with soap and water. If irritation develops, seek medical attention. Eye Contact: Flush eye(s) with water for 15 minutes. Get medical attention. If eye irritation persists, obtain medical treatment. Ingestion: Do not induce vomiting! Get medical attention or advice. 5. FIRE FIGHTING MEASURES Flash Point: >360F (COC) Auto-ignition >600F temperature: Extinguishing Media: Dry chemical. Carbon dioxide, water fog or foam. 6. ACCIDENTAL RELEASE MEASURES Small Absorb the liquid and scrub the area with detergent and water. Spill: Large Avoid vapors, sources of ignition, sewers and waterways. Absorb with Spill: suitable absorbent. Disposal: Dispose of liquid and absorbents in accordance with local, state and federal laws. 7. HANDLING AND STORAGE Handling Precautions: Use in accordance with good industrial workplace practices. Avoid unnecessary contact. Wash thoroughly after handling. Use with good ventilation. Storage Requirements: Keep containers tightly closed and in a cool well-ventilated place. Always store this material in closed labeled containers. Store away from strong oxidizers. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Controls: Eye wash stations and emergency showers should be immediately available. Protective Equipment: Eyes and Face: Standard safety glasses with splash shields typically offer adequate protection. Where excessive splashing or spraying is possible, a face shield should be used. Skin and clothing: Excessive contact should be avoided. Neoprene gloves, boots and aprons will provide adequate protection when contact cannot be avoided. Remove and wash any contaminated clothing immediately. Wash thoroughly after handling. Respiratory: Good general ventilation should be sufficient to control airborne levels. Maintain airborne concentrations below OSHA established exposure limits of ingredients in Section 2. Exposure The Blaster Chemical Companies takes no responsibility Guidelines/Other: for determining what measures are required for personal protection in any specific application. This information should be used with discretion. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Oily Physical State: Liquid Odor: Typical petroleum pH: Not Determined Vapor Pressure: Not applicable Vapor Density: >1 (air=1) Boiling Point: 700-860F Freezing/Melting Pt.: Not determined Solubility: Nil Spec Grav./Density: 0.86 (water=1) Heat Value: Not determined VOC: Not determined Evap. Rate: <1 (butyl acetate= 1) Bulk Density: Not determined Octanol: Not applicable Molecular Weight: Not determined Particle Size: Not applicable Softening Point: Not applicable Viscosity: 100 SUS Percent Volatile: Nil Sat. Vap. Concentrate.: Not determined Molecular Formula: Not determined 10. STABILITY AND REACTIVITY Stability: This product is stable. Conditions to avoid: Avoid excessive heat, sources of ignition and excessive water. Materials to avoid Avoid contact with strong oxidizing agents and (incompatibility): strong reducing agents (strong acids or bases.) Avoid mixture with water. Hazardous Decomposition Carbon monoxide, carbon dioxide, and various products: hydrocarbons. Hazardous Polymerization: Will not occur. 11. TOXICOLOGICAL INFORMATION No toxicological information has been established for this product or its components. 12. ECOLOGICAL INFORMATION Ecotoxicity Component Analysis: Phosphorodithioic Acid (68649-42-3) Aquatic Toxicity 96 hr LC50 Pimephales Promelas 1-5 mg/L (static) 48 hr EC50 Daphnia Magna 1-1.5 mg/L No other ecological information has been established for this product or its components. 13. DISPOSAL CONSIDERATIONS Used or unused product should be disposed of in accordance with local, state and federal regulations. Some special regulations may exist for the disposal of empty aerosol containers. Empty containers may contain residual pressure and contents. They should be handled with the same precautions as the product. 14. TRANSPORT INFORMATION Not regulated as a hazardous material. 15. REGULATORY INFORMATION. No component of this product is listed as a carcinogen by OSHA, IARC, ACGIH or NTP. This product is not known to contain any chemicals currently listed as carcinogens or reproductive toxins under California Proposition 65. This product contains no material subject to the reporting requirements of SARA Title III (Section 313.) 16. OTHER INFORMATION Manufacturer's Disclaimer: To the best of our knowledge, the information contained herein is accurate. However, neither The Blaster Chemical Companies nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazard which exists. HMIS Ratings: Health: 0 Fire: 1 Reactivit 0 y:
The information contained in this was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this '' shall be created or inferred by any statement in this ''. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this ''. The user is responsible for full compliance.