Product Categories See All
Track Order Status
MSDS Sheet 0046360Printer Friendly View
MATERIAL SAFETY DATA SHEET SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 4637 GALLON NON-CHLOR BRK CL IDENTIFICATION NUMBER: A-1126 0147-77 DATE PRINTED: 01/05/09 PRODUCT USE/CLASS: BRAKE CLEANER MANUFACTURED FOR: IMPERIAL SUPPLIES LLC 789 ARMED FORCES DRIVE P.O. BOX 11008 GREEN BAY, WISCONSIN 54307 PHONE: 920-494-7474 EMERGENCY TELEPHONE: EMERGENCY AGENCY/CHEM TEL: 920-494-7474 800-255-3924 MON-FRI/8:00 AM - 5:00 PM 24 HOURS PREPARER: CUSTOMER SERVICE, PHONE: PREPARE DATE: 01/05/09 SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS ITEM CHEMICAL NAME CAS NUMBER WT/WT% LESS THAN 01 2-PROPANONE 67-64-1 80.0% 02 N-HEPTANE 142-82-5 15.0% 03 TOLUENE 108-88-3 15.0% EXPOSURE LIMITS: ACGIH OSHA COMPANY ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN 01 750 PPM 1000 PPM 750 PPM N.E. N.E. NO 02 400 PPM 500 PPM 400 PPM 500 PPM N.E. YES 03 50 PPM 150 PPM 100 PPM 150 PPM N.E. NO (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION *** EMERGENCY OVERVIEW *** Vapors irritating to eyes and respiratory tract. High vapor concentrations may cause drowsiness. EFFECTS OF OVEREXPOSURE - EYE CONTACT: Liquid, aerosols and vapors of this product are irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation and/or a feeling like that of fine dust in the eyes. EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). EFFECTS OF OVEREXPOSURE - INHALATION: Headaches, dizziness, nausea, decreased blood pressure, changes in heart rate and cyanosis may result from over- exposure to vapor or skin exposure. Prolonged inhalation may be harmful. EFFECTS OF OVEREXPOSURE - INGESTION: This material may be harmful or fatal if swallowed. EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Over-exposure may cause nervous system damage. PRIMARY ROUTE (S) OF ENTRY: SKIN CONTACT SKIN ABSORPTION INHALATION INGESTION EYE CONTACT SECTION 4 - FIRST AID MEASURES FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists. FIRST AID - SKIN CONTACT: Immediately flush skin with plenty of water. Remove clothing. Get medical attention immediately. Wash clothing separately before reuse. FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. FIRST AID - INGESTION: Get medical attention immediately. If swallowed, do NOT induce vomiting. Give victim a glass of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: -4 F LOWER EXPLOSIVE LIMIT: 1.0% UPPER EXPLOSIVE LIMIT: 12.8% AUTO IGNITION TEMPERATURE: ND EXTINGUISHING MEDIA: ALCOHOL FOAM CO2 DRY CHEMICAL FOAM WATER FOG UNUSUAL FIRE AND EXPLOSION HAZARDS: "Empty" containers retain product residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD, BRAZE,SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR DEATH. Empty drums should be completely drained, properly bunged and promptly returned to a drum reconditioner, or properly disposed of. SPECIAL FIREFIGHTING PROCEDURES: Containers can build up pressure if exposed to heat (fire). As in any fire, wear self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. SECTION 6 - ACCIDENTAL RELEASE MEASURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. SECTION 7 - HANDLING AND STORAGE HANDLING: Wash thoroughly after handling. STORAGE: Keep away from heat, sparks and flame. Keep from freezing. SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any air contaminants to within their TLVs during the use of this product. RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. SKIN PROTECTION: No Information EYE PROTECTION: Wear safety glasses with side shields (or goggles) and a face shield. OTHER PROTECTIVE EQUIPMENT: STANDARD INDUSTRIAL CLOTHING STANDARDS SHOULD BE FOLLOWED. HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they may retain product residues. Avoid prolonged or repeated contact with skin. Avoid breathing vapors from heated material. Avoid contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE: 132 - 232 F VAPOR DENSITY: Is heavier than air ODOR: SOLVENT ODOR THRESHOLD: ND APPEARANCE: CLEAR EVAPORATION RATE: Is faster than Butyl Acetate SOLUBILITY IN H20: MISCIBLE FREEZE POINT: ND SPECIFIC GRAVITY: 0.7833 VAPOR PRESSURE: ND Ph @ 0.0%: NA PHYSICAL STATE LIQUID VISCOSITY: ND COEFFICIENT OF WATER/OIL DISTRIBUTION: VOLATILE ORGANIC COMPOUNDS (VOCS): 1.34 LBS/GAL, 161 GRAMS/LTR (See Section 16 for abbreviation legend) SECTION 10 - STABILITY AND REACTIVITY CONDITIONS TO AVOID: ALL SOURCES OF IGNITION, WELDING ARCS, AND OPEN FLAMES. INCOMPATIBILITY: STRONG ACIDS, ALKALIS, OXIDIZERS, AND AMINES. HAZARDOUS DECOMPOSITION PRODUCTS: OXIDES OF CARBON, OXIDES OF NITROGEN, AND MAY PRODUCE FORMS OF CHLORIDE, CHLORINE, AND PHOSGENE. HAZARDOUS POLYMERIZATION: Will not occur under normal conditions. STABILITY: This product is stable under normal storage conditions. SECTION 11 - TOXICOLOGICAL PROPERTIES PRODUCT LD50: 3200 mg/kg PRODUCT LC50: 52756 ppm COMPONENT TOXICOLOGICAL INFORMATION: CHEMICAL NAME LD50 LC50 2-PROPANONE 5800 MG/KG/RAT 50100 MG/M3/8H/RAT N-HEPTANE >7100 MG/KG/RAT 103000 MG/M3/4H/RA TOLUENE 636 MG/KG/RAT 49000 MG/M3/4H/RAT BENZENE 930 MG/KG N.E. SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No Information. SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE, AND LOCAL REGULATIONS. SECTION 14 - TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME: COMPOUNDS, CLEANING LIQUID DOT TECHNICAL NAME: (CONTAINS ACETONE) DOT HAZARD CLASS: 3 HAZARD SUBCLASS: DOT UN/NA NUMBER: NA1993 PACKING GROUP: II RESP. GUIDE PAGE: SECTION 15 - REGULATORY INFORMATION U.S. FEDERAL REGULATIONS: AS FOLLOWS - OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) CERCLA - SARA HAZARD CATEGORY: This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD SARA SECTION 313: This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: CHEMICAL NAME CAS NUMBER WT/WT% IS LESS THAN TOLUENE 108-88-3 15.0% TOXIC SUBSTANCES CONTROL ACT: This product contains the following chemical substances subject to the reporting requirements Of TSCA 12(B) if exported from the United States: CHEMICAL NAME CAS NUMBER N-HEPTANE 142-82-5 U.S. STATE REGULATIONS: AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW: The following materials are non-hazardous, but are among the top five components in this product: CHEMICAL NAME CAS NUMBER No non-hazardous materials are among the top five ingredients PENNSYLVANIA RIGHT-TO-KNOW: The following non-hazardous ingredients are present in the product at greater than 3%: CHEMICAL NAME CAS NUMBER No non-hazardous materials are present at greater than 3% CALIFORNIA PROPOSITION 65: WARNING: The chemicals (s) noted below and contained in this product, are known to the state of California to cause cancer, birth defects or other reproductive harm: CHEMICAL NAME CAS NUMBER TOLUENE 108-88-3 BENZENE 71-43-2 INTERNATIONAL REGULATIONS: AS FOLLOWS - CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS: No information available SECTION 16 - OTHER INFORMATION HMIS RATINGS - HEALTH: 2 FLAMMABILITY: 4 REACTIVITY: 0 PREVIOUS MSDS REVISION DATE: 01/05/09 REASON FOR REVISION: UPDATE LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined *** THIS MSDS IS NOT FOR REPRODUCTION OR REPRODUCTION OR DISTRIBUTION *** The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations. <END OF MSDS>
The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this 'MSDS' shall be created or inferred by any statement in this 'MSDS'. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this 'MSDS'. The user is responsible for full compliance.